Panasonic Va-1232 Key Telephone System Installation And Programming Manual

sle 
MODEL 
VA-123210 
VA-30920 
VA-l 2020 
VA-1 2021 
VA-l 2022 
VA-120228 
VA-82430 
VA-82444 
VA-30940D 
VA-30941D 
VA-30942D 
VA-30965 
VA-30960 
VA-20861 
Panasonic Company 
Division of Matsushita Electric 
Corporation of America 
One Panasonic Way, Secaucus, New Jersey 07094 
Panasonic Hawaii, Inc. 
99.659 lwaiwa Street P.O. Box 774 
Honolulu Hawaii 96808-0774  

Thank you for purchasing the Panasonic Easa-Phone VA-1232, Key Telephone System. 
This system can connect eight central office lines and twenty four key telephones and DSS, door box, external paging amp and 
external music source can be added. 
Please read this manual carefully before the installation of this system. 
Please follow the installation procedure described below. 
Before connecting telephone lines, inform to telephone company of the following. 
COLl COL7 
Telephone numbers COL2 
COL8 
COL3...

............. le for initial set ...... 7 
............ 
Priority 
..................................... 152 
........................ 
ications ......... 154 
......................... 
ing ............. 
............... 
.............. 
Ut ....................... 
setting ................. 
~~~u~a~i~~ ............... 
ialing ................... 
.................... 
tion .................. 
ing ....................... 
....................... 
line.. .................. 
e line s@i~~~i~~ ..........

Install the key service unit (KSU) on the wall according to the following procedure. 
@ Slide the two hooks securing the KSU cover and the key service unit in the arrow direction, then remove the cover. 
@ Place template against wall and install the four wood screws. Use the wood screw installation jig provided inside the 
key service unit when installing the wood screws. 
‘Z. 
@ Install the key service unit by hooking the four installation holes at the bottom of the key service unit to the four wood...

Install the key telephone on the wall according to the following procedure. 
@ Pull handset guide, turn it upside 
down, then insert it into its position. 
@ Push the hooks at two places, then 
remove the adapter. 
@ Turn the adapter upside down, insert 
the guides into two adapter mounting 
holes provided at the lower portion of 
the key telephone, then push in the 
adapter. 
@ Place the mounting holes of the 
bracket over the studs of the modular 
jack and pull the phone downward to 
secure in place....

Make connections between the KSU, Key TEL and the central office/PBX line (CO/PBX) according to the following procedure. 
Connect COL No. 1 through No. 8 
jacks provided inside the KSU to the 
CO/PBX line, respectively. 
onnect EXT No. IO through No. 33 
is desirable to use an LCD 
display type key telephone (VA-1 2022 
43) that is used for the 
ING purpose described 
later. (see page 28.) 
a Push in the cables from the top of 
the cable guide. 
c$ Remove the clamp plate, insert 
the cords, then...

(a) If the key service unit and the exten- 
sion are within 25 feet, use the cable 
supplied (7 feet, 15 feet or 25 feet). 
(See page 21) 
(b) Station cord and Handset cord 
Depending on the connection and 
length, 4 types of station cords and 2 
types of Mandset cords are available. 
(See page 21) 
(c) When the key service unit and the 
extension are apart by more than 200 
feet, please use quad cable. Quad 
cables assure proper operation over 
long distance than flat cables. 
In this case, use...