Panasonic Ventilating Fan Fv 05vf1 Installation Instructions

							2-ScrewsClamp plate 
Ceiling joistFig. 21Fig. 19
2-square knock-out
Secure the fan body to the adaptor by using one thumb screw
as shown in Fig.21
Insert fan body into ceiling as shown in Fig.20.
Remove the 2 square knock-out carefully from surface
of the frame by screw driver ( Fig.19) .And remove the 
bracket cover on the other side of the frame body.
Replace with clamp plates(accessories) and secure the fan 
body on ceiling board with 2 screws from inside of the frame.
(Fig.22)
INSTALLATION III   (IN EXISTING CONSTRUCTION) CONTINUED
Hand driver
Fan body 
Adapter slots    Claws
Fig. 20
Ceiling
Body
Fan  body
Ceiling
Fig. 22 
						

							Grille Glove
Grille
Slot
Mounting
spring
CAUTION:
Disconnect power source before working on unit. Routine
maintenance must be done every year.
WARNING:
MAINTENANCEMAINTENANCE
 Mount the fan body with thumb screw (on the right side of 
 bottom of the adaptor) as shown in Fig.7 of page 7.
Fig. 24
Screw driver
Ceiling BlowerCeiling
Fan body
Fig. 23
Screw  
INSTALLATION III   (IN EXISTING CONSTRUCTION) CONTINUED
Connect plug connector  to receptacle.(Fig.8   of page 7.) 
 Secure blower to fan body  with screws that were loosen   
 before.(Fig.24)Insert the blower into the fan body.(Fig.23)
Insert mounting springs into slots as shown and mount grille to 
fan body.(Fig.11 of page 8.)
1.  Never use petrol, benzene, thinner or any other such 
     chemicals for cleaning the ventilating fan.
2.  Do not allow water to enter motor.
oO3.  Do not immerse resin parts in water over 60 C (140 F).
1.  Remove grille. (Squeeze mounting spring and pull down 
     carefully.) ( Fig.25)
2.  Wash and clean grille.(Use non-abrasive kitchen detergent,
     wipe dry with new cloth.) (Fig.26)
Fig. 25
Fig. 26 
						

							Fig. 28Fig. 27
Cleaner 
Warning Concerning Removal of Covers.
PRODUCT SERVICEPRODUCT SERVICE
MAINTENANCE  CONTINUEDMAINTENANCE  CONTINUED
3.  Remove dust and dirt on fan body using a vacuum cleaner.
     ( Fig.27)
4.  Using a cloth dampened with mild dish soap,remove
     any dirt from fan body. Wipe dry with new choth.( Fig.28 )
5.  Replace grille.
The unit should be serviced by qualiffied technicians only.No service information is provided for customers. Your product
is designed and manufactured to ensure a minimum of maintenance. However, should your unit ever require service, a 
nationwide system of factory service centers and AUTHORIZED INDEPENDENT SERVICE CENTERS is maintained to 
support your products warranty.
(In the U.S.A.,call 1-866-292-7292 to locate the Panasonic Authorized Service Center nearest you.) 
						

							PANASONIC CONSUMER ELECTRONICS COMPANY
One Panasonic Way, Secaucus, NJ, 07094
PANASONIC CANADA INC.
5770 Ambler Drive, Mississauga, ON L4W 2T3