Panasonic Wireless Speaker System Sc-ne3 Owners Manual

11
VQT4U49
ENGLISH
The first time “D.CONNECT” is set to “ON”, a 
password for this unit’s wireless network is 
randomly created and memorized in this unit.
≥This password is memorized until it is changed.
1 While “D.CONNECT” is set to “ON”: Press [SETUP] repeatedly to select 
“D.CONNECT”.
2Press [3,4] to select “ON” and then press [OK].
3 The current password is displayed.≥The 5 digits after “PW” is the password for 
this network.
4 Press any button to exit.
1 While “D.CONNECT” is set to “OFF”: 
Press...

12
VQT4U49
Bluetooth® operations
By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this 
unit wirelessly.
≥ Refer to the operating instructions of the Bluetooth
® device for details.
Preparation
≥ Turn on the Bluetooth
® feature of the device and 
place the device near this unit.
≥ If this unit is already connected to a Bluetooth
® 
device, disconnect it.
1Press [ , AUX] to select “BLUETOOTH”.≥ If “PAIRING” is indicated on the display, go to step 3....

13
VQT4U49
ENGLISH
Sound adjustment
The following sound effects can be added to the 
audio output.
1Press [SOUND] repeatedly to select the effect.
2Press [3,4] to select the setting and then 
press [OK].
≥ You may experience a reduction in sound quality when these 
effects are used with some sources. If this occurs, turn the 
sound effects off.
Others
The sleep timer can turn the unit off after a set time.
1Press [SETUP] to select “SLEEP”.
2Press [ 3,4] to set the time (in minutes) and 
then press [OK]....

14
VQT4U49
Occasionally, Panasonic may release updated 
software for this unit that may add or improve the 
way a feature operates. These updates are 
available free of charge.
Preparation
≥Turn the unit on.
≥ Connect this unit to the wireless network. ( l7)
– Make sure that the wireless network is  connected to the Internet.
– If “D.CONNECT” is set to “ON”, change the  setting to “OFF” and connect this unit to a 
wireless network that is connected to the 
Internet.
1Press [SETUP] repeatedly to select...

15
VQT4U49
ENGLISH
Troubleshooting
Before requesting service, make the following 
checks. If you are in doubt about some of the check 
points, or if the solutions indicated in the following 
guide do not solve the problem, refer to “Customer 
Services Directory (United States and Puerto Rico)” 
on page 21 if you reside in the U.S.A. or Puerto 
Rico, or refer to “Limited Warranty (ONLY FOR 
CANADA)” on page 22 if you reside in Canada.
Do you have the latest software installed?≥ Occasionally, Panasonic may...

16
VQT4U49
Pairing cannot be done.≥Check the Bluetooth® device condition.
The device cannot be connected.≥The pairing of the device was unsuccessful or the registration 
has been replaced. Try pairing the device again.
≥ This unit might be connected to a different device. 
Disconnect the other device and try pairing the device again.
The device is connected but audio cannot be 
heard through this unit.
≥For some built-in Bluetooth® devices, you have to set the 
audio output to “SC-NE3” manually. Read the...

17
VQT4U49
ENGLISH
Attaching the unit to a wall (optional)
This unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the screw used 
and the wall are strong enough to support the weight of at least 33 kg (72.8 lbs).
The screws and other items are not supplied as the type and size will vary with each installation.
≥ Refer to step 2 of “Wall mount instructions” for details about the required screws.
≥ Be sure to attach the fall prevention cord as a secondary safety measure....

18
VQT4U49
2Attach the wall mount bracket to the wall with 
2 screws (not supplied). (Both sides)
≥Use a level to ensure both wall mount brackets are 
level.
3Fix the safety holder onto the unit with the 
screw (supplied).
{.Screw tightening torque: 50 N 0cm (0.4 lbf0ft) to 
70 N 0cm (0.5 lbf0ft).
4Attach the fall prevention cord (not supplied) to 
this unit.
5Hook the unit securely onto the wall mount 
brackets with both hands.
≥Connect the AC power supply cord to the unit before 
hanging the unit onto...

19
VQT4U49
ENGLISH
Specifications
∫GENERAL
* Prospective communication distance
Measurement environment: 
Temperature 25 oC (77
oF) / Height 1 m (3.3 ft) 
Measure in “MODE 1”
	≥ Specifications are subject to change without notice.
Mass and dimensions are approximate.
≥
Total harmonic distortion is measured by a digital spectrum analyzer.
Licenses
Power consumption 14 W
Power consumption in standby mode
Approx. 0.1 W
Power consumption in standby mode
(With “NET STNBY” set to “ON”) Approx. 4.0 W
Power...

20
VQT4U49
Conexiones
∫Para seleccionar el nivel de entrada de 
sonido del dispositivo externo
1 Mientras está en modalidad “AUX”, pulse 
[PLAY MENU] repetidamente para seleccionar 
“INPUT LEVEL” y luego pulse [OK].
2 Presione [ 3,4 ] para seleccionar “NORMAL” o 
“HIGH”.
Operaciones Bluetooth®
Al usar la conexión Bluetooth®, puede escuchar el 
sonido desde el dispositivo de audio Bluetooth® desde 
este aparato, de forma inalámbrica.
≥ Consulte las instrucciones de funcionamiento del 
dispositivo...