Panasonic Wireless PT-LB50NTE/PT-LB55NTE/PT-LB60NTE, PT-LB50NTU/PT-LB60NTU Instruction Manual

							
31

You can simultaneously project one computer’s screen on up to eight projectors.
Click [] of the launcher.
The “Select Access Port” window appears.
2
Press the [MULTI-LIVE SELECT] button on the remote 
control to turn the projection screen into a full 
screen display (the status when no index window is 
displayed).
If  you  press  the  [MULTI-LIVE  SELECT]  button  once  or  twice  when  index 
windows  are  displayed  on  the  projection  screen,  the  screen  will  switch  over  to 
a full screen display.
1
Select the network number of the desired projectors 
from [Network].
Projectors powered on in the chosen network group are listed.
4
Click [] of [Access Device].3
Select the desired projectors, and click [OK].
Selected projectors are displayed in pink.
If click again, selected items are canceled.
If click [OK], the connection with the projectors is established.
5
Various projection methods (cont.)
Multiple Source Live Mode 
						

							
32

Various projection methods (cont.)
Click [] on the launcher.
The projectors selected in step 5 will begin displaying.
7
Check the status indication on the launcher to make 
sure that transmission is possible (check that the 
green lamp is lit).
6
• Projectors in the same network are selectable.
•  When  one  of  the  selected  projectors  is  communicating  with  another  computer,  or  its projection  screen  is  not  set  to  full  screen  display,  the  images  are  projected  onto  the 
other selected projectors.
• The greater the number of projectors, the slower the transmission.
• Picture quality or other options can be set on the “Option” window by clicking [
] on 
the launcher.
• Sound cannot be output in the multiple source live mode.
 •  If  the  connection  error  occurs  during  projection,  the  message  ‘Stop  “Live  mode”’  will  appear, then restart projection by clicking launcher buttons.
 Quitting multiple source live mode
Click [] on the launcher again. 
						

							
33

Various projection methods (cont.)
Multiple Source Multi Live Mode
Connect  up  to  four  computers  to  each  of  up  to  eight  projectors,  and  project  in  each 
projector by the 4-screen multi style.
Click [] of the launcher.
The “Select Access Port” window appears.
2
Press the [MULTI-LIVE SELECT] 
button on the remote control 
to turn the projection screen 
into a full screen display (the 
status when no index window is 
displayed).
I f   y o u   p r e s s   t h e   [ M U LT I - L I V E   S E L E C T ] 
button once or twice when index windows  are 
displayed on the projection screen, the screen 
will switch over to a full screen display.
1
Select the desired projectors, 
and click [OK].
Selected projectors are displayed in pink.
If click again, selected items are canceled.
I f   c l i c k   [ O K ] ,   t h e   c o n n e c t i o n   w i t h   t h e 
projectors is established.
5
Select the network number of the desired projectors 
from [Network].
Projectors powered on in the chosen network group are listed.
4
Click [] of [Access Device].3
Check the status indication on the launcher to make 
sure that transmission is possible (check that the 
green lamp is lit).
6
Click [] on the launcher.
The window shown to the right appears.
7 
						

							
34

 Switching to a different position
Select and click a different projection position in step 8 above.
 Enlarged display
If [] is clicked with a computer, projector screens temporarily change to full screen 
display.  To  return  to  the  original  display,  click  [
]  with  the  computer  that  click  [] 
and select original projection positions with each computer.
 Secondary viewer function
If another computer enlarged the display, your screen is out of the projection screen 
and displayed in the secondary viewer on your computer. (See pages 36-37)
 Quitting multiple source multi live mode
Select and click the checked position in step 8 above.
• Projectors only in the same network are selectable.
•  If LB10NT/20NT/30NT or a projector whose projection screen is not set to full screen  display is included among the selected projectors, [
] will be grayed out, preventing 
the projector from being selected.
• The greater the number of projectors, the slower the transmission. 
• During  the  multiple  source  multi  live  mode,  operation  will  not  take  place  when  either 
you press the [MULTI-LIVE SELECT] button on the remote control of the projector, or 
select  [OPTION]  in  the  main  menu  of  the  projector  and  press  [DETAILED  SETUP], 
[INDEX WINDOW], and [ENTER].
•  Picture quality or other options can be set on the “Option” window by clicking [
] on 
the launcher.
 •  If  the  connection  error  occurs  during  projection,  the  message  ‘Stop  “Live  mode”’  will 
appear, then restart projection by clicking launcher buttons.
Various projection methods (cont.)
Select and click the projection position.
The  computer  image  is  transmitted  to  the  selected  quarter  of  the  projection 
screen.
8 
						

							
35

Useful Functions
By  using  the  selective  area  window,  you  can  specify  the  necessary  information  alone 
from the computer screen, and display it on the projection screen.
Check the status indication on the launcher to make 
sure that transmission is possible (check that the 
green lamp is lit).
3
Click [] on the launcher.
Selective area window (green) appears on 
computer screen.
1
Click [], [], or [] on the launcher.
The picture in the selective area window is projected.
4
Surround the desired part to be sent to the projector 
with the selective area window.
You  can  perform  operations  in  the  selective  area  window  with  the  same 
operation for moving or changing the window on the computer screen.
• If  clicking  [
],  the  selective  area  window  automatically  fit  the  inside 
window’s size.
• If clicking [
], the selective area window changes to its default size.
• If clicking [
], the selective area transmission function ends.
2
Selective area transmission
The  picture  inside  the  selective  area  window  is  displayed  as  big  as  possible  with 
keeping the original aspect ratio to be fit for the resolution of projection screen.
 Quitting selective area transmission
 Click [] on the launcher again, or click [] on the upper right of the selective 
area window. 
						

							
36

Useful Functions (cont.)
You  can  set  the  computer  screen  and  the  projector  screen  to  the  multi-monitor  mode, 
and  use  the  computer  screen  as  the  primary  monitor  and  the  projector  screen  as  the 
secondary monitor.
Click [] on the launcher.1
Click [] or [] on the launcher.
The secondary screen on the computer is projected.
3
Check the status indication on the launcher to make 
sure that transmission is possible (check that the 
green lamp is lit).
2
Secondary display transmission
•  Like  the  normal  multi-monitor  function,  you  can  change  the  relative  positions  of  the primary  monitor  (computer  screen)  and  the  secondary  monitor  (projector  screen)  by 
using [Display Properties] (right-click on the desktop of the computer screen).
•  It  is  impossible  to  send  images  to  the  secondary  monitor  by  the  selective  area 
transmission (See page 35).
•  The  one  shot  function  is  not  available  when  the  secondary  display  transmission  is 
activated.
•  If  the  computer  has  been  set  to  the  multi-monitor  mode,  the  monitor  for  the  display  switch-over  function  will  be  displayed  as  the  third  monitor  in  [Display  Properties]  of 
Windows.
 Quitting secondary display transmission
Click [] on the launcher again. 
						

							
37

Useful Functions (cont.)
A snapshot of the current computer screen is transmitted to the projector.
Click [] on the launcher.4
Check the status indication on the launcher to make 
sure that transmission is possible (check that the 
green lamp is lit).
3
One shot function
If  you  are  using  secondary  display  transmission  function 
and  projecting  a  secondary  monitor  screen  in  multiple 
source  multi  live  mode,  once  [
]  is  pressed  on  one  of 
the computers the full screen display from that computer 
will  override  all  the  rest  and  the  secondary  screens  of 
the  other  computers  no  longer  be  possible  to  verify  on 
the projector screen(s). 
I n   t h i s   c a s e ,   t h e   s e c o n d a r y   s c r e e n   t h a t   y o u   w e r e 
projecting  will  appear  on  your  desktop  as  a  secondary 
viewer in reduced form.
Also,  while  using  the  secondary  display  transmission  in  the  4-screen  index  style  and 
the 16-screen index style, the secondary viewer appears.
Secondary viewer
•  You can perform operations on the secondary monitor while observing the secondary  viewer  on  the  computer  screen,  however  an  image  will  not  appear  on  the  projection 
screen(s) until the projection screen(s) goes back to the original projection style.
•   When  the  projector  screen(s)  return  to  its  original  status,  the  contents  of  the  secondary  viewer  are  displayed  on  the  projection  screen(s),  and  the  secondary 
viewer is closed as well.
Cancel all live mode transmission.1
Press the [MULTI-LIVE SELECT] button on the remote 
control to turn the projection screen into a full screen 
display (the status when no index window is displayed).
If  you  press  the  [MULTI-LIVE  SELECT]  button  once  or  twice  when  index 
windows  are  displayed  on  the  projection  screen,  the  screen  will  switch  over  to 
a full screen display.
2
To  project  only  the  required  parts  of  the  computer  screen  as  still  images,  you  can  use 
the  one  shot  function  to  send  the  parts  which  you  have  selected  using  the  selective 
area transmission function. 
						

							
38

Check the status indication on the launcher to make 
sure that transmission is possible (check that the 
green lamp is lit).
3
Cancel all live mode transmission.1
Click [] on the launcher.
“Open” window appears.
4
Play
The movie will be displayed by the projector.
It will not be displayed on the computer screen.
Stop
Pause
Continuous play/ON-OFF
Use this to set continuous play to ON or OFF.
Exit motion streaming mode
The motion streaming mode is exited.Volume
This  enables  the  level  of  the  volume 
supplied to the projector to be adjusted.
Seek Bar
This  enables  jumping  to  the  desired 
place during movie play.
Seek  bar  does  not  move  during  movie 
play.
Transmit  moving  pictures  to  projection  screen. You  can  display  moving  images  more 
efficiently  than  in  the  case  when  displaying  the  Windows  Media  Player  screen  on  the 
projector.
Motion streaming mode
Useful Functions (cont.)
Press the [MULTI-LIVE SELECT] button on the remote 
control to turn the projection screen into a full 
screen display (the status when no index window is 
displayed).
If  you  press  the  [MULTI-LIVE  SELECT]  button  once  or  twice  when  index 
windows  are  displayed  on  the  projection  screen,  the  screen  will  switch  over  to 
a full screen display.
2 
						

							
39

Useful Functions (cont.)
Select a movie file and click [].
Transmit moving pictures to projection screen.
Adjust volume or other setting on “Open” window if required.
5
•   This  mode  cannot  be  used  while  any  other  computer  connected  over  the  wireless 
network to the projector in use is transmitting a snapshot.
• The  allowed  formats  are  those  accepted  by  Windows  Media  Player,  including  asf,  wmv,  avi  and  mpeg.  However,  contents  protected  by  DRM
Þ  cannot  be  projected  nor 
can such DVDs be played.
ÞDRM (Digital Rights Management):  Technology  for  protecting  the  copyrights  of 
digital data
•    
Some frames may be lost or the audio may be disrupted in some computing environments.
•   Moving picture is not displayed on the computer screen. 
						

							
40

Useful Functions (cont.)
Blanks the screen for a moment.
Click [] on the launcher.
The image is turned off.
When sound is output, the sound also goes out.
1
Click [] again.
The image comes back.
2
Shutter function
The shutter function is available only in live mode or in multiple source live mode.
Pointer function
You  can  change  the  shape  of  the  pointer  appearing  on  the  projection  screen  in  live 
mode or multiple source live mode to one that can be used for presentation purposes.
Click [] on the launcher.
 Quitting pointer function
Click [] on the launcher again.
 
Functions used with each projection method
[When using LB50NT/LB55NT/LB60NT]
Selective areatransmission
SecondarydisplaytransmissionShutterPointerNote
When 
connected to one projector
Live mode
Multi live mode ··
One shot···Þ
Motion streaming mode····Þ
When connected to multiple projectors
Multiple Source Live Mode
Multiple Source Multi Live Mode ··
One shot···Þ
Motion streaming mode••••Unavailable