Panasonic Wv Np244 Network Operating Instructions Manual

Step 1
Set the video motion detection area by dragging the
mouse on the screen. When the [All areas] button is
clicked, the whole area will become the VMD area, and
1 (White) will be automatically applied to Area.
→The designated area will become the VMD area and
the outline will be displayed. When 2 - 4 VMD areas
are set, each area will be numbered in order. The areas will be identified by the respective outline
colors. 
Step 2
Select ON or OFF for Status of each VMD area.
When the [SET] button is...

32
Delete the set VMD area
Step 1
Click the [Delete] button respective to the area to be
deleted. 
→The outline of the area will disappear. 
Step 2
Click the [SET] button. 
→The deletion will be completed. 
Important:
The deletion will not be completed unless the [SET]
button is clicked.  

33
Configure the settings relating to the mail notification [Notification]
Click the [Notification] tab on the Alarm setup page. (☞page 16)
The settings relating to the alarm mail can be configured on this page. \
To notify of an alarm occurrence by e-mail, it
is necessary to configure the settings of the mail server. (
☞page 37)
[E-mail notification]
Select ON or OFF to determine whether or not to
notify of an alarm occurrence by e-mail at an alarm
occurrence. 
Default:OFF
[Attach image]
Select ON or...

34
Configure the settings relating to Panasonic alarm protocol [Panasonic a\
larm
protocol]
Click the [Notification] tab on the Alarm setup page. (☞page 16)
The settings relating to Panasonic alarm protocol can be configured on t\
his page. 
[Panasonic alarm protocol]
Select ON or OFF to determine whether or not to
notify of an alarm occurrence by Panasonic alarm proto-
col when an alarm is detected. 
Default:OFF
Note:
When ON is selected, the alarm occurrence will be
notified to the registered...

35
Configure the settings relating to the authentication
[Authentication setup]
The settings relating to the authentication such as users and PCs restri\
ctions for accessing the camera can be con-
figured on this page. 
The Authentication setup page has 2 tabs of the [User] tab and the [Ho\
st] tab. 
Configure the settings relating to the user authentication [User]
Click the [User] tab on the Authentication setup page. (☞page 16)
The settings relating to the user authentication can be configured on th\...

36
Configure the settings relating to the host authentication [Host]
Click the [Host] tab on the Authentication setup page. (☞page 16)
The settings to restrict PCs (IP address) to access the camera can be \
configured on this page. 
[Host authentication]
Select ON or OFF to determine whether or not to
authenticate the host. 
Default:OFF
Important:
Before configuring the host authentication, it is nec-
essary to register IP addresses of the PCs to be
allowed to access the camera and determine their
access...

37
Configure the settings of the servers [Server setup]
The settings relating to the mail server and the FTP server can be confi\
gured on this page. 
The Server setup page has 2 tabs of the [Mail] tab and the [FTP] tab. \
Configure the settings relating to the mail server [Mail]
Click the [Mail] tab on the Server setup page. (☞page 16)
The settings relating to the mail server used to send the alarm mail can\
 be configured on this page. 
[SMTP server address]*
Enter the IP address or the host name of...

38
Configure the settings relating to the FTP server [FTP]
Click the [FTP] tab on the Server setup page. (☞page 16)
The settings relating to the FTP server used to transmit the alarm image\
s can be configured on this page. 
[FTP server address]
Enter the IP address or the host name of the FTP serv-
er. 
Number of characters for the FTP server address:
1 - 128 characters
Important:
When entering the host name for FTP server
address, it is necessary to configure the DNS set-
tings on the [Network] tab of...

39
Configuring the network settings [Network setup]
The network settings and the settings relating to DDNS (Dynamic DNS) a\
nd SNMP (Simple Network management
Protocol) can be configured on this page. 
The Network setup page has 3 tabs of the [Network] tab, the [DDNS] tab\
, the [SNMP] tab and the [FTP] tab. 
Configure the network settings [Network]
Click the [Network] tab on the Network setup page. (☞page 16)
The following information is required to configure the network settings.\
 
Contact the network...

40
[Default gateway]
When not using the DHCP function, enter the default
gateway of the camera. 
Default:192.168.0.1

0. *. *. *
*. *. *. 0
255. *. *. *
*. *. *. 255
127.0.0.1
Class D address (224.0.0.0 - 239.255.255.255)
Class E address (240.0.0.0 - 255.255.255.255)
Note:
These IP addresses for the default gateway are
unavailable even when using the DHCP function.
Refer to the network administrator for the settings of
the DHCP server.
[HTTP port]
Assign the port numbers independently. 
The following...