Panasonic Va-824 Key Telephone System Installation And Programming Manual

., 
,, --  s - 
~ .- ‘,, 
_. .) 
! 
. . 
25 
26 
:.  

METHOD OF PROGRAMMING _.. 
Read the following paragraphs before proceeding to the actual programming instructions and procedures. 
These notes and procedures are intended to acclimate the programmer to the proper programmingsequencerequired prior to 
the actual programming. 
. 
Programming of initial set 
a Assure that the RAM switch is posi- 
tioned at “CLR” side. 
0 Set the power switch to the “ON” 
position. 
@ After about 5 seconds, assure that the 
DATA MONIT lamps is flashing. 
@ Change the RAM...

. Method of programming 
All programming changes are made at 
Extension No. 10 and it isrecommend- 
ccl to use key telephone with a LCD 
display (VA-l 2022 or VA-12022-B). 
0 Press the ON/OFF button. The ON/ 
OFF indicator and MIC indicator 
lights up and a continuous tone is 
emitted. 
@ Press the ~]~~~l~~~](The continuous 
tone will stop) and then press the dial 
keyr/(iq (X: mode numbers 1 to 7) 
mode 1: System setting 
mode 2: COL setting 
mode 3: Key telephone setting 
mode 4: Incoming call ringing...

rogramming flowchart 
- 
- 
r 
1 * 000 
I ,l 
I (Set up for program mode) 
(Mode set) 
7  

r 
,’ 
Names and phone numbers list 
00 118 136 54 
72 
I 
55 
173 I  01 19 37 
56 
174 
I 02 20 38 
03 21 39 
I 
58 176 
04 22 40 
05 23 41 
60 
178  06 24 42 
I 
61 179  07 25 43 
I 
62 180 
08 26 44 
63 
(81 
09 27 45 
I 
64 
I82  10 28 
-----------I- ----------------------- -~~ 
11 29 47 
67 
85 
I  13 31 49 
14 32 50 
15 33 51 
16 34 52 
17 
35 53 68 86 
69 87 
I 
70 88 
71 
89 
8  

PROGRAMMING TABLE -. 
The set contents of all programming features should be recorded and stored according to the following table. 
System setting 
Outside access 
number from PBX 
Amount of time 
ause time store 
speed dial group A 
speed dial group B 
0 1 2 3 4 5 6 7 8 9 
No alarm tone 
Have alarm tone 
Long speech alarm 
*1os-0 
*108-l 
9  

FEATURE 
I OPTION SELECTED 
I 
Automatic answering 
for incoming calls No auto answering Only handset auto answering 
Handset 8 ON/OFF key 
+109-o *109-1 
+109-z 
Ringing telephone 
for night time incom- 
ing calls Only night time ring set TEL will ring 
I COL ring set TEL will ring,too 
I 
+110-o +110-o 
I 
Hold recall No recall *111-o 
In the immediate After 30 set 
After 1 min 
Connection of 
door box Can not connect 
Can be connect 
Type of applicable 
sensors 
113-o 
Detect - close 
+113-1 
Detect -...

r 
6 
FEATURE OPTION SELECTED 
I 
Restriction release 
by specified dial 
code (1 + area) 
Restric$on release 
by specified dial 
code (1 + area) 
x 0113 
Restriction release 
by specified dial 
code (1 + area) 
+0114- 
Restriction release 
by specified dial 
code (1 + area) 1 0 11 1 2) 3 14 [ 576 17 18 19 1 Clear 
I I I I I I I I I I I I I I I I I I I I 
11  

6 
FEATURE 
I OPTION SELECTED 
I 
+3striction release 
my specified dial 
mode (1 + area) 
0 1 2 3 4 5 6 7 8 9 
?estriction release 
,y specified dial Clear 
H 
mode (1 + area) 
I OI’I 
Restriction release 
3y specified dial 0 1 2 3 4 5 6 7 8 9 
mode (1 + area) 
Restriction release 
I I I I 
I I 
I I 
by specified dial 
0 1121314~5161718l9 
code (1 + area) 
12  

COL setting 
2 
:oL 2 
Tel. No. : 
FEATURE 
OPTION SELECTED 
I 
I 
Dialing system for Tone 
Pulse 
t sutside calls *0201-o 
*0201-i 
Kind of outside line COL 
connected to the PBX 
system 
-0202-O 
*0202-1 
(COL or PBX) 
Specification for 
automatic connect- Not designated 
Designated 
ing to outside lines 
*0203-O 
*0203-l 
Tone dialing signal 80 m set 
240 m set 
duration 
*0204-O 
*0204-l 
Minimum pause for 80 m set 
160 msec 
tone dialing signal 
i 0205-O 
*0205-1 
2 
Tel. No. : 
OPTION 
SELECTED...