Panasonic Uf 9000 Operating Instructions Manual

Installing the LPR (Line Printer Remote) Monitor
31
Windows 98/Windows Me
Printer Section
NOTE1. To print data via LAN, the LPR Monitor must be installed on your PC.
13Th e M-LPR Port Monitor dialog box appears.
Type the IP Address of the machine in the Ho st 
na me or IP addres s window and the queue name 
(e.g. New105) in the Queue name: text box.
Click the   button. If an error occurs 
because the queue name had already been used for 
the same IP Address, select a different unique name 
such as...

Installing the LPR (Line Printer Remote) Monitor
32
Logon using an account with administrator rights.
Windows NT 4.0
1Click the Start button, select Settings, and click 
Con trol P anel.
The Con trol P anel window appears.
Double-click on the Network applet.
The Netwo rk dialog box appears.
2Click the Services tab.
Verify whether the LPR Service is already installed.
(Indicated by Microsoft TCP/IP Printing shown in 
the  N etw ork Service s l ist.)
If it is already installed, skip to Step 7. Otherwise...

Installing the LPR (Line Printer Remote) Monitor
33
Windows NT 4.0
Printer Section
4The Windows  NT Setup dialog box appears.
Insert the Windows NT 4.0 CD-ROM, and type 
D:\i386 (where D: is your CD-ROM drive).
Click the   button.
5After the files have been copied into the hard drive of 
your PC, the display returns to the Network dialog 
box. Confirm th at the  Microsoft TCP/IP Printing 
service has been added to Network Services list.
Click the   button.
Note:
If the OK button does not change into a...

Installing the LPR (Line Printer Remote) Monitor
34
Windows NT 4.0
8The following ste p reg isters the LPR Port for network 
printing.
Before proceeding, ensure that the printer is 
installed, connected to the network, turned ON and is 
operating properly.
Select th e Ports Tab and click the    
button.
9The Prin ter Ports dialog box appears.
Select LPR Port and click the   
button.
10The Add LPR compatible printer dialog box 
appears.
Enter the IP Address of the printer in the upper field, 
and lp for...

Installing the LPR (Line Printer Remote) Monitor
35
Windows NT 4.0
Printer Section
11The Printer Po rts dialog box appears.
Click the   button.
12Select the printer port and click the   
button.
The printer properties dialog box closes and yo u 
have now configured the printer as a network printer.
Close
OK 

Installing the LPR (Line Printer Remote) Monitor
36
Logon using an account with administrator rights.
Windows 2000/Windows XP/Windows Server 2003
1Open the Prin ters folder.
Right-click on the desired printer icon and 
select Propertie s from the pop-up menu.
The printer properties dialog box ap pears.
2Select the Ports Tab and click the  
 button.
Add Port... 

Installing the LPR (Line Printer Remote) Monitor
37
Windows 2000/Windows XP/Windows Server 2003
Printer Section
3Select Standard TCP/IP Port and click the 
 button.
4Click the   button.
5Enter the IP Address and the Port Name and 
click the   button.
Note:
The Port Name is automatically 
entered by Windows 2000Windows 
XP/Windows Server 2003. You may 
need to change it as required.
New Port ...
Next
Next
Continued on the next page... 

Installing the LPR (Line Printer Remote) Monitor
38
Windows 2000/Windows XP/Windows Server 2003
6Select Custom and click the   
button.
71. In the Protocol section, select LPR.
2. In the LPR Settings section, enter the 
Queue Name (e.g. LPR1) and select the 
L PR Byte Cou nting En able d.
3. Click the   button.
8Click the   button.
Settings...
OK
Next 

Installing the LPR (Line Printer Remote) Monitor
39
Windows 2000/Windows XP/Windows Server 2003
Printer Section
9Click the   button.
10Click the   button.
11Click the   button.
Click the   button.
The printer properties dialog box closes and 
you have now configured the printer as a 
network printer.
Finish
Close
Apply
OK 

40
Configuring the Printer Driver Settings
To change the printer settings, open the dialog box for the printer properties by performing the following
steps.
Windows 98/Windows Me
1
Click the Start button, select Se ttin gs, and then click
Printers.
2
Right-click on the desired printer icon in the Printers
folder, and select Properties in the pop-up menu.
The printe r properties dialog  box appears.