Panasonic Wireless Speaker System Sc-ne3 Owners Manual

							VQT4U49
until 
2013/03/01
ENGLISH
ESPAÑOL
Owner’s Manual
Wireless Speaker System
Model No. SC-NE3
Thank you for purchasing this product.
Please read these instructions carefully before usi ng this product, and save this manual for future 
use.
If you have any  questions, contact:
U.S.A. and Puerto Rico: 1-800-211-PANA (7262)
Canada: 1-800-561-5505
Register online at www.panasonic.com/register
 (U.S. customers only)
Included Installation Instructions ( l2, 3 and 17, 18)
The installation work should be done by a qualified installation specialist.
Before commencing work, carefully read these  installation instructions and the operating 
instructions to ensure that installation is performed correctly.
(Please keep these instructions. You may need them when maintaining or moving this unit.)
La referencia rápida en español se puede encontrar en la página 20.
 
PPC
SC-NE3_PPC~VQT4U49.book  1 ページ  ２０１３年１月２８日　月曜日　午後４時２９分 
						

							2
VQT4U49
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety 
instructions listed below. Keep these operating instructions handy for future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in  accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, 
heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or  grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding-type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched 
particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus.
11 Only use attachments/accessories specified by the  manufacturer.
12 Use only with the cart, stand, tripod,  bracket, or table specified by the 
manufacturer, or sold with the 
apparatus. When a cart is used, use 
caution when moving the cart/apparatus 
combination to avoid injury from 
tip-over.
13 Unplug this apparatus during lightning storms or when 
unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing 
is required when the apparatus has been damaged in any 
way, such as power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.
Unit≥To reduce the risk of fire, electric shock or product damage,
– Do not expose this unit to rain, moisture, dripping or 
splashing.
– Do not place objects filled with liquids, such as vases, on 
this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to 
qualified service personnel.
AC power supply cord≥The power plug is the disconnecting device. 
Install this unit so that the power plug can be unplugged from 
the socket outlet immediately.
Button-type battery (Lithium battery)≥Risk of fire, explosion and burns. Do not disassemble, heat 
above  60oC (140oF) or incinerate.
Unit≥Do not place sources of naked flames, such as lighted 
candles, on this unit.
Placement≥To reduce the risk of fire, electric shock or product damage,
– Do not install or place this unit in a bookcase, built-in 
cabinet or in another confined space. Ensure this unit is 
well ventilated.
– Do not obstruct this unit’s ventilation openings with  newspapers, tablecloths, curtains, and similar items.
Button-type battery (Lithium battery)≥Danger of explosion if battery is incorrectly replaced. 
Replace only with the type recommended by the 
manufacturer.
≥ Keep out of reach of children.
≥ Insert with poles aligned.
≥ Mishandling of batteries can cause electrolyte leakage and 
may cause a fire.
– Remove batteries if you do not intend to use the remote 
control for a long period of time. Store in a cool, dark 
place.
– Do not heat or expose to flame.
– Do not leave the battery(ies) in a car exposed to direct  sunlight for a long period of time with doors and windows 
closed.
– Do not touch the terminals ( i and j) with metal objects.
– Do not recharge, disassemble, remodel, heat or throw into fire.≥When disposing the batteries, please contact your local 
authorities or dealer and ask for the correct method of 
disposal.
WARNING
DO NOT INGEST BATTERY, 
CHEMICAL BURN HAZARD
This product contains a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause severe 
internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the 
battery compartment does not close securely, stop using 
the product and keep it away from children.
If you think batteries might have been swallowed or placed 
inside any part of the body, seek immediate medical attention.
If any electrolyte should come into contact with your hands 
or clothes, wash it off thoroughly with water.
If any electrolyte should come into contact with your eyes, 
never rub the eyes. Rinse eyes thoroughly with water, and 
then consult a doctor.

This product contains a CR Coin Cell Lithium Battery which 
contains Perchlorate Material s special handling may apply.See www.dtsc.ca.gov/hazardouswaste/perchlorate.
CAUTION
SC-NE3_PPC~VQT4U49.book  2 ページ  ２０１３年１月２８日　月曜日　午後４時２９分 
						

							3
VQT4U49
ENGLISH
-If you see this symbol-
Table of contents
IMPORTANT SAFETY INSTRUCTIONS ............ 2
Accessories ....................................................... 4
Unit care ............................................................. 4
About Bluetooth
®.............................................. 4
Control reference guide.................................... 5
Connections ...................................................... 6
Network settings ............................................... 7
Using AirPlay with this unit’s speakers ........ 10
Playing back music files on  the DLNA server ........................................... 11
Bluetooth
® operations .................................... 12
Sound adjustment ........................................... 13
Others............................................................... 13
Troubleshooting .............................................. 15
Attaching the unit to a wall (optional) ........... 17
Specifications .................................................. 19
Licenses ........................................................... 19
Spanish Quick Reference /  Referencia rápida en español ..................... 20
Limited Warranty (ONLY FOR U.S.A. AND  PUERTO RICO) ............................................. 21
Limited Warranty (ONLY FOR CANADA)....... 22
Product Identification Marking is located on the bottom of 
the unit.
Android
TM, Google PlayTM, Google ChromeTM browser are 
trademarks or registered trademarks of Google Inc.
Information on Disposal in other Countries 
outside the European Union
This symbol is only valid in the 
European Union.
If you wish to discard this 
product, please cont act your local 
authorities or dealer and ask for 
the correct method of disposal.
The lightning flash with arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to the 
presence of uninsulated “dangerous voltage” within 
the product’s enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock to persons.
CAUTION
CAUTION :TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in 
the literature accompanying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
About descriptions in this Owner’s Manual
≥Pages to be referred to are indicated as “l ±±”.≥Unless otherwise indicated, operations are 
described using the remote control.
SC-NE3_PPC~VQT4U49.book  3 ページ  ２０１３年１月２８日　月曜日　午後４時２９分 
						

							4
VQT4U49
Accessories
Unit care
Pull out the AC power plug from the outlet before 
maintenance.
∫Clean this unit with a soft, dry cloth
≥When dirt is heavy, wring a cloth moistened in 
water tightly to wipe the dirt, and then wipe it with 
a dry cloth.
≥ Never use alcohol, paint thinner or benzine to 
clean this unit.
≥ Before using chemically treated cloth, carefully 
read the instructions that came with the cloth.
∫ To dispose or transfer this unit
The unit may keep the user settings information in 
the unit. If you discard this unit either by disposal or 
transfer, then follow the procedure to return all the 
settings to the factory presets to delete the user 
settings. 
(l15, “To return all settings to the factory preset”)
≥ The operation history may be recorded in the 
memory of this unit.
About Bluetooth®
∫ Frequency band used
≥This unit uses the 2.4 GHz frequency band.
∫ Certification of this device
≥This system conforms to frequency restrictions 
and has received certification based on 
frequency laws. Thus, a wireless permit is not 
necessary.
≥ The actions below are punishable by law in some 
countries:
– Taking apart or modifying the unit.
– Removing specification indications.
∫ Restrictions of use
≥Wireless transmission and/or usage with all 
Bluetooth® equipped devices is not guaranteed.
≥ All devices must conform to standards set by 
Bluetooth SIG, Inc.
≥ Depending on the specifications and settings of a 
device, it can fail to connect or some operations 
can be different.
≥ This system supports Bluetooth
® security 
features. But depending on the operating 
environment and/or settings, this security is 
possibly not sufficient. Transmit data wirelessly to 
this system with caution.
≥ This system cannot transmit data to a Bluetooth
® 
device.
∫ Range of use
≥Use this device at a maximum range of 10 m 
(33 ft). The range can decrease depending on 
the environment, obstacles or interference.
∫ Interference from other devices
≥This unit may not function properly and troubles 
such as noise and sound jumps may arise due to 
radio wave interference if this unit is located too 
close to other Bluetooth
® devices or the devices 
that use the 2.4 GHz band.
≥ This unit may not function properly if radio waves 
from a nearby broadcasting station, etc. is too 
strong.
∫ Intended usage
≥This unit is for normal, general use only.
≥ Do not use this system near an equipment or in 
an environment that is sensitive to radio 
frequency interference (example: airports, 
hospitals, laboratories, etc).
Check the supplied accessories before using this 
unit.
∏
1 Remote control (with a battery)
(N2QAYC000091)
∏ 1 AC power supply cord
(K2CB2CB00022)
Wall mounting accessories
∏ 1 Screw
(XTB3+8JFJK-J)
∏ 1 Safety holder
(RGQ0660-K)
∏ 2 Wall mount brackets
(RMQX1082-S)
(ONLY FOR CANADA)
The enclosed Canadian French label sheet corresponds to the 
English display on the top of the unit.
	≥ Do not use AC power supply cord with other equipment.
≥ Product numbers provided in this Owner’s Manual are 
correct as of February 2013. These may be subject to 
change.
Panasonic bears no responsibility for data 
and/or information that is compromised 
during a wireless transmission.
SC-NE3_PPC~VQT4U49.book  4 ページ  ２０１３年１月２８日　月曜日　午後４時２９分 
						

							5
VQT4U49
ENGLISH
Control reference guide
1 Standby/on switch [Í/I] ([ Í])Press to switch the unit from on to standby mode or vice 
versa.
In standby mode, the unit is still consuming a small amount 
of power.
2 Enter sound menu
3 Enter setup menu
4 Select Bluetooth
®/AUX
5 Adjust the volume (0 (min) to 50 (max))
6 Enter the Bluetooth
® menu/
Change the sound input level of the external 
device ( l6)/
Select the playback mode for AirPlay ( l11)
7 Mute the sound
Mutes the sound. Press again to cancel.
“MUTE” is also canceled when the volume is adjusted or the 
unit is turned off.
8 Selection/OK9 WPS pairing button ( l8)10 Display
11 Remote control signal sensor
Distance: Within approx. 7 m (23 ft) directly in front.
≥To avoid interference, please do not put any objects in 
front of signal sensor.
12 Wi-Fi® status indicator
∫ Before using for the first time
Remove the insulation sheet  A.
∫To replace a button-type battery
Battery type: CR2025 (Lithium battery)
12
≥Set the button-type battery with its ( i) mark 
facing upward.
≥ Keep the button-type battery out of reach of 
children to prevent swallowing.
µ VOLUME ´
1
4 9 5
10 11
12
Top view
SOUND
SETUPPLAY MENU
OK 
1
4
2
5
6
7
8
3
SC-NE3_PPC~VQT4U49.book  5 ページ  ２０１３年１月２８日　月曜日　午後４時２９分 
						

							6
VQT4U49
Connections
	≥These speakers do not have magnetic shielding. Do not place them near a television, personal computer or other devices easily 
influenced by magnetism.
≥ When this unit is turned on for the first time after purchase, a message prompting you to connect a Bluetooth
® device 
(“PAIRING”) is displayed. ( l12)
∫ To select the sound input level of the external device
1 While in “AUX” mode, press [PLAY MENU] repeatedly to select “INPUT LEVEL” and then press [OK].
2 Press [ 3,4] to select “NORMAL” or “HIGH”.
≥ The default setting is “NORMAL”.
	≥Switch the equalizer off or turn the volume of the external device down to reduce the input signal. High level of input signal  will 
distort the sound.
≥ For details, refer to the instruction manual of the other equipment.
≥ The cables and the devices are not supplied.
Additional Connection
0â0ä0Á0ê0ï
Connect the AC power supply cord.
To a household AC outlet
AC Power supply cord (supplied)
This unit consumes a small amount of AC power (
l19) even when turned off.
≥In the interest of power conservation, if you will not be using this unit for an extended period of 
time, unplug it from the household AC outlet.
0â0ä0Á0ê0ï
Connect an external music device (for AUX mode).
1 Plug the audio cable (not supplied) into the AUX jack.
Plug type:  ‰3.5 mm (1/8q) stereo
2 Press [ , AUX] to select “AUX” and start playback on 
the connected device.
Audio cable (not supplied)
SC-NE3_PPC~VQT4U49.book  6 ページ  ２０１３年１月２８日　月曜日　午後４時２９分 
						

							7
VQT4U49
ENGLISH
Network settings
You can wirelessly stream music from an iOS 
device (iPhone, iPod, iPad), an Android device or a 
Mac/PC to this unit’s speakers by using the AirPlay 
or DLNA feature.
To use these features, this unit must join the same 
2.4 GHz wireless network as the AirPlay 
compatible device or the DLNA compatible device.
≥ It is also possible to use AirPlay without a wireless network 
router. ( l10, “Directly streaming to this unit (AirPlay)”)
∫ Compatible AirPlay devices
(as of February 2013)
Preparation
≥Place this unit close to the wireless network 
router.
1Turn this unit on.
2Follow the chart below to choose the network 
setting method.
≥ If you want to apply the advanced setting, 
or you want to perform wireless setting with 
your Mac/PC, try “Method 3” on page 8.
	≥ To cancel this setting in the middle, press [ Í] to turn off the 
unit.
≥ Simultaneous use with other 2.4 GHz devices, such as 
microwaves, cordless telephones, etc., may result in 
connection interruptions.
≥ For up to date compatibility information on your wireless 
network router refer to 
http://panasonic.jp/support/global/cs/
(This site is in English only.)
iOS 4.3.3 or later
iPod touch
3rd, 4th, and 5th generation
iPhone 5 / iPhone 4S / iPhone 4 / iPhone 3GS
iPad  (3rd, and 4th generation)  / iPad 2 / iPad
iPad mini
iTunes 10.2.2 or later (Mac / PC)
Does your wireless network router  support WPS?
Yes
l 8,
“Method 1”
l8,
“Method 2” l
8,
“Method 3”
No / Do not know
Yes N o
Are you using an iPod touch/iPhone/iPad, 
or an Android device?
SC-NE3_PPC~VQT4U49.book  7 ページ  ２０１３年１月２８日　月曜日　午後４時２９分 
						

							8
VQT4U49
∫Using the WPS Push Button 
Configuration (PBC)
1Press and hold  [– WPS] on the unit.{.“WPS” flashes on the display. 
(The Wi-Fi status indicator blinks blue.)
≥ Complete step 2 within 2 mins.
2After “WPS” is indicated, press the WPS button 
on the wireless network router.
3The unit’s settings are completed when 
“SUCCESS ” is displayed and the Wi-Fi status 
indicator  stops blinking  and lights in blue .
4Press [OK] on the remote control to exit the setting.
	≥To use the WPS PIN code, refer to the notes on page 9.
You can make the wireless network settings with the app, 
“Panasonic Stereo System Network Setup” (for free).
If you’re using an Android device, download the app 
at the Google Play Store. If you’re using an iPod 
touch/iPhone/iPad, download it at the App Store.
Preparation
≥Connect your smartphone to your home wireless 
network.
≥
Check the password for your home wireless network.
1Press [SETUP] on the remote control repeatedly 
to select “NET SETUP” and then press [OK].{. “SETTING” is indicated on the display. 
(The Wi-Fi status indicator blinks purple.)
2Star t “Panasonic Stereo System Network Setup” 
on your smartphone and follow the indications.
∫ Note for the iOS version
After step 2
1 Enter the password for the home wireless 
network to which the iOS device is connected.
2 When a message instructing you to connect the  iOS device to this unit is displayed, press the 
home button to close the app.
3 On the Wi-Fi network selection screen in  “Settings”, select “00 Setup _ _ _ _ _ _”.
≥“ _ ” stands for a digit that is unique to each set.
4 When a message indicating the completion of the 
connection to this unit is displayed, restart the app.
5 When a message indicating the completion of the  Wi-Fi setup of this unit is displayed, close the 
app, and then check the operation of AirPlay, etc. 
	
≥“Panasonic Stereo System Network Setup” for Mac OS is 
also available at the App Store.
With this method, you will access this unit’s 
wireless network settings from the Internet browser 
of your compatible device.
≥
The following explanations are based on an iPhone.
1Press [SETUP] on the remote control repeatedly 
to select “NET SETUP” and then press [OK].{. “SETTING” is indicated on the display. 
(The Wi-Fi status indicator blinks purple.)
2After “SETTING” is indicated, connect your 
compatible device to this unit’s wireless 
network named “ 00 Setup _ _ _ _ _ _ ”.
≥“ _ ” stands for a digit that is unique to each set.
≥ Make sure that DHCP is enabled for the network setting 
on your compatible device.
Method 1
If your wireless network  router supports WPS 
(Wi-Fi Protected SetupTM).
The WPS identifier mark
WPS Push Button 
Configuration (PBC) 
compatible wireless network 
router may have this mark.
“FAIL” may be displayed if the connection was not 
made within the set time limit. Try the setting 
again. If “FAIL” is still di splayed, try other methods.
Method 2
Setting the network connection with the 
smartphone app.
Method 3
Setting the network connection from an Internet browser.
SC-NE3_PPC~VQT4U49.book  8 ページ  ２０１３年１月２８日　月曜日　午後４時２９分 
						

							9
VQT4U49
ENGLISH
3Start the Internet browser on your compatible 
device and type “http://192.168.1.12/”  into the 
URL address field and display the page.
{. This unit’s setup window is displayed.≥Examples of Internet browsers
iOS device/Mac : Safari
Android device : Google Chrome browser
PC : Windows Internet Explorer
4Select “ Search wireless network ”.
5Select and input the details.
≥Check your  home wireless network name  
(Network name (SSID)) and  password for 
this network. This can often be found on the 
wireless network router itself.
6Select “ JOIN” to apply the settings.≥In the pop-up screen, select “OK” to continue.
– Select “Cancel” to return to the setup window.
7The unit’s settings are completed when 
“SUCCESS ” is displayed and the Wi-Fi status 
indicator  stops blinking  and lights in blue .
8Make sure to connect your compatible device 
back to your home wireless network .
*1: If you have set your wireless network to be invisible, select 
“BACK” and refer to “Alternative settings”. ≥
The below settings are the alternative or additional settings 
for “Method 3”. (l 8)
	≥Enable Java and Cookies in your browser settings.
≥ This unit can also be set using the WPS PIN code.
Replace step 2 of “Method 1” with the following steps.
(Before starting, refer to the wireless network router’s 
operating instructions for details on how to enter the PIN 
code.)
1 While “WPS” is flashing press and hold [– WPS] again 
to display the 8 digit PIN code.
{.Wi-Fi status indicator blinks purple.
2 Enter the PIN code into the wireless network router.
[1] Select your home wireless network 
name .*1
[2]Type the password .
If “FAIL” is displayed press [OK], check the 
wireless network password and other settings 
and start again from step 1.
Advanced network settings
Alternative settings
Instead of steps 4 and 5
Select “Manual settings ”.
1 Type your  home wireless network name 
into the “Network name (SSID)” field.
2 Select the encryption method  from the 
“Security system” drop down list.
3 Type the  password into the “Password” field 
and then select “JOIN”.
Additional settings
If your home wireless network has been 
configured to use specific  IP Addresses, Subnet 
Mask, Default Gateway, Primary DNS, etc.
Before step 6
Select “Advanced network settings ”.
{.Input the required addresses into each field and select 
“JOIN”.
≥ To change the settings back to DHCP, select “ON” from the 
“DHCP” drop down list.
If you want to change the name of this unit that is 
displayed as the AirPlay speakers or DLNA 
renderer.
Before step 4
Select “Additional settings ”.
1 Select “ Edit STEREO SYSTEM name ”.
2 Type a new name into the 
“STEREO SYSTEM name” field.
{.Only ASCII characters can be used.
3 Select “ OK”.
4 If this unit is already connected to your home  wireless network:
jSelect “ Additional settings” and then 
select “ Exit”.
If this unit is not connected to your home 
wireless network:
j Continue to  step 4 of “Method 3”.
SC-NE3_PPC~VQT4U49.book  9 ページ  ２０１３年１月２８日　月曜日　午後４時２９分 
						

							10
VQT4U49
Using AirPlay with this unit’s speakers
1Turn the unit on.
≥Check that the Wi-Fi status indicator  lights in 
blue .
≥ If it doesn’t light in blue, check the wireless 
network settings. ( l7)
2iOS device: Start the “ Music” (or iPod) app.
Mac/PC: Start “ iTunes”.
≥If the Music app on your iOS device is used, select the 
audio file you want to play.
3Select “Panasonic NE3 _ _ _ _ _ _”*1, 2 from the 
AirPlay  icon.
{. Check the volume settings before starting the playback. 
(When AirPlay is used for the first time, the volume may 
be output at the maximum setting.)
4Start play.≥The playback will start with a slight delay.
	≥This unit can be set to turn on automatically when this unit is 
selected as the output speakers. ( l13)
≥ Playback of other audio sources will stop and AirPlay output 
will have priority.
≥ Volume changes on the iOS device or iTunes will be applied 
to this unit. (Refer to the iTunes Help for the required settings 
in iTunes.)
≥ With some iOS and iTunes versions, it may not be possible 
to restart the AirPlay playback if the selector is changed 
(e.g., “AUX”) or the unit is turned off, during the AirPlay 
playback.
In this case, select a different device from the AirPlay icon of 
the Music App or iTunes and then re-select this unit as the 
output speakers.
≥ AirPlay will not work when playing back videos on iTunes.
*1: “ _ ” stands for a digit that is unique to each set.
*2: The name that is displayed for this unit can be changed  from the “Edit STEREO SYSTEM name” settings. 
(l9, “Advanced network settings”)
With this function set to “ON”, you can stream 
music from the iOS device or 
Mac / PC (iTunes 10.2.2 or later) to this unit without 
the need of a wireless network router.
≥Previous network settings will be deleted when 
this function is set to “ON”.
≥
The following explanations are based on an iPhone.
1Press [SETUP] repeatedly to select “D.CONNECT”.
2Press [3,4] to select “ON” and then press [OK].
3Press [ 3,4] to select “OK? YES” and then 
press [OK].
4Connect your iPhone to this unit’s wireless 
network named “NE3 _ _ _ _ _ _”*2.
5Enter the password that is indicated on this 
unit’s display.
6Once the iPhone is connected to this unit’s 
wireless network, the setup is competed.
7Continue to step 2 of “Using AirPlay with this 
unit’s speakers”.
	
≥ This setting is reset to “OFF” when other network settings are 
performed. ( l7)
≥ When “D.CONNECT” is set to “ON”, this unit will not be 
connected to the Internet. It is not possible to update the 
software or check the Wi-Fi signal strength.
≥ When AirPlay is not being used, disconnect the AirPlay 
compatible device from this network.
≥ When using a computer on this network, make sure that all 
the shared files are encrypted.
≥ This feature is only compatible with the “Open System” 
authentication method. It is not compatible with “Shared Key” 
authentication method.
*1: “ _ ” stands for a digit.
*2: “ _ ” stands for a digit that is unique to each set.
Preparation
≥ Complete the network settings. ( l7)
≥ Connect the iOS device or Mac/PC to the same 
home wireless network  as this unit.
NE3
e.g., iPhone iOS 6.0.1
NE3
e.g., iTunes 11.0
Directly streaming to this unit 
(AirPlay)
“PW _ _ _ _ _”*1 is displayed.
The 5 digits after “PW” is the password for this 
network.
SC-NE3_PPC~VQT4U49.book  10 ページ  ２０１３年１月２８日　月曜日　午後４時２９分