Panasonic Uf 9000 Operating Instructions Manual

Installing the Printer Driver
11
Printer Section
1Insert the Panasonic Document Management 
System CD-ROM.
2Click on the desired language.
Note:
If the CD-ROM does not launch 
automatically, double click the My 
Computer icon on the Desktop or on 
the Start menu, then double click the 
CD-ROM icon. 
3Click the   button.
4Click Prin ter Drive r.
5Note for Windows  98/Windows Me us ers :
If your computer does not have the LPR Port 
Monitor installed, please proceed to Installing 
the LPR Monitor on page 28...

Installing the Printer Driver
12
6Select Local Printer and click the 
 button.
Note:
If your machine has been installed on 
your network, click the   
button to find it. Then, select the 
machine from the list of network 
connected units, and click the 
 button.
7Select your machines model(s) check box 
and click the   button.
8Select how your machine will be used, either
as a Network Printer or as a USB Printer.
If USB Printer is selected, click the 
 button and skip to Step 13.
Note:
Make sure that the...

Installing the Printer Driver
13
Printer Section
10Click the   button  if you  wo uld like  
to change your current default printer to the 
one that you are installing.
Note:
This dialog box only appears if another 
printer is already installed.
11Select your new default printer from the New 
Printer List and click the   button.
12The re quired files are copied.
13a
When this message appears, turn the Power 
Switch of your machine ON and connect your
machine to an available USB Port on your 
computer....

Installing the Printer Driver
14
13b
Click the   button.
When this message appears, turn the Power 
Switch of your machine ON and connect your 
machine to an available USB Port on your 
computer.
Click the   button.
Yes
Yes 

Installing the Printer Driver
15
Printer Section
13c
Click the   button.
When this message appears, turn the Power 
Switch of your machine ON and connect your 
machine to an available USB Port on your 
computer.
Select In stall th e so ftware automatically  
and click the   button.
This message ma y appe ar if yo u have  a 
previous version of the printer driver installed.
Select the latest version of the ∗.inf file and 
click the   button.
Continue Anyway
Next
Next
Continued on the next page... 

Installing the Printer Driver
16
The Panaso nic/Panafax Printer Drive r have been installed , and the Panason ic/Panafax Printer icon(s) have
been added to the Printer folder.
If you are installing the Printer Driver for network printing, please contact your network administrator for the
IP Address of the machine and proceed to the next section to install the LPR Monitor service for the version
of Windows you are using after your computer has rebooted.
NOTE1. When installing on Windows NT 4.0, Windows...

Installing the Printer Driver
17
Printer Section
When using the USB cable to connect the printer, install the printer driver by following the steps below.
Connecting with a USB Cable (Windows 98)
1Connect the printer to the PC with an USB cable.
Turn the Power Switch of your machine ON.
2The New Hardware Found dialog box appears for 
a brief moment, followed by the Add New 
Hardware Wizard dialog box.
Click the   button.
3Select Search for the best driver for your 
device.
Click the   button.
4Insert the...

Installing the Printer Driver
18
Connecting with a USB Cable (Windows 98)
6Click the   button.
7Click the   button.
8The New Hardware Found dialog box appears for 
a brief moment, followed by the Ad d New 
Hardware Wizard dialog box.
Click the   button.
9Select Search for the best driver for your 
device.
Click the   button.
Next
Finish
Next
Next 

Installing the Printer Driver
19
Connecting with a USB Cable (Windows 98)
Printer Section
10Select Specify a location  and type 
D:\English\PanaDMS\Driver\Usb\Win9x (where 
D: is your CD-ROM drive).
Click the   button.
11Click the   button.
12Enter the Printer name and click the   
button.
13Click the   button.
END_USB_ 98
Next
Next
Finish
Finish 

Installing the Printer Driver
20
Connecting with a USB Cable (Windows Me)
1Connect the printer to the PC with an USB cable.
Turn the Power Switch of your machine ON.
2The New Hardware Found dialog box appears for 
a brief moment, followed by the Ad d New 
Hardware Wizard dialog box.
Select Spe cify the location of the driver.
 (Advanced).
Click the   button.
3Insert the CD-ROM included in your machine.
4Select Specify a location and type 
D:\English\Pa naDMS\Driver\Usb\UsbDrv\Win9x 
(where D:  is your...