Panasonic Wv Np244 Network Operating Instructions Manual

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future\
 use.
Network camera
Network Operating Instructions 
Model No.WV-NP244
LO CK
WV-NP244
(Lens is option.) 

2
CONTENTS
Preface ................................................................\
............................................................ 3
About these operating instructions  ........................................................................\
...... 3
Trademarks and registered trademarks  ...................................................................... 3
Monitor Images on a PC ........................................................................\
.......................... 4...

3
Preface
About these operating instructions
There are 2 sets of operating instructions for the WV-NP244 as follows.•Operating Instructions
• Network Operating Instructions
These network operating instructions contain descriptions of how to oper\
ate this product using a PC via a network
and of how to configure the settings. These network operating instructio\
ns also contain descriptions of how to dis-
play the SETUP menu on the video monitor connected to the VIDEO OUT conn\
ector of the camera and of...

4
Monitor Images on a PC
The following are descriptions of how to monitor images from the camera \
on a PC. 
Monitor images from a single camera
Notes:
•When ON is selected for User Authentication, the
authentication window will be displayed before dis-
playing live images for the user name and password
entries. The default user name and password are as
follows. 
User Name: admin
Password: 12345
To enhance the security, change the password for
the user admin. It is recommended to change this
password...

5
About the Live page
q[Live] button
Click this button to display the Live page. Refer to
page 7 for descriptions of how to operate the Live
page. 
w[Setup] button (*1)
Click this button to display the setup menu. 
eMulti-screen buttons
Click the desired multi-screen (1-4 or 5-8) button to
display images on a multi-screen. 
rImage type buttons
Click the desired button to change the image type to
be displayed. The selected button will turn green. 
tImage capture size buttons
The selected button will turn...

6
!1Audio button
Click this button to turn on/off audio. 
!2One shot button
Click this button to take a picture (a still picture). The
picture will be displayed on a newly opened window. 
!3Time and date
Current time will be displayed in the set date/time
display format. (
☞page 19)
!4Main area
Images from the camera will be displayed in this
area. 
*1: Operable by only users whose access level is 1. Administrator 
*2: Operable by only users whose access level is 1. Administrator or 2. Camera control...

7
Operation
Available operations when live images are displayed
*1: Operable by only users whose access level is 1. Administrator 
*2: Operable by only users whose access level is 1. Administrator or 2. C\
amera control when ON is selected for
User authentication (
☞page 35). 
Refer to page 35 for further information about the access level. 
Display the setup menu
(*1)
Display images on a multi-
screen
Display MPEG-4 image
Display JPEG image 
Change the image capture
size
Zoom in/out of image (*2)
Change...

8
Operation Description
Acknowledge alarm occur-
rences (*2)
Turn on/off audio
Display a still picture (one
shot)This button will be displayed and will blink when an alarm
occurred. When the button is clicked, the button will disappear
and the alarm output connector will be reset. (
☞page 30)
When this button is clicked, the button will turn into the 
button and audio will not be heard. 
When this button is clicked, a new window will open and the
still picture (one shot) displayed on the Live page will...

9
Monitor images from multiple cameras
Images from multiple cameras can be displayed on a multi-screen. Images \
from up to 4 cameras can be displayed
simultaneously. To display images on a multi-screen, it is necessary to \
register cameras in advance. 4 cameras can
be registered as a group and up to 2 groups (8 cameras) can be registe\
red. (
☞page 27)
Important:
•Select OFF for both the user authentication and the host authenticatio\
n of the camera to be registered. 
(
☞pages 35 and 36)
• Only JPEG...

10
Action at an Alarm Occurrence
The alarm action will be performed when the following alarm occur. 
Alarm type
Terminal alarm:When connecting an alarm device such as a sensor to the alarm connector \
on the rear of the
camera, the alarm action will be performed when the connected alarm devi\
ce activated. 
VMD alarm:When a motion is detected in the set VMD area, the alarm action will be \
performed. 
* VMD stands for Video Motion Detection. 
Command alarm:When received a Panasonic alarm protocol from...