Pcs Phone Handspring Treo 300 User Guide

Section 6
Application-Specific Tasks 93
Application 
Ta s k s
6
 
6.Select a new label.
7.Hold Option   and press Return   to finish.
Changing Contact entry details
The Contact Entry Details dialog box provides a variety of options that 
you can associate with an entry. 
To open the Contact Entry Details dialog box:
1.
Select the name for the entry whose details you want to change.
2.Press Space   to open the entry.
3.Press Menu  .
4.Under Record, select Edit Contact (/E).
5.Press Menu  .
6.Under Record,...

Section 6
94 Application-Specific Tasks
Using the Call History view
The Call History view provides quick access to the previous 1,000 
incoming and outgoing calls.
If you miss a call when your PCS Treo 300 is on and you remain in a 
coverage area, your missed calls appear in the Call History list and you 
receive a missed call alert message. When your phone is off or you travel 
outside a coverage area, your missed calls are forwarded to voicemail and 
they do not appear in the Call History list....

Section 6
Application-Specific Tasks 95
Application 
Ta s k s
6
Calling a number in your Call History list
In addition to viewing a list of your incoming, outgoing, and missed 
calls, you can use the Call History view to dial any number that appears 
on this view.
To dial a number from the Call History view:
1.
Make sure wireless mode is on. See page 10 for details.
2.Use the scroll buttons to select the number you want to call. 
3.Press Space   to dial.
Ti p :  If you need to prepend digits, such as an...

Section 6
96 Application-Specific Tasks
 
2.Press Menu  .
3.Under Record, select Add (/N).
4.In the Contact Edit screen, enter any additional information.
5.Hold Option   and press Return   to finish.
Ti p :  To add a number to your Speed Dial list, press Menu  , under Record, select Details (/E), tap Copy Phone #, go to the Speed Dial view, 
open the Edit Speed Dial screen for the entry where you want to add the 
number, scroll to the Number field, and then press Menu  , under 
Edit, select Paste (/P)...

Section 6
Application-Specific Tasks 97
Application 
Ta s k s
6
3.Select the purge option you want to use.
4.Hold Option   and press Return   to finish.
Using the Active Call view
After you dial and establish a connection, or receive an incoming call, 
the Active Call view icon appears in the lower left corner of the 
PhoneBook screen, and the Active Call view appears:
 
 
Note: If you dialed an entry that includes predefined Extra Digits and you 
did not enable automatic dialing of Extra Digits, the...

Section 6
98 Application-Specific Tasks
 
To answer a call while it is ringing, do any of the following:
©Open the lid if it is closed.
©Tap Answer if the lid is open.
©Press the button on the headset (if it is attached).
To ignore a call and send it directly to voicemail, do any of the
following: 
©Close the lid if it is open.
©Press the top scroll button.
Note: It takes approximately 30 seconds to send the call to voicemail. 
During this interval you can receive another incoming call, but you cannot...

Section 6
Application-Specific Tasks 99
Application 
Ta s k s
6
To end a call, do any of the following: 
©Close the lid (if the headset is not attached).
©Press Backspace  .
©Press the button on the headset (if it is attached).
©Tap Hang Up.
Note: Pressing the power button while a call is active puts your phone into sleep mode. It does not end the call.
Adjusting call volume
You can adjust the volume level from the Active Call view when a call is 
in progress.
To adjust the call volume, do one of the...

Section 6
100 Application-Specific Tasks
Using the speakerphone
The speakerphone button enables you to view your phone screen and use 
other applications while you’re talking on the phone. 
Note: The speakerphone feature is optimized for one or two people that 
are reasonably close to the phone. It is not designed for a conference 
room or large group. This feature is not available when a headset is 
attached to your phone.
To use the speakerphone:
1.
Place a call.
2.From the Active Call screen, tap...

Section 6
Application-Specific Tasks 101
Application 
Ta s k s
6
 
 
2.Tap Hold to place the call on hold.
3.Tap Off Hold to return to the call.
Handling Multiple Calls
You can use the Active Call view to handle a variety of situations that 
involve multiple calls. During an active call, you can receive or place 
another call, switch between two active calls, and create a 3-way 
conference call. For example, when you’re talking to a friend, you can 
place another call to a restaurant to make dinner...

Section 6
102 Application-Specific Tasks
 
Ti p :  You can switch between two active calls by tapping Swap or by 
pressing the button on the headset (if it is attached). The Swap button 
appears only when the second call is an incoming call.
To dial another number while a call is in progress:
1.
Place the first call on hold.
2.From the Active Call view, repeatedly press PhoneBook   to access 
the view you want to use.
Ti p :  You can also tap the Speed Dial, Dial Pad, Contacts, or Call History view...