Panasonic Wireless PT-LB50NTE/PT-LB55NTE/PT-LB60NTE, PT-LB50NTU/PT-LB60NTU Instruction Manual

							
41

Useful Functions (cont.)
= Yes,  = No 
ÞOne shot and motion streaming are available when no live is done.You can operate them by the launcher, when no live is done and projection screen is 
set to be full screen display (the status when no index is displayed).
•   Sound can be output only in live mode. (See page 43)
[When using LB20NT/LB30NT]
Selective areatransmission
SecondarydisplaytransmissionShutterPointerNote
When connected to one projector
Live mode·
Multi live mode ···
One shot····Þ
Motion streaming mode····Þ
When connected to multiple projectors
Multiple Source Live Mode·
Multiple Source Multi Live Mode ••••Unavailable
One shot····Þ
Motion streaming mode••••Unavailable
[When using LB10NT]
Selective areatransmission
SecondarydisplaytransmissionShutterPointerNote
When connected to one projector
Live mode·
Multi live mode ···
One shot····Þ
Motion streaming mode••••Unavailable
When connected to multiple projectors
Multiple Source Live Mode·
Multiple Source Multi Live Mode ••••Unavailable
One shot····Þ
Motion streaming mode••••Unavailable 
						

							
42

You can make various settings related to Wireless Manager ME 3.0.
Setting options
Setting option window
Click [] on the 
launcher.
The “Option” window 
shown to the right 
appears.
1
Click the desired 
tab to be set.2
Click [OK].3
 Picture quality selection
Select the quality of the image transmitted from the computer to the projector .
 Live mode settings
• [Remove image when shutting down Live Mode]
   Check  this  box  to  clear  the  projection  screen  from  the  projector  when  live  mode 
ends.
• [Disable Screen Saver]
  This  disables  the  computer  screen  saver  function  while  Wireless  Manager  ME  3.0 
is operating. Check this box to disable screen saver operation during live mode.
Transmission
Selecting [High Definition] imposes the following limits on operation.
• During the motion streaming, operations are performed in the normal mode.
• When a movie is playing in the live mode, it may not be projected smoothly. 
						

							
43

• [Display sender’s name in Multi Live Mode]
   The characters (max. 8) which have been entered are displayed at the upper right 
of the transmitted screen.
  In  the  4-screen  and  16-screen  index  style  modes,  they  are  also  displayed  at  the 
bottom of each image.
  (Alphanumerics are not displayed when the check mark has been removed.)
  [No name] is set by default.
• [Produce audio along with video at live mode]
  You  can  set  this  when  you  want  to  output  audio  data  from  a  projector  while  in  live  mode.  However,  the  sound  in  the  motion  streaming  mode  does  not  reflect  this 
setting  but  it  is  determined  by  the  volume  level  which  was  adjusted  on  the  motion 
streaming window. (See page 38) 
  Also,  volume  setting  operated  from  the  launcher  or  “Open”  window  is  effective  only  for  wireless  connection.  When  finishing  Wireless  Manager  ME  3.0,  Widows’ 
volume setting becomes active.
  Sound can be output only in live mode.
Setting options (cont.)
You  can  set  shortcut  key  combinations  that  let  you  control  the  Wireless  Manager  ME 
3.0 functions by computer keyboard operations.
Key setting
In live mode and multi live mode, the shortcut key switches the mode without stopping 
live mode.
Select the mode or 
the function to be set 
for the shortcut key, 
and click it.
1
Select one from [Ctrl], 
[Alt], and [Shift].2
Select one alphabet to be used with the key chosen in 
step 2.3
 Click [Setting].
The shortcut key set in step 2-3 appears in the blank space.
If click [Clear], the shortcut settings are canceled.
4
[Use “Pause” key to stop/continue Live Mode] : Stops live mode and multi live mode.
[Use “PrintScreen” key to execute One Shot]  :  Transmits  the  entire  computer  screen 
one time. 
						

							
44

Setting options (cont.)
• If  the  [Make  an  automatic  connection]  box  is  checked  and  a  projector  is  registered as  a  destination  for  automatic  connection  when  Wireless  Manager  ME  3.0  is 
started,    “Select Access  Port”  window  does  not  appear  and  connection  is  performed 
automatically.
• When  [Setting]  is  clicked,  “Access  Log”  window  appears  and  you  can  select 
projector(s) for automatic connections.
  Up to 5 projectors may be displayed in the order of most recent connection history.
• When  it  is  desired  to  remove  a  projector  from  the  display  list,  select  it  and  press  the 
[DELETE] → [OK] button.
 Launcher size setting
You can select the launcher button size.
 Automatic connection setting
You  can  perform  automatic  settings  for  
newly connected projectors.
Other
The version information of Wireless Manager ME 3.0 is displayed when [] on the 
“Option” window is clicked.
Version information 
						

							
45

Network setting of the projector
When making a wireless connection between a computer and a projector with settings 
other  than  the  default  settings,  perform  the  procedure  below  to  display  the  wireless 
menu required when changing the initial settings.
Select [WIRELESS] with the [▲▼] buttons.
The wireless menu appears.2
EXIT
ENTERSELECT
PT-LB50NTE
LANGUAGE
OPTION
SECURITY
WIRELESS
POSITION
PICTURENETWORK
NAME CHANGE
INPUT PASSWORD
PASSWORD CHANGE
WEB CONTROL
STATUS
INITIALIZE1
ON
OFF
Press the [MENU] button on the projector.
The main menu appears.1
0- +0- +0- +
EXIT
ENTERSELECT
PT-LB50NTE
LANGUAGE
OPTION
SECURITY
WIRELESS
POSITION
PICTUREPICTURE MODE DYNAMIC
ST ANDARD
OFFON
CONTRAS
T
BRIGHTNESS
SHARPNESS
COLOR TEMPERA TUR
E
DA YLIGHT VIEW
AI
Displaying the Wireless Menu
Depending  on  the  signals  which  are  input  to  the  projector,  it  may  not  be  possible  to 
adjust some of the items and use some of the functions.
In  the  case  of  an  item  that  cannot  be  adjusted  or  a  function  that  cannot  be  used,  the 
corresponding on-screen item will not be displayed, and you will not be able to execute 
it even when you press the [ENTER] button. 
						

							
46

Network setting of the projector (cont.)
You can change the projector name on the network.
It makes easy to recognize projectors in “Select Access Port” window.
Select [NAME CHANGE] at the wireless menu and 
press the [ENTER] button.1
RETURN
ENTERSELECT
PT-LB50NTE
LANGUAGE
OPTION
SECURITY
WIRELESS
POSITION
PICTURENETWORKNAME CHANGEINPUT PASSWORD
PASSWORD CHANGEWEB CONTROLSTATUSINITIALIZE
USER1
ON
OFF
Enter the projector name 
using the [▲▼] buttons.2
After entering the projector 
name, select [OK] and click 
[ENTER].
To cancel the change, select [CANCEL] and 
press the [ENTER] button.
3
NAME CHANGE
A
RETURN
ENTERSELECT
B C D E F GH I J K L MNaObPcQdReSfTgUhViWjXkYlZm
LB50NT
n
1
o
2
p
3
q
4
r
5
s
6
t
7
u
8
v
9
w
0
x
SPACE
DELETE
OKCANCELy z
! " # $% & ’ *
+-//=?@^
_ `|~ ( )
< > [ ]
{ } ,.:;
Select [NETWORK] at the wireless menu.1
Select the number to be connected with the [] 
buttons.2
RETURN
ENTERSELECT
PT-LB50NTE
LANGUAGE
OPTION
SECURITY
WIRELESS
POSITION
PICTURENETWORK
NAME CHANGE
INPUT PASSWORD
PASSWORD CHANGE
WEB CONTROL
STATUS
INITIALIZEUSER1
ON
OFF
Changing the network number
Changing the projector name 
						

							
47

This setting is used to limit the users that can connect to the projector.
Select [INPUT PASSWORD] at the wireless menu.1
Select [ON] with the [] buttons.2
Select [PASSWORD CHANGE] at the wireless menu 
and press the [ENTER] button.3
RETURN
SELECT
PT-LB50NTE
LANGUAGE
OPTION
SECURITY
WIRELESS
POSITION
PICTURENETWORK
NAME CHANGE
INPUT PASSWORD
PASSWORD CHANGE
WEB CONTROL
STATUS
INITIALIZEUSER1
ON
OFF
RETURN
ENTERSELECT
PT-LB50NTE
LANGUAGE
OPTION
SECURITY
WIRELESS
POSITION
PICTURENETWORK
NAME CHANGE
INPUT PASSWORD
PASSWORD CHANGE
WEB CONTROL
ST ATUS
INITIALIZEUSER1
ON
ON
Enter the password using the 
[▲▼] buttons.4
After entering the password, 
select [OK] and click [ENTER].
To cancel the change, select [CANCEL] and 
press the [ENTER] button.
5
PASSWORD CHANGE
A
RETURN
ENTERSELECT
******
B C D E F GH I J K L MNaObPcQdReSfTgUhViWjXkYlZmn
1
o
2
p
3
q
4
r
5
s
6
t
7
u
8
v
9
w
0
x
SPACE
DELETE
OKCANCELy z
! " # $% & ’ *
+-//=?@^
_ `|~ ( )
< > [ ]
{ } , . :;
Network setting of the projector (cont.)
Password setting 
						

							
48

Select [STATUS] at the wireless menu and press the 
[ENTER] button.
Your current settings appear.
Verifying settings
RETURN
ENTERSELECT
PT-LB50NTE
LANGUAGE
OPTION
SECURITY
WIRELESS
POSITION
PICTURENETWORK
NAME CHANGE
INPUT PASSWORD
PASSWORD CHANGE
WEB CONTROL
STATUS
INITIALIZEUSER1
ON
ON
Network setting of the projector (cont.)
You can return the changed settings to the initial conditions.
Select [INITIALIZE] at the wireless menu and press the 
[ENTER] button.1
Select [OK] with the [] 
buttons and press the [ENTER] 
button.
2
RETURN
ENTERSELECT
PT-LB50NTE
LANGUAGE
OPTION
SECURITY
WIRELESS
POSITION
PICTURENETWORK
NAME CHANGE
INPUT PASSWORD
PASSWORD CHANGE
WEB CONTROL
ST ATUS
INITIALIZEUSER1
ON
ON
INITIALIZE
RETURN
ENTERSELECT
INITIALIZE
CANCELOK
Returning to the Initial Settings
You  will  be  prompted  to  enter  the  password  if  [ON]  has  been  selected  as  the  [INPUT 
PASSWORD] setting on the security menu. 
						

							
49

If  you  selected  one  of  [USER1]  to  [USER3]  for  [NETWORK]  in  the  wireless  menu, 
you  can  make  detailed  network  settings.  Confirm  to  your  system  administrator  before 
changing any settings.
Network setting of the projector (cont.)
[User] settings
 How to display IP address setting menu
Press [NETWORK]→[USER1]-[USER3]→[ENTER] on 
wireless menu.
DHCPÞ:
ON:   If  a  DHCP  server  exists  in  the  network  to  which  the  projector  is  connected, the IP address will automatically be acquired.
OFF:    If  a  DHCP  server  does  not  exist  in  the  network  to  which  the  projector  is  connected,  additionally  set  [IP  ADDRESS
Þ],  [SUBNETMASKÞ]  and 
[GATEWAYÞ].
Þ
“Glossary” (See page 61)
IP address settings
DETAILED SETUP
USER1 1/3
NAME CHANGE
DHCP
IP  ADDRESS
SUBNETMASK
GA TEW AY 255.255.255.     0
192.168.   10.    1
OFF
192.168.   10.100 USER1
NEXTCANCELCANCEL
SELECT 
						

							
50

Network setting of the projector (cont.)
Select [NEXT] on the IP address setting screen, then wireless setting menu appears.
Make  the  settings  related  to  the  wireless  LAN  connection  between  the  projector  and 
the network.
Wireless settings
DETAILED SETUP
NEXTCANCELRETURN
USER12/3
SSID
MODE
AUTHENTICA TIO
N
ENCR YPTION NONE
AD HO
COPEN
Panasonic Projector
CANCEL
ENTERSELECT
 MODE 
:  Select [AD HOC] or [INFRASTRUCTURE].
  AD HOCÞ  :   Connect  projector  and  computer  directly  without  access 
point.
  INFRASTRUCTUREÞ  :  Connect through access point.
 SSIDÞ  :   If  the  mode  is  [INFRASTRUCTURE],  enter  the  SSID 
registered  at  the  access  point.  If  the  mode  is  [AD  HOC], 
enter  the  same  character  string  as  that  of  SSID  set  on  the 
computer to be connected.
 AUTHENTICATION  :   Set  the  user  authentication  method  used  by  the  network  to 
be connected.
  OPEN  :   Select  when  making  a  connection  using  [AD  HOC],  or  when 
the access point authentication method is OpenSystemÞ.
  SHARED  :   Select  when  making  a  connection  using  [AD  HOC],  or  when 
the access point authentication method is Shared KeyÞ.
  WPA-PSKÞ  :   Select when the access point authentication method is WPA-
PSK.
Þ
“Glossary” (See page 62)