Panasonic Ventilating Fan Fv 05vfl3 Installation Instructions

FV-05VFL3  
FV-08VFL3
FV-11VFL3INSTALLATION  INSTRUCTIONS
  
Ventilating Fan Contents
Description
Dimensions General Safety lnformation
Unpacking
Wiring Diagram
lnstallation    (Joist Mounting-  )
lnstallation    (Joist Mounting-   )
lnstallation    (   -Joist Mounting)
lnstallation     (Between Joist Mounting )
lnstallation    (Wooden Header )
lnstallation     (ln Existing Construction )
Maintenance   (Cleaning)
Maintenance     (Replacement of Lamp)
Practical Guide to lnstallation
Product Service2-3
4...

GENERAL SAFETY INFORMATION 
2To reduce the risk of fire, electric shock or injury to persons, observe\
 the following:
9. Do not use this fan with any solid-state speed control device. 2. Before servicing or cleaning unit, switch power off at service panel \
and lock the service 
    disconnecting means to prevent power from being switched on accident\
ally. When the service 
    disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, 
    to the service panel....

GENERAL SAFETY INFORMATION CONTINUED
3
11. USA only: This product has a fluorescent lamp that contains mercury. Disposal may be regulated in 
       your community  due to environmental considerations. For disposal\
 or recycling information, please 
       contact your local authorities or visit Panasonic website: http:/\
/www.panasonic.com/enveronmental 
       or call 1-888-769-0149. 1. Do not install this ventilating fan where interior room temperature m\
ay exceed 104  F (40  C).
2. Make sure that...

FV-05VFL3     FV-08VFL3     FV-11VFL3SUPPLIED ACCESSORIES
Part name Part name
Appearance Appearance
Quantity Quantity
Grille
 Suspension
   bracket    Suspension
   bracket  
 Suspension
  bracket  
  Screw
(ST4.2X8) 
  Screw
(ST4.2X12)  1
1
1
1
2
2
  Machine screw
        (M4X8) 
        Long screw
        (ST4.2X20) 
        32W
  Fluorescent
        lamp
        4W
 Night lamp
        Lighting unit 2
6
1
1
1UNPACKING
Unpack and carefully remove unit from carton.
Refer to the Supplied Accessories list...

FV-05VFL3
FV-08VFL3
FV-11VFL3 WIRING DIAGRAM
No. Part name
GrilleFan
Lighting unit
Junction box cover Adaptor
Fluorescent lamp DamperSuspension bracket Junction box Bracket cover
Night lamp 8
9
10
11
13
1
2
3
4 5
6
(For 16 inches on center joists, only use suspension bracket   , for 19.2 inches on center joists, only use 
suspension bracket     , lf more than 19.2 inches on center joists, use suspension bracket             ) FV-05VFL3
FV-08VFL3
FV-11VFL32  7/8 (73)1   (25) 1  3/4 (45)
1 (26)3  1/ 2...

lf spacing A on center joists is 24 inches, connect
suspension bracket 
   and    (C4 mark to C4 mark)
as shown below:
2 Screw   (ST4.2X8) Suspension bracket
Suspension bracket2. lnsert the suspension bracket into the fan body 
    and adaptor. (Select the suspension bracket as 
    shown below) Joists
Spacing A on center joists
24 inches  12 inches
16 inches
19.2 inches vertical joists lnsert Suspension bracket
Refer to Fig. 2-1
Refer to Fig. 2-2
Refer to Fig. 2-3
Refer to Fig. 2-4 INSTALLATION   (JOIST...

INSTALLATION   (JOIST MOUNTING-  ) CONTINUED3. Install the suspension bracket and the flange of fan 
    body to joists by using long screws(ST4.2X20). (If 
    spacing A between joists is 10 1/4~12 inches, install 
    the flange of fan body according to Fig. 3-2, others 
    according to Fig. 3-1 install the product.)
4. Install the suspension bracket to joists by using long
    screws (ST4.2X20) and secure it to the fan body by
    using screw    (ST4.2X12). (Fig.4)
5. Remove junction box cover and...

13 1/4~
15 1/ 2(336 ~394)
16 1/  2~ 18 3/  4(419 ~480)
21 1/  4~ 23 1/  2(540 ~597)
A INSTALLATION   (JOIST MOUNTING-  ) CONTINUED8. Finish ceiling work. Ceiling hole should be aligned
    with the edge of the flange. (Fig.6)
9. Insert the plug connector    and plug connector
    into the receptacle    and receptacle     respectively,
    and secure the lighting unit to the fan unit with 2
    screw     (ST4.2X16) and 1 machine screw (M4X8).
    (Fig.6)
10. Insert the fluorescent lamp and screw the...

Screw    (ST4.2X12) Plug connector ReceptacleINSTALLATION    (JOIST MOUNTING-   ) CONTINUED6. Secure the fan body to adaptor by using machine
    screw (M4X8) and plug connector to receptacle. 
    (Fig.10)
4. Insert the suspension bracket into fan body 
    (refering to step 2 of installation   , page 6).
5. Insert the fan body into joists. (Fig.9)
IMPORTANT:Make sure that adaptor claws are properly inserted
into body slots.
7. Secure the suspension bracket to joists by using
    long screws (ST4.2X20)...

Suspension bracket
[16 inches and 19.2 inches
horizontal joist]
Suspension bracket
[19.2 inches vertical joist] -Joist Screw
(ST4.2X12)
INSTALLATION     ( BETWEEN JOIST MOUNTING )  Suspension bracket
The suspension bracket     can comply with
different kinds of   -joist. INSTALLATION     (   - JOIST MOUNTING )  
C3
C1
C4
C2
1. Before installation, secure the fan body to adaptor by
    using machine screw (M4X8) (Fig.13). Secure the 
    lighting unit to fan body (refering to Fig.6 of page 8).
2. Connect...