Panasonic Ventilating Fan Fv 05vf1 Installation Instructions

INSTALLATION
INSTRUCTIONS
Ventilating Fan
FV-05VF1  FV-07VF1
FV-09VF1  FV-11VF1
READ AND SAVE THESE INSTRUCTIOINS.
Please 
read these 
instructions carefully before attempting 
to install,
operate or service the Panasonic Ventilating Fan. Failure to comply
with instructions could result in personal injury and/or property
damage. Please retain this booklet for future reference.
IIIII I
SpecificationsDimensions
Description
9-12
Maintenance   
Product Service12-13
13-148-9 6-84
4-54 32 2
Table of Contents...

FV-05VF1
FV-07VF1
FV-09VF1
FV-11VF1
2 81Thumb screw
Long screw
Quantity Appearance
Part name
Grille
Suspension
  bracket I
Suspension
  bracket II
Screw
Suspension
 bracket III
Clamp
 Plate
3 inch adaptor
connector(optional
part for FV-05VF1
and FV-07VF1)
1
1
4
1
2
1
These Panasonic ceiling mount ventilating fan models use a low noise sirocco fan driven by a capacitor motor.
The motor is designed to have an extended service life with reduced energy consumption.
It also incorporates a thermal-cutoff for...

Suspension plate IIJunction box cover Junction boxAdaptor
Grille
Part name Part name
330   (13)
 84 (3  5/16)
36
7 1
92
DIMENSIONS
177.4  (7)
265~385 (10 13/32~15  5/32)
FV-05VF1   
FV-07VF1
FV-09VF1   
FV-11VF1
300.6(1
1  27/32 )252.6 (9
15/16   )
79.2(3   1/8)
56.7 (2  1/4)
105(4   1/8)
94 (3 23/32)
73 (2 7/8)
4 5  
(  1   25/ 3 2 )
1 3 9 ( 5 1 5 / 3 2 )
48
(4 11/32)110
255.6 (10  1 / 16 )
148 (5  13/16)
12
5
11
10
Unit: mm(inches)
No.
No.
Body
Damper
1
2
3
4
5
67
8
9
10
11
12Connector
Suspension...

Adaptor
4.2 (9.2) 4.2 (9.2) 3.9 (8.6)
20.0
Hz
60V Air direction 
SPECIFICATIONSSPECIFICATIONS
GENERAL SAFETY INFORMATIONGENERAL SAFETY INFORMATION
UNPACKINGUNPACKING
Model No.
FV-05VF1
FV-07VF1
FV-09VF1
FV-11VF1Exhaust
120
(W)Power consumption
14.0
24.0
34.0
639
739
835
948
Speed
(RPM)Air deliver at
0.1 WG(CFM)
50
70
90
110
Weight
Kg(Ib.)
4.1 (9.0)
* At 0.0 Static pressure, (Pa)
Unpack and carefully remove unit from carton.
Refer to the Supplied Accessories list to verify that all parts are present.
o...

Floor
GENERAL SAFETY INFORMATION CONTINUEDGENERAL SAFETY INFORMATION CONTINUED
CAUTION:
     1.  For general ventilating use only. Do not use to exhaust
        hazardous or explosive materials and vapors.
     2. Not for use in cooking area. (Fig .B)
     3. This product must be properly grounded.
Do not install above or (Cooking area)
inside this area
o45o45
equipmentCooking
Fig. B
WARNING:
To reduce the risk of fire, electric shock or injury to persons, observe the following;
A. Use this unit only in...

B
3
Fig. 3 
Adaptor flange
Long screw
Fig. 1
4 Inch 
Adaptor 
Neutral
Green
Red M.C.
 Live
Power Supply
AC120V 60Hz
 Black
3 inch adaptor connector
Duct tape
Connection method for 3 inch adaptor connector
 IMPORTANT:
Remove the tape from damper and adaptor before
installation. As shown in Fig.1.
INSTALLATION I (JOIST MOUNTING)INSTALLATION I (JOIST MOUNTING)
1. Disconnect plug connector from receptacle before
    starting installation.
2. Remove adaptor from body and secure to ceiling joists
    using...

FanReceptacle 
Fig. 7Thumb screw
Fig. 
6
Ceiling joist
Claws
Adapter slots
Fan body
Adapter
Fig.5-5 Fig. 5-2 
Fan body
Fig. 5-1 
AdapterWhen mounting
body and blower
separately
9. Connect plug connector to receptacle.(Fig.8)
Make sure that body Claws are  property inserted into adaptor
slots.
  IMPORTANT:
INSTALLATION I (JOIST MOUNTING) CONTINUEDINSTALLATION I (JOIST MOUNTING) CONTINUED
6. Remove ceiling section. (Fig.4)
7. Insert fan body into ceiling. (Fig.6) 
8. Secure fan body to adaptor using two...

Fig.12
Fan body
Thumb screws
Ceiling
Mounting spring
Ceiling joistSuspension bracket II 
Suspension bracket III 
Suspension bracket II 4-Long screws 
Suspension bracket III
1.Before installation, secure fan body to adaptor using two
   thumb screws. (Fig.12)
INSTALLATION I  (JOIST MOUNTING) CONTINUEDINSTALLATION I  (JOIST MOUNTING) CONTINUED
10. Secure fan body to ceiling joists using long screws in horizontal
      direction with suspension bracket II and III.(Fig.9)
11. Secure suspension bracket II and...

 Live
Adaptor
mm (inches)
CAUTION:
Mount junction box cover carefully so that lead wires are not
pinched
INSTALLATION II  (WOODEN HEADER) CONTINUEDINSTALLATION II  (WOODEN HEADER) CONTINUED
2.  Install header between ceiling joists using nails or screws.
3.  Install the ventilating fan and secure with screws.(Fig.13 and Fig.14)
4.  Insert the circular duct to the adaptor.
     Remove the junction box cover and secure conduit to junction
     box knockout  hole  (7/8 inch) (Fig.14 )
5.  Refer to wiring...

Fig. 18
Ceiling
Adaptor
Long screws
Suspension bracket I
Fig. 17
Junction box cover
Conduit
Fig. 16
Ceiling joist
mm (inches)Ceiling
Suspension bracket I  
Secure adaptor to ceiling joists with 4 long screws inside 
of the ceiling as shown in Fig.18.
Wiring diagram
CAUTION:
Check area above planned installation location to be sure that:
1. Ensure that the square hole size in ceiling should be sufficient according to Fig.16
2. Duct work can be installed and that area is sufficient for proper ventilation....