Panasonic Video Monitor Wv Ld1500 Operating Instructions

11
CONNECTIONS
Connection Example
DC IN PC IN AUDIOIN OUT IN OUT IN OUT
S-VIDEO VIDEO-B VIDEO-A
AC adapter 
(supplied)Other video monitors
PC
Power cord 
(supplied)
Audio input Video input
S-video
output
Audio output Video output
PC output
 (VGA)
Digital disk recorder 

12
Camera Connection
Connect the video output connector of camera to the
VIDEO IN connector with a coaxial cable. 
Note:Make sure that the cable length between the camera
and monitor is as follows.
Connection with Two or More
Video Monitors
• Connect the VIDEO OUT connector of this monitor to
the video input connector of another monitor with a
coaxial cable.
• Connect the AUDIO OUT connector of this monitor to
the audio input connector of another monitor with an
audio cable.
Notes:
• Up to 10 monitors...

13
Before operation, check the connections between monitors
and external devices (cameras, digital disk recorders, etc.)
(Refer to p. 11.)
1. Press the power button. The monitor will be powered
on, and the power indicator will light up in green.
2. Press the INPUT SELECT button.
Every pressing this button can change input signals as
follows.
The signal name will be displayed on the upper right
corner of screen for 3 seconds.Notes: 
• When no input signal is supplied to the monitor, NO
SIGNAL will be...

14
AUDIO VOLUME CONTROL
VIDEO ADJUSTMENT AND SETUP
By pressing the + or – button during picture display, you can adjust the audio volume level. While the + or – button is pressed,
the volume level is displayed on the screen.
–:Audio volume level goes down.
+:Audio volume level goes up.
VIDEO ADJUST Menu
Setup of this monitor will be performed in the VIDEO
ADJUST menu.
Notes:
• The menu title display differs depending on the select-
ed input signal. Before adjustment, press the INPUT
SELECT button surely...

15
3 Move the cursor to the following setting items by pressing the Cor Dbutton. Then, adjust the levels by pressing the + or –
button.
Note:Value can be set differently for each input signal.
4. To reset the settings, move the cursor to NORMAL SETTINGS by pressing the Cor Dbutton. Then, press MENU button.
The setting items of input signal currently selected will be reset to the factory default.
5. To return to the top menu, move the cursor to EXIT by pressing the Cor Dbutton. Then, press the MENU...

16
Setting item4. Move the cursor to AUTO by pressing the Cor Dbutton. Then, press the MENU button.  The picture display position will
be adjusted automatically.
Manual adjustment
If picture display position is not properly adjusted, move the cursor to the desired setting item by pressing the Cor Dbut-
ton. Then, adjust the levels by pressing the + or – button.
5. To return to the top menu, move the cursor to EXIT by pressing the Cor Dbutton. Then, press the MENU button.
6. After returning to the top...

Language Setup
You can select the language for monitor display.
Note:If the power is shut down during setup, the setting
values will not be saved.
1. Press the MENU button. The top menu will be dis-
played.
2. Move the cursor to SETUP by pressing the Cor Dbut-
ton. Then, press the MENU button. The SETUP menu
will be displayed.
3. Move the cursor to LANGUAGE by pressing the Cor
Dbutton. Then, press the MENU button. The LAN-
GUAGE menu will be displayed.
4. Move the cursor to the desired language by...

18
TROUBLESHOOTING
Check the following before requesting repair.
If a trouble cannot be corrected even after checking and trying remedy, contact your dealer.
Check if the power plug is properly connected to the AC outlet.
Power is not turned on.
NO SIGNAL appears on the
screen, and no picture is dis-
played.
OUT OF RANGE appears on
the screen, and no picture is dis-
played.
Picture display position is not
proper while the PC input signal
is being selected.
The power cord insulation is
damaged.
The power...

19
SPECIFICATIONS
Video Monitor
Power Source: 12 V DC, 4.58 A (using the supplied AC adapter)
Power Consumption: WV-LD2000: 51 W (including the supplied AC adapter)
WV-LD1500: 43 W (including the supplied AC adapter)
Display Panel: WV-LD2000: 20 TFT LCD, Built-in dual CCFTs
WV-LD1500: 15 TFT LCD, Built-in dual CCFTs
Display Area: WV-LD2000: 408 mm (H) x 306 mm (V) {16 (H) x 12 (V)}
WV-LD1500: 305.28 mm (H) x 228.96 mm (V) {12 (H) x 9 (V)}
Resolution: 640 x 480 (VGA)
Aspect Ratio: 4 : 3
Brightness: 400...

20
AC Adapter
Power Source: 100 V AC to 240 V AC, 50/60 Hz
Output voltage: 12 V DC
Output current capacity: 4.58 A
Dimensions: 120 mm (W) x 60 mm (H) x 35 mm (D) {4-7/10 (W) x 2-2/5 (H) x 1-2/5 (D)} 
(excluding the DC cable)
Weight: 0.35 kg{0.77 lbs.}
Operating Instructions (This Document)  .......................... 1 pc.
AC Adapter (Cable length: 1.8 m {6})  ............................. 1 pc.
Power Cord (1.8 m {6}) .................................................... 1 pc.
Warranty Card...