Panasonic Tv Dvd Vcr Combination Pv Df2002 Operating Instructions

Location of Controls (continued)
Connections
11
Initial SetupRear View of the unit
AC Power Plug
WARNING:
Overtightening “Nut type” RF coaxial cables
may damage jacks. Finger tighten only.
For ANT./Cable
Connect the cable from
Antenna/Cable to the VHF/UHF
terminal on the unit.
For DSS/Cable Box
Connect the OUT jack on your
cable box to the VHF/UHF
terminal on the unit with a RF
cable.
When plugged into an AC outlet,
this unit consumes 3.5 W of
VHF/UHF Antenna
Input Terminal
Audio Output
Connector (L/R)...

12For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Connections (continued)
Amplifier
Unit
SpeakerSpeaker
AUDIO OUT
     R     L
R      L
AUDIO IN
Notes on audio output from the optical digital
audio output connector
Enjoying digital audio output from the
digital audio output connector
*1 The type of audio output from the connector can be
selected by the Settings for DVD Operation. (See
page 60.)
*2 Sound having 96 kHz sampling is converted into 48
kHz...

13
Initial Setup
Unit
Optical digital audio
cable (optional)
Decorder with Dolby Digital/
dts processing (optional)
Amplifier
Center speaker
Front
SpeakerFront
Speaker
Subwoofer
Surround
speakerSurround
speaker

 Unit ➔ Decoder with Dolby Digital ➔ Amplifier ➔ Speaker
or
dts (digital theater systems)
When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts bitstream
is output from the unit Optical digital audio output connector. When the unit is connected to a
Dolby Digital...

14For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Plug the unit power cord into an AC wall outlet.
 2 /  6 / 2002   WED 12 : 00PMDST : ON
A
UTO  CLOCK   SET
CO
MPLETED
SETT I NG : CH 1 0
        
Initial Setup (Ready to Play)
1
Press Power* on the remote or unit. The unit
2
Settings are made automatically.
When setup is done, this screen appears.
screen appears, set the clock using MANUAL
3
Press  Please make all cable or antenna connections before...

15
Initial SetupReset all unit Memory Functions
When moving unit to a new location, or if a
mistake was made in the Initial Setup section.
• Make sure a tape is not inserted in the unit.
Manual Clock Set
If AUTO CLOCK SET was incomplete, manually
set the clock as follows.
SET          :       SELECT  :            
END          :  ACT I ON  SET  
CLOCK
DST
 : ONSESELE CT    MONTH
1 /     /1 /     /:
1
2
Press ACTION on the Remote to
display SET CLOCK Menu screen.
Press 
  to select the month
manner,...

16For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Reset Language, Channels, Clock,
3)Press  to select
“MANUAL,” then
press SET.
(For Auto Clock Set,
select “AUTO CLOCK
SET,” and press SET.)
 
3) Press  to select
“ANTENNA,” then
press SET to set
your antenna system
 (“TV” or “CABLE”).
4) Press 
 to select
“AUTO SET,” then
press SET.
• After Channel Auto
• If clock is set manually,
clock Auto Set will not
be performed. Set is finished, Clock
Auto Set...

17
Initial Setup
  Time Zone Adjust
4)Press  and
press SET to select
and set the month,
date, year, time, and
DST 
(Daylight Saving
Time)
.
To Make Corrections,
repeatedly press  to move to error, then
correct.
5) Press ACTION
twice to 
start the
clock and exit this
mode.
3)Press 
 to select
“TIME ZONE
ADJUST” and
press 
 or  to
subtract or add
hour(s) as
necessary.
4)Press ACTION
twice to exit.
(Only when Auto Clock is set.)
Add or Delete a Channel
Time Zone Adjust
1)Press   to
select “CLOCK.”
2)Press...

18For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Record On a Tape
Playback a Tape
1
Insert a tape.
Press
2
• The unit power comes
on automatically.
To prevent tape jam,remove loose or peeling
labels from tapes.
Forward/Reverse scene search
Press FF/SLOW+ or REW/SLOW-.
Still (Freeze) picture
Press STILL/PAUSE.
Press PLAY to release.
Slow Motion picture
Press FF/SLOW+ (increases speed) or
REW/SLOW- (decreases speed) in
Still mode.
Press PLAY to...

19
Basic Operation
Copy Your Tapes (Dubbing)
•Unauthorized exchanging and/or
copying of copyrighted recordings
may be copyright infringement.
• Please note that some tapes
cannot be dubbed on this unit.
Also, it is not possible to dub
DVD/Video CD/CD to VHS tape
using this unit.
Playback (Source)
1
Recording (Editing) unit
Insert pre-
recorded tape.Insert blank tape
with record tab.
• Dubbing tapes protected
with Copy Guard will have
poor quality results.
2
3
4
5
Press PLAY then
PAUSE at starting
point...

20For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
5
Press   or
number key(s) (see
below) to select title
and press SET to
play.
Basic DVD Operation
Ready Checklist
All connections are made. (See page 11.)
Your unit is plugged in.
If unit is connected  to an audio amplifier,
turn the stereo system’s power on.1
Press POWER* on the remote or unit.
Press DVD to select DVD mode.
Insert a disc.
1)Press OPEN/CLOSE.
2) Place disc into disc tray.
2
3• If a...