Philips 191el1sb User Manual

							
Connecting to Your PC
 (b)Connect the monitor signal cable to the video connector on the back of y\
our 
computer.
 (c)Plug the power cord of your computer and your monitor into a nearby outl\
et.
 (d)Turn on your computer and monitor. If the monitor displays an image, 
installation is complete.
 
RETURN TO TOP OF THE PAGE 
      
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/install/connect.htm (3 of 3)2009/9/11 NSH 01:35:55 
						

							
The Base
  
       
 
  
 •Front View Product 
Description
 • Accessory Pack
 • Connecting to your PC
 • Getting Started 
 • Optimizing Performance
 • Remove the Base
   
   
   
   
  
 
The Base
Remove the Base
Condition:
l     for VESA standard mounting applications
Press the release-button ,then disassemble the base from the LCD Monitor\
.
 
Note: This monitor accepts a 100mmx100mm VESA-Compliant mounting interface.
    
 
 
 
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/install/base.htm (1 of 2)2009/9/11 NSH 01:35:56 
						

							
The Base
 
RETURN TO TOP OF THE PAGE 
 
 
      
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/install/base.htm (2 of 2)2009/9/11 NSH 01:35:56 
						

							
Getting Started
  
       
  Your LCD Monitor :
 •Front View Product 
Description
 • Setting Up and Connecting 
Your Monitor
 • Getting Started 
 • Optimizing Performance
   
 
 
  
  
  
  
  
 
Getting Started 
Getting Started 
Use the information file ( .inf) for Windows® 95/98/2000/Me/XP/Vist\
a or later 
The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play\
 requirements for 
Windows® 95/98/2000/Me/XP/Vista. This information file ( .inf) shou\
ld be installed in order that 
your Philips monitor can be enabled from the Monitor dialog box in Win\
dows® 95/98/2000/Me/
XP/Vista and the Plug & Play application can be activated. The installat\
ion procedure based on 
Windows® 95 OEM Release 2 , 98 , 2000 , Me, XP and Vista is specified\
 as follows.
For Windows® 95 
1.  Start Windows® 95 
2.  Click on the Start button, point to Settings, and then click on Con\
trol Panel. 
3.  Double click on the Display Icon. 
4.  Select the Settings tab then click on Advanced.... 
5.  Select the Monitor button, point to Change... then click on Have Di\
sk.... 
6.  Click on the Browse... button, select the appropriate drive F: ( CD-R\
OM Drive) then click 
on the OK button. 
7.  Click on the OK button then select your monitor model and click on OK\
. 
8.  Click on the Close button. 
For Windows® 98 
1.  Start Windows® 98 
2.  Click on the Start button, point to Settings, and then click on Con\
trol Panel. 
3.  Double click on the Display Icon. 
4.  Select the Settings tab then click on Advanced.... 
5.  Select the Monitor button, point to Change... then click on Next 
6.  Select Display a list of all the drivers in a specific location, so you\
 can choose the driver 
you want. then click on Next and then click on Have Disk.... 
7.  Click on the Browse... button, select the appropriate drive F: ( CD-R\
OM Drive) then click 
on the OK button. 
8.  Click on the OK button then select your monitor model and click on the\
 Next button. 
9.  Click on the Finish button then the Close button. 
For Windows® 2000 
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/install/gt_start.htm (1 of 3)2009/9/11 NSH 01:35:57 
						

							
Getting Started
 
1.  Start Windows® 2000 
2.  Click on the Start button, point to Settings, and then click on Con\
trol Panel. 
3.  Double click on the Display Icon. 
4.  Select the Settings tab then click on Advanced.... 
5.  Select Monitor  
- If the Properties button is inactive, it means your monitor is prope\
rly configured. Please 
stop installation.  
- If the Properties button is active. Click on Properties button. Pl\
ease follow the steps 
given below. 
6.  Click on Driver and then click on Update Driver... then click on the\
 Next button. 
7.  Select Display a list of the known drivers for this device so that I ca\
n choose a specific 
driver, then click on Next and then click on Have disk.... 
8.  Click on the Browse... button then select the appropriate drive F: ( \
CD-ROM Drive). 
9.  Click on the Open button, then click on the OK button. 
10.  Select your monitor model and click on the Next button. 
11.  Click on the Finish button then the Close button.  
If you can see the Digital Signature Not Found window, click on the Y\
es button. 
For Windows® Me 
1.  Start Windows® Me 
2.  Click on the Start button, point to Settings, and then click on Con\
trol Panel. 
3.  Double click on the Display Icon. 
4.  Select the Settings tab then click on Advanced.... 
5.  Select the Monitor button, then click on Change... button. 
6.  Select Specify the location of the driver(Advanced) and click on the\
 Next button. 
7.  Select Display a list of all the drivers in a specific location, so you\
 can choose the driver 
you want, then click on Next and then click on Have Disk.... 
8.  Click on the Browse... button, select the appropriate drive F: ( CD-R\
OM Drive) then click 
on the OK button. 
9.  Click on the OK button, select your monitor model and click on the Ne\
xt button. 
10.  Click on Finish button then the Close button. 
For Windows® XP
1.  Start Windows® XP
2.  Click on the Start button and then click on Control Panel.
3.  Select and click on the category Printers and Other Hardware
4.  Click on the Display Item.
5.  Select the Settings tab then click on the Advanced button.
6.  Select Monitor tab 
- If the Properties button is inactive, it means your monitor is prope\
rly configured. Please 
stop installation. 
- If the Properties button is active, click on Properties button. 
Please follow the steps below.
7.  Click on the Driver tab and then click on Update Driver... button.
    
 
 
 
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/install/gt_start.htm (2 of 3)2009/9/11 NSH 01:35:57 
						

							
Getting Started
8.  Select the Install from a list or specific location [advanced] radio b\
utton and then click on 
the Next button.
9.  Select the Dont Search. I will choose the driver to install radio but\
ton. Then click on the 
Next button.
10.  Click on the Have disk... button, then click on the Browse... button\
 and then select the 
appropriate drive F: (CD-ROM Drive).
11.  Click on the Open button, then click the OK button.
12.  Select your monitor model and click on the Next button. 
- If you can see the has not passed Windows® Logo testing to verify \
its compatibility with 
Windows® XP message, please click on the Continue Anyway button. 
13.  Click on the Finish button then the Close button.
14.  Click on the OK button and then the OK button again to close the Dis\
play_Properties 
dialog box.
For Windows® Vista
1.  Start Windows® Vista 
2.  Click the Start button; select and click on Control Panel. 
3.  Select and click on Hardware and Sound 
4.  Choose Device Manager and Click on Update device drivers. 
5.  Select Monitor and then right click on Generic PnP Monitor. 
6.  Click on Update Driver Software. 
7.  Select Browse my computer for driver software. 
8.  Click the Browsebutton and choose the drive in which youve placed the\
 disk. Example:
(CD-ROM Drive:\\Lcd\PC\drivers\). 
9.  Click the Next button. 
10.  Wait few minutes for installing the driver, and then click Close butto\
n.
If your Windows® 95/98/2000/Me/XP/Vista version is different or you n\
eed more detailed 
installation information, please refer to your Windows® 95/98/2000/Me\
/XP/Vista users manual.
RETURN TO TOP OF THE PAGE
      
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/install/gt_start.htm (3 of 3)2009/9/11 NSH 01:35:57 
						

							
On-Screen Display
  
       
  •Description of the On-Screen 
Display
 • The OSD Tree
On-Screen Display
Description of the On Screen Display
What is the On-Screen Display?
This is a feature in all Philips LCD monitors. It allows an end user to \
adjust screen performance of 
the monitors directly through an on-screen instruction window. The user \
interface provides user-
friendliness and ease-of-use when operating the monitor.
 
Basic and simple instruction on the control keys.
When you press the  button on the front control of your monitor, the On-Screen Display 
(OSD) Main Controls window will pop up and you can then start making a\
djustments to your 
monitors various features. Use the 
 keys to make your adjustments.
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/osd/osddesc.htm (1 of 3)2009/9/11 NSH 01:35:46 
						

							
On-Screen Display
 
RETURN TO TOP OF THE PAGE
The OSD Tree
Below is an overall view of the structure of the On-Screen Display. You \
can use this as a reference 
when you want to work your way around the different adjustments later on\
.
    
 
 
 
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/osd/osddesc.htm (2 of 3)2009/9/11 NSH 01:35:46 
						

							
On-Screen Display
 
RETURN TO TOP OF THE PAGE
 
      
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/191EL1\
/osd/osddesc.htm (3 of 3)2009/9/11 NSH 01:35:46 
						

							
Customer Care & Warranty
  
       
 
  
  
  
  
  
 
Customer Care & Warranty
PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR 
WARRANTY COVERAGE
WESTERN EUROPE: • Austria • Belgium • Denmark • France • Germany  
• 
Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway  
• 
Portugal • Sweden • Switzerland • Spain • United Kingdom • Poland
EASTERN EUROPE: • Czech Republic • Hungary • Russia • Slovakia • Slovenia  
• 
Turkey
LATIN AMERICA: • Argentina • Brasil
NORTH AMERICA: • CANADA • USA
PACIFIC: • Australia • New Zealand
ASIA: • China • Hong Kong • India • Indonesia • Korea • Malaysia • Pakistan  
• 
Philippines • Singapore • Taiwan • Thailand • Vietnam
AFRICA: • South Africa
MIDDLE EAST: • United Arab Emirates
  
 
    
 
 
 
      
file:///D|/Rachel/PHILIPS/191EL1/191EL1%20EDFU/lcd/manual/ENGLISH/warran\
ty/warranty.htm2009/9/11 NSH 01:35:47