Panasonic Video Monitor Wv Lc1710 Operating Instructions

Video Monitor
Operating Instructions
Model No.  WV-LC1710
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
ENGLISH
FRANÇAIS 

2
ENGLISH VERSION
The serial number of this product may be found on the rear 
of the unit.
You should note the serial number of this unit in the space 
provided and retain this book as a permanent record of 
your purchase to aid identifi cation in the event of theft.
Model No. WV-LC1710
Serial No. The lightning fl ash with arrowhead 
symbol, within an equilateral triangle, is 
intended to alert the user to the pres-
ence of uninsulated “dangerous voltage” 
within the product’s enclosure that may 
be of...

3
IMPORTANT SAFETY INSTRUCTIONS
  1) Read these instructions.
  2) Keep these instructions.
 
 3) Heed all warnings.
  4) Follow all instructions.
  5) Do not use this apparatus near water.
  6) Clean only with dry cloth. 
  7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce 
heat.
  9) Do not defeat the safety...

4
LIMITATION OF LIABILITY
THIS PUBLICATION IS PROVIDE “AS IS” WITHOUT WAR-
RANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, 
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRAN-
TIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICU-
LAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD 
PARTY’S RIGHT.THIS PUBLICATION COULD INCLUDE TECHNICAL INAC-
CURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE 
ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR 
THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE 
CORRESPONDING PRODUCT(S)....

5
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
LIMITATION OF LIABILITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DISCLAIMER OF WARRANTY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PREFACE . . . . . . . ....

6
 Built-in high resolution (SXGA) panel with high contrast ratio, wide view angle and true 8 bit full color.
 Component Video and analog RGB signal input for personal 
computer (PC).
 Automatically switchable NTSC and PAL system.
 PC display capacity which can support VGA (640 × 480)  ~  SXGA  (1280 × 1024) resolutions. Picture size and position can be auto-
matically adjusted.
 One audio input and output with built in maximum speaker out- put of 0.5 W.
Refer all work related to the installation of...

7
a Power Button (  )
Front View
d  Auto Button (AUTO)  This button is for auto tuning of picture size and position of PC 
input.
e Menu Button (MENU)  Pressing this button displays or removes display of Video 
Adjustment Menu.
Rear View
b Power Indicator
  Lights up when the POWER button of the monitor is turned 
on.
c Input Select Button (INPUT SELECT)  Pressing this button once, indicates the video input currently on 
use. 
  Pressing repeatedly changes the video input in the sequence 
shown below....

8
l Audio Output Connector (AUDIO OUT)  The audio input signal connected to the audio input connector 
is looped through this connector.
m  S-Video Input Connector (S-VIDEO IN)  This connector is used to input S-Video signal.
n  Video Input Connector (VIDEO IN)  This connector is used to input Composite Video signal.
o  Video Output Connector (VIDEO OUT)  The video input signal connected to the video input con-
nector is looped through to this connector and terminated 
automatically. 
Timing Data Chart...

9
 -  +
EIA Rack Mounting 
Screws
(M4×12)
Rack Mounting Screws
(procured locally)
Cautions:•  The installation described below should be made by qualified service personnel or system installers.
•  During installation, remove all connected cables and turn off the power of the monitor.
Removing Stand in the Monitor
Before installing this monitor on the wall or in the rack, the monitor stand shall be removed.
Mounting into the Rack
To install this monitor in rack, use the Rack Mount Bracket WQ-LM171...

10
Wall Mounting Screws 
(procured locally)VESA mounting holes 
(100 mm pitch)
VESA standard 100 mm pitch bracket 
(procured locally)
Mounting on the Wall
To install this monitor on the wall, use the VESA standard 100 mm pitch bracket (procured locally) and four screws (procured locally).
Cautions:•  Do not block the ventilation opening or slots on the cover to prevent from overheating.
•  When installing on places with vibration, fix securely the rear of the monitor by using reinforcement angle.
•  To...