Panasonic Uf 5950 Operating Instructions Manual

One-Touch/Abbreviated Dialing Numbers
31
Entering One-Touch/Abbreviated Dialing Numbers
Programming 
Your Machine
NOTE1. If you require a special access number to get an outside line, enter it first, and then press 
. A hyphen - is displayed for pause.
2. If you are using Pulse dialing, and you wish to change to Tone dialing in the middle of dialing, 
press 
 (represented by a /). The dialing method will change from Pulse to Tone 
after dialing the digit /. 
Ex : 9 PAUSE TONE 5551234
3. You can search...

One-Touch/Abbreviated Dialing Numbers
32
If you have to change, or erase any of the One-Touch/Abbreviated dialing numbers, follow the steps below.
NOTE1. If you make a mistake, use or  to move the cursor beyond the incorrect number, press 
 then re-enter the new number.
Editing One-Touch/Abbreviated Dialing Numbers
To change the settings of a One-Touch/ABBR dialing number
1
   
1:ONE-TOUCH
2:ABBR NO.
2Select  for One-Touch Dialing number
Select  for ABBR. Dialing Number
Ex:
ONE-TOUCH< >
PRESS ONE-TCH OR∨...

One-Touch/Abbreviated Dialing Numbers
33
Editing One-Touch/Abbreviated Dialing Numbers
Programming 
Your Machine
To erase the settings of One-Touch/ABBR Dialing number
1
   
1:ONE-TOUCH
2:ABBR NO.
2Select  for One-Touch Dialing number
Select  for ABBR. Dialing Number
Ex:
ONE-TOUCH< >
PRESS ONE-TCH OR∨ ∧
3
Enter the station you wish to erase.
Ex:
 SALES DEPT
9-555 1234
4
 SALES DEPT
ENTER TEL. NO.
5
To return to standby, press .
ONE-TOUCH< >
PRESS ONE-TCH OR∨ ∧
72
1
2
1
STOP 

One-Touch/Abbreviated Dialing Numbers
34
After programming a one-touch dialing number, you can print the directory sheet which includes the first 12 
characters of each station name.  Cut along the dotted line and place it over the One-Touch key under the 
Directory Sheet Cover.  To print a directory sheet, follow the steps below.
Printing Out a Directory Sheet
1
 
PRINT OUT (1-7)
ENTER NO. OR∨∧
2
 
Your machine prints out the directory sheet.
* PRINTING *
DIRECTORY SHEET
******************* -DIRECTORY...

35
Programming 
Your Machine
Customizing Your Machine
Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the 
Parameter Table, are preset for you
, and do not need to be changed. If you do want to make a change, read 
the table carefully. Some parameters, such as the Resolution and Contrast parameters, can be temporarily 
changed by simple key operation just before a transmission is made. When the transmission ends, 
however, these parameters return to their...

Customizing Your Machine
36
Fax Parameter Table
No.ParameterSetting 
NumberSettingComments
01CONTRAST*1NormalSetting the home position of the CONTRAST key.
2Lighter
3Darker
02RESOLUTION*1StandardSetting the home position for the RESOLUTION.
2Fine
3S-Fine
4Halftone
(Fine)
5Halftone
(S-Fine)
04STAMP
(HOME)
*1OffSetting the home position of the STAMP key.
To select the stamp function when document is stored in 
memory, see Fax Parameter No. 28.2On
05MEMORY
(HOME)
1OffSetting the home position for memory...

Customizing Your Machine
37
Fax Parameter Table
Programming 
Your Machine
18OP CALL TIMER*120 sec.Selecting the length of time that your machine signals 
(rings) for an incoming voice call in Fax/Tel Auto Switching 
mode. 
 (See page 64)230 sec.
340 sec.
450 sec.
19OGM LENGTH 
(TAM I/F)11 sec.Setting for the OGM length of your TAM from 1 to 60 
seconds. The machine will not start to detect SILENCE 
until the time setting has lapsed.
(Default = 20 sec.)
------
6060 sec.
20SILENT DETECTION 
(TAM...

Customizing Your Machine
38
Fax Parameter Table
34ENERGY SAVER 
MODE1OffTo reduce the power consumption in standby, select either 
Energy-Saver or Sleep mode and specify the Delay Time 
(1 to 120 minutes) for the machine to enter into the 
selected mode. 
The Delay Timer setting is only available in the Energy-
Saver or Sleep Modes.
Off: The unit will remain in standby mode 
and consume more energy than when in 
Energy-Saver or Sleep modes.
Energy-Saver: Saves energy by consuming less power 
than when in...

Customizing Your Machine
39
Fax Parameter Table
Programming 
Your Machine
NOTE1. Setting number marked with an asterisk (*) indicates the factory standard setting.
2. This parameter supports an optional telephone service Distinctive Ring Service provided by 
your local telephone company. It allows up to 4 different telephone numbers to be assigned on 
a single telephone line with a distinctive ring for each telephone number. By selecting the 
appropriate ring pattern associated with the telephone number...

40
Basic Operations
Loading Documents
In general, your machine will send any document printed on A4, Letter, or Legal size paper.
Note: The maximum document width that can be sent through the machine is 10.1 in (257mm). However, 
the effective scanning width is 8.3 in (212mm)
You must never try to send documents that are:
To transmit these kinds of documents, make a photocopy first, and then transmit the copy instead.
Documents You Can Send
Documents You Cannot Send
WetCovered with wet ink, or paste
Too...