Panasonic Va-824 Key Telephone System Installation And Programming Manual

2. METHOD OF PROGRAMMING 
l Method of programming 
All programming changes are made at 
Extension No. 10 and it is recommend- 
ed to use key telephone with a LCD 
display (VA-l 2022 or VA-12022-B). 
@ Press the ON/OFF button. The 
ON/ 
OFF indicator and MIC indicator 
lights up and a continuous tone is 
emitted. 
@ Press the p] p] p][o](The continuous 
tone will stop) and then press the dial 
keyrjiJm1 (X: mode numbers 1 to 7) 
mode 1: System setting 
mode 2: COL setting 
mode 3: Key telephone setting...

A 
I 
ON/OFF key 
I 
I x 000 (Set up for program mode) 
c Jj 
Input of mode No. 
4 ’ (Mode set) 
1 # key 
1, 
4 
T 
Programming for each mode 
YES 
Complete 
I ON/OFF key 
I + 
# key 
4 I 
Increment of 
program step No. 
I 
T 
7 
/ 
29 flowchart  

MODE I 
( System setting 
PBX outside dialing digit 
You can have access to an outside line through PBX. This feature is necessary when the system is connected to PBX. Set 
by specifying one digit from among dialing numbers 0 to 9 (PBX line access number ). 
Program 
mode 
Key Operation LCD indication 
Remarks 
Program 
step [ m @ m m 
Desired 
program 
mode 
Dial No. 
Storing 
command 
- 0 thru 9 can be programmed. 
Initial setting is 9. 
30  

Automatic pause MODE 
You can place a pause automatically after the first digit dialing number when having access to outside numbers through PBX. 
Set by specifying one digit from among dialing numbers 0 to 9 (PBX line access number ). 
Program 
mode 
Key Operation 
LCD indication 
Remarks 
Program 
step 
Desired 
program 
mode 
L 
End 
I 
ON/Off 
El 
-0 thru 9 can be programmed.  

Call duration display appear timing MODE I 
When making an outside call by a key telephone with an LCD display, you can set how many seconds after completion of 
dialing you want the conversation time to appear on the display. 
Key Operation 
LCD indication 
Remarks 
Program 
mode 
Program 
step 
Desired 
program 
mode 
After 15 set 
(Initial) 
. . . . . . . . . . . . . . . . 
or , 
After 30 set 
-1J cm3 ’ 
4 
cl03 
1 I 
t 
Storing 
command 
$ !ON/ :OFF cl I 
ON1 
OFF -Either 0 or 1 depending on the...

Flash time MODE I 
Program 
mode 
Key Operation 
LCD indication 
Remarks 
You can set the length of open time for an outside line with FLASH key and that of auto-flash time with REDIAL key function. 
When you wish to use the call waiting service, just press FLASH key. 
If the system is connected to the PBX line and you do not use the hold function of PBX system, set to 2 seconds. 
J 
Desired 
program 
mode 
0.6 set 
KJ 
0 
or . . . . . . . . . . . . . . . . . . . . . 
1 set ( 
..I...,.....,,,, 
2sec...

Pause time MODE I 
By pressing REDIAL key, a pause can be stored in the system speed memory and one-touch key. One pause is counted as one 
digit. This is used when you need to wait for a second dial tone when dialing an outside line. 
Key Operation 
LCD indication Remarks 
Program 
mode 
2sec 
(Initial) fzl 
0 
. . . . . . . . . . . . . . . . . . or . . . . . . . . . . . . . . . . . . . . . . 
3sec 
m 
1 
Desired 
program 
mode 
c 105 I i 
+ i 
Either 0 or 1 depending on the 
desired program mode....

System speed dial group A MODE I 
You can divide the system speed dial memory into two groups. The range of address numbers for group A is from 00 to XX. 
XX is the last address number of the range and the designation should be between 00 to 89. 
Program 
mode 
Key Operation 
LCD indication 
Remarks 
Desired 
program 
mode 
u 
4 
System speed 
Dial No. 
Storing 
command 
End 
I ON1 
OFF Initial setting is 89.  

MODE I 
System speed dial group B 
You can divide the system speed dial memory into two groups. The range of address numbers for group B is from YY to 89. YY is 
the first address number of the range and the designation should be between 00 and 89. 
Key Operation LCD 
Program 
mode 
indication Remarks 
Desired 
program 
mode 
. 
System speed 
Dial No. 
Program the first number of the 
f 
’  Storing 
command 
/ 
f 
End 
Initial setting is 00. 
36  

Long speech alarm MODE I 
When making an outside call, you can set SO that a short alarm tone sounds from the speaker every three minutes. 
Key Operation 
LCD indication 
Remarks 
Program 
mode 
r 
No alarm tone 
(Initial) 
, . . . . . . . . . . . . . . . . . or *................... 
Have alarm tone 
Desired 
program 
mode 
c 108 
d 
Either 0 or 1 depending on the 
desired program mode. 
f 
Storing 
command 
End 
37