Panasonic Wv Nw474s Operating Instructions Manual

Model No.WV-NW474S
Color CCTV Camera
Operating Instructions
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
FRANÇAIS
ENGLISH 

-2-
WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall not be exposed
to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the products enclo-
sure that may be of sufficient magni-
tude to constitute a risk of...

-3-
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-
fiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or...

-4-
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS  ............................................................................ 3
PREFACE ......................................................................................................................... 5
Features ........................................................................................................................ 5
System Requirements  ......................................................................................................

-5-
Features
•10/100BASE-T terminal enabling you to view camera
images via the network
•User/Host authentication
•SD-II (Super Dynamic) expands the dynamic range
up to 46 dB without interference between dark and
bright portions in a scene.
•High adaptability to environmental changes
Auto light control (ALC)
B/W and color switching (AUTO, EXT)
Electric sensitivity enhancement (SENS UP)
Electric shutter speed control
Electric zooming (EL-ZOOM)
Sync: VD2, Line-lock, Internal
White balance: AWC, ATW
•Picture...

-6- •Ethernet is a registered trademark of Xerox
Corporation.
•Other names of companies and products contained
in these operating instructions may be trademarks
or registered trademarks of their respective owners.
•Distributing, copying, disassembling, reverse com-
piling, reverse engineering, and also exporting in
violation of export laws of the software provided with
this product, is expressly prohibited.
Document Convention
These operating instructions use the following conven-
tions when describing...

-7-
1. This product should be installed and connected
in conformity with NEC by qualified service per-
sonnel or system installers.
2. Use a class 2 power source supplying 24 V AC.
3. To prevent fire or electric shock hazard, use a UL
listed cable (VW-1, style 1007) to connect the
power supply to the camera.
4. Be sure to use a ceiling board/wall having
enough strength to support this camera. 
5. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or
covers.
There...

-8-
MAJOR OPERATING CONTROLS & THEIR FUNCTIONS
A
B
LEFTRIG
H
TUPDO
W
NSET
LINK
LED
OFFLED
ON RCV
A
B
LEFT
RIG
HT
UP
DO
W
N
SET
LINK
LED
OFFLED
ONRCV
u
i
o !0
!1!2
!3
!4
!5
!6
!7
!9
!8
t
r q
y
w
Transport Protection 
Screws (Red)
e
qTilting lock screw
Fixes the tilting position.
wPanning table
Adjusts the panning angle of the camera.
eAzimuth adjuster
Adjusts the azimuth angle to level the image.
rPan lock screw
Fixes the panning position.
tZoom lock lever
Fixes the zoom position after adjustment.
yFocus...

-9-
!7Set button (SET)
Validates the selection or opens a detailed menu.
!8DIP switch
Specifies certain settings shown in the figure. The
default setting is marked with an asterisk *.
Note: The settings will be applied to the camera
only when DIP SW, not MENU, is selected in the
menu setup.
!9Monitor output jack
Connects to the LCD monitor and other devices with
a 3.5 diam. 2-pole L-type plug for checking images.
@0Dome cover
@1Network port
Connects to a PC or a network via a hub with a...

An example of flush mounting is shown. This example
shows two boxes: one is for camera mounting and the
other is for cable junction.
1. Procurement
•Four screws 
Locally procure four bracket fixing screws suitable
for the installation surface and structure of the
wall/ceiling or junction box.
•Junction box 
When planning to use a junction box(s), procure one
locally that meets the dimensions in the figure.
2. Installation space
Prepare a space on the surface measuring ø175 mm or
more.
3. Cable route...