Panasonic Uf 585 Userd Guide

29
Setting Your ID Number (Fax Telephone Number)
If the remote machine does not have a Character ID but it has an ID Number, when sending or receiving, your ID
Number will appear on the remote machines display and their ID Number will appear on your display.
We suggest you use your facsimile telephone number as your ID number. (max. 20 digits)
 (see Note 1)
 (see Note 2)
1
  
2
3
 repeatedly until display shows;
4
Enter your ID (max. 20 digits) by using the key pad and
.
Ex:
If you make a mistake, use...

30
This page is intentionally left blank. 

31
PROGRAMMING YOUR MACHINE
One-Touch/Abbreviated Dialing Numbers
Entering One-Touch/Abbreviated Dialing Numbers
One-Touch and Abbreviated Dialing are two fast ways of dialing full telephone numbers.  To use these dialing
methods, you must first store the telephone number using the following procedure.
To enter a One-Touch key, follow the steps below
1
  
2
  
3
4
Ex:
5
Enter the telephone number
(up to 36 digits including pauses and spaces).
Ex:
6
7
Enter the station name using character keys
(up to 15...

32
To set an Abbreviated Dialing Number, follow the steps below
 (see Note 1) (see Note 2) (see Note 3) (see Note 4)
1
  
2
     
3
4
Ex:  
 (001 to 072)
5
Enter the telephone number
(up to 36 digits including pauses and spaces).
Ex:
6
7
Enter the station name using character keys
(up to 15 characters).
Ex:
8
To record another number, repeat step 4 to 8.
To return to standby, press  .
1. If you require a special access number to get an outside line, enter it first and then press  .
A hyphen - is...

33
Changing or Erasing One-Touch/Abbreviated Dialing Numbers
If you have to change or erase any of the One-Touch/Abbreviated dialing numbers, follow the steps below.
To change the settings of a One-Touch/ABBR dialing number
 (see Note 1)
 (see Note 2)
1
        
2
Select   for One-Touch Dialing number
Select   for ABBR Dialing Number
Ex:
3
Enter the station you wish to change.
Ex:
4
then enter a new telephone number.  (See Note 1)
Ex:
5
6
then enter a new station name.  (See Note 1)
Ex:
7
To return to...

34
To erase the settings of One-Touch/ABBR Dialing number
 (see Note 1)
1
        
2
Select   for One-Touch Dialing number
Select   for ABBR Dialing Number
Ex:
3
Enter the station you wish to erase.
Ex:
4
5
To return to standby, press  .
1. If the One-Touch/Abbreviated dialing number has been used for a communication reservation, the settings cannot
be changed or erased until the communication has finished.
To change or erase the settings, cancel the communication first by Edit File Mode.  (See page 82)...

35
Printing Out a Directory Sheet
After programming a one-touch dialing number, you can print out the directory sheet which includes the first 12
characters of each station name.  Cut along the dotted line and place it over the One-Touch key under the
Directory Sheet Cover.  To print out a directory sheet, follow the steps below.
1
  
2
  
Your machine prints out the directory sheet.
******************* -DIRECTORY SHEET- ****************** DATE  MAR-12-1999 ***** TIME 15:00 *****
01 02 03
04 05 06
07 08...

36
Customizing Your Machine
Your facsimile machine has a variety of adjustable Fax Parameters.  These parameters, listed in the Parameter
Table, are preset for you and do not need to be changed.  If you do want to make a change, read the table carefully.
Some parameters, such as the Resolution, Contrast, and Verification Stamp parameters, can be temporarily
changed by simple key operation just before a transmission is made.  When the transmission ends, however, these
parameters return to their preset...

37
Fax Parameter Table
No. ParameterSetting
NumberSetting Comments
01 CONTRAST *1 Normal Setting the home position of the CONTRAST key.
2 Lighter
3 Darker
02 RESOLUTION *1 Standard Setting the home position of the RESOLUTION key.
2 Fine
3 S-Fine
04 STAMP
*1 OffSetting the home position of the STAMP key.
To select the stamp function when document is stored in memory,
see Fax Parameter No. 28. 2On
05 MEMORY 1 Off Setting the home position of the MEMORY key.
*2 On
06 DIALING METHOD 1 Pulse
Selecting the...

38
18 OPERATOR CALL TIMER
*1 20 sec.Selecting the length of time that your machine signals (rings) for an
incoming voice call in Fax/Tel Auto Switching mode. 
 (See page 64) 230 sec.
340 sec.
450 sec.
19 OGM LENGTH (TAM I/F)
1 1 sec. Setting for the OGM length of your TAM from 1 to 60 seconds.  The
machine will not start to detect SILENCE until the time setting has
lapsed.
(Default = 20 sec.) --- ---
60 60 sec.
20 SILENT DETECTION
(TAM I/F)1 InvalidSelecting the Silent Detection Mode.
*2 Valid
22...