Panasonic Tv Dvd Vcr Combination Pv Df2002 Operating Instructions

51
Advanced Operation
Ready Checklist
Unit is in TV-VCR mode, press .
Video CD or CD is inserted.
Program Repeat Play
(Video CD/CD)
d
Press SET to enter Select mode.
(“REPEAT OFF” will flash.)
ePress  to select “DISC
REPEAT.”
(Unit Information Screen) (Unit Information Screen)
aDo steps 1 through 6 on
b
Press DISPLAY to display
Disc Information screen.
(Disc Information Screen)
cPress DISPLAY again to
display Unit Information screen.
f
Press SET to set mode.
(“DISC REPEAT” stops
flashing.)
To cancel,...

52For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
PLAY
   PLAY   MODE : NORMAL
00 :  00  :  00                      MP3  MENU  ROOT                   . .               
  VAVA                       END_WALTZ
  TECHNO             DD_CUB I C
  POPS                  NOCTURNE 
  JAZZ                   NORN
 
1Press POWER  on the remote or DECK.
Press OPEN/CLOSE, 
and then place a MP3 disc into the disc tray.
Press OPEN/CLOSE  to close.
2
3
MP3 Playback...

53
Advanced Operation
1
Press DISPLAY in Play or Stop mode to
display “On-Screen Display.”
When DISPLAY is pressed, On-Screen Displays
show disc information (title/chapter/track number,
play, Play mode).
• Each press of DISPLAY changes the on-screen
DVD Operation using On-Screen Displays
Ready Checklist
Unit is in DVD mode, press DVD.
DISPLAY button does not function while DVD
TITLE MENU is displayed.
Note
3
1)Press  to select the setting.
2)Press SET to set.
To make corrections,
press  and SET...

54For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
DVD Operation using On-Screen Displays (continued)
Detailed Descriptions of Each On-Screen Display
1. TITLE No.
• Change the No. by pressing * or the number
keys, and press SET.
2. Chapter No.
• Change the No. by pressing  or the number
keys, and press SET.
3. Disc currently being played
4. Elapsed playing time
The screen may be changed by selecting the
elapsed time.
• Change the elapsed time by...

55
Advanced Operation
TITLEchapterchapter
chapter
CHAPTER REPEAT
TITLE REPEAT
NORMAL PLAY
CURRENT PLAYBACK POSITION
tracktrack
track
TRACK REPEAT
DISK REPEAT
NORMAL PLAY
CURRENT PLAYBACK POSITION
• CHAPTER/TITLE REPEAT PLAY (DVD)• TRACK/DISC REPEAT PLAY (Video CD/CD)
For your reference
a. Repeat Play
Detailed Descriptions of Each On-Screen Display
Unit information screen
•  Change the desired mode during play by pressing , and press SET.
  Video CD/CD    TRACK REPEAT        DISC REPEAT    REPEAT OFF...

56For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
1
1)Press * to select
“DVD LOCK.”
2)Press SET to set
“ON” or “OFF.”
DVD Lock Ratings (DVD only)
 “ ”   DVD Lock is activated.
  “OFF”   DVD Lock is deactivated.
LEVEL 1 : LOCK ALL:
Playback of all DVDs, CDs and Video CDs is
prohibited. (Use to prohibit play of mature theme
DVDs not encoded with rating level.)
LEVEL 2 : DVDs expressly for children can be played back.
LEVEL 3 to 7 :
DVDs for general...

57
For Your Information
DISC LANGUAGES (DVD only)
To select and set the language of the audio soundtrack,
subtitles, or title/DVD menus for all discs to be played.
“AUDIO” selectionsTo select the audio soundtrack language.
(factory preset: English)
English/Spanish/French
Original: Original disc language
OTHER : Other language selection*1
“SUBTITLE” selectionsTo select the subtitle language.
(Factory preset: AUTO)
AUTO:Same language selected for
“AUDIO”
•If language set for “AUDIO”
is used in playback,...

58For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
• Make settings according to amplifier connected
to optical audio output as shown in above table.
• When a dts decoder is not connected, to enjoy
dts DVD, please select audio output other than
dts at the dts DVD menu screen. Otherwise,
there will be no sound from the unit speakers.
*1 Audio output from unit is converted to 48 kHz/
16 bit in addition to audio from digital audio
output.
To enjoy high...

59
For Your Information
STILL MODE
1
1)Press  to select
“STILL MODE.”
2)Press SET
repeatedly for mode.
(See below)
2
Do steps 1 and 2 on pag   .
AUTO:“FIELD” (Field still) or “FRAME” (Frame still) is
automatically selected during the still mode.
(Factory preset)
FIELD:“FIELD” (Field still) is always selected.
This setting will reduce jitter when compared
with “AUTO” on some discs.
FRAME:“FRAME” (Frame still) is always selected.
Some texts and fine patterns will be seen clearly
when compared with “AUTO”...

60For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Before Requesting Service
Remote Control
Unit cannot be controlled...
ACTION, PLAY, SELECT, SET
POWER, etc. buttons cannot be
selected...
Correction
• Aim Remote directly at the remote sensor on the unit. (P. 10)
• Avoid any object blocking signal path.
• Inspect the remote batteries. (P. 4)
•
• Exposing unit remote sensor to direct fluorescent or outdoor
light may cause signal interference.
• Press...