Panasonic Tv Dvd Combination Pv 20df64 Operating Instructions

21
TV Operation
3 Press ▲▼ to select “TIME ZONE 
ADJUST” and press SET to subtract 
or add hour(s) as necessary.
4  Press ACTION twice to exit.
(Only when Auto Clock is set.)
1 Press ▲▼ ◄ ► to select “CLOCK.”
2 Press SET.
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
SET CLOCK
AUTO CLOCK SET
MANUAL
TIME ZONE ADJUST :+1
SELECT: SET:SET
END :ACTION
SET CLOCK
AUTO CLOCK SET
MANUAL
TIME ZONE ADJUST : 0
SELECT: SET:SET
END :ACTION
  Time Zone Adjust
2 Press ▲▼ ◄ ► to select “LANGUAGE.”
3...

22For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo

23
TV Operation
When selecting CABLE channels 100 to 125 
with the NUMBER keys, first press the 100 
key, and then enter the remaining two digits.
Press R-TUNE to display the last channel 
you were watching.
Press MUTE to instantly mute the sound. 
Press again to restore the previous sound 
level. Example 1:
To select channel 125, first press the 100 
key, then 2, then 5.
Example 2:
To select channel 12, first press the 1 key, 
then 2.
Example 3:
To select channel 2, first press the 0 key, 
then 2.
You...

24For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
The following are possible audio broadcast 
types and on-screen displays. The signal 
being received is indicated with a “ 
 ” mark 
while the selected audio mode is indicated 
with an arrow. To change the audio mode for 
these broadcasts, see the “Audio Mode for 
TV Viewing” section.
Press DISPLAY to display the broadcast 
signal being received.
MTS Stereo broadcast:
Multi-channel...

25
TV Operation
ON TIMER
10:00AM CH 05
CANCEL:ADD/DLT
SELECT: SET:SET
END :TIMER
SET TIMER
ON TIMER
SLEEP TIMER: 0
SELECT: SET:SET
END :TIMER
This unit can be set to automatically power on 
in one of 2 modes (TV or Disc.)
•  If no button on the remote or unit is pressed 
within 60 minutes after unit turns itself on, it will 
turn itself back off.
1  Press TIMER to display SET TIMER 
screen.
To Cancel ON-TIMER,
Repeat steps 1-3. Then, press ADD/DLT to 
clear the time in steps 4-5. Now, press 
TIMER to...

26For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
Closed Caption is ...
This multi-use system not only allows the 
hearing impaired to enjoy selected 
programs, but also allows one to watch 
programs with the volume muted.
1  Press ACTION to display MAIN 
MENU.
8  Press ACTION three times to return 
to the normal screen. 2 Press ▲▼ ◄ ► to select “TV.”4 Press ▲▼ to select “CAPTION”.
5  Press SET to display CAPTION 
screen.
6 Press...

27
TV Operation
Closed Caption narration, if available, is 
displayed when MUTE button is pressed for 
silence.
1  Press ACTION to display MAIN 
MENU.
•  When a disc supporting closed captions is used, 
the subtitle and the closed caption may overlap. 
In this case, turn the subtitle or caption mode off. 
(See page 42.)
2 Press ▲▼ ◄ ► to select “TV.”
3  Press SET to display SET UP TV 
screen.
10 Press ACTION three times to return 
to the normal screen.
11 Press MUTE to mute the sound and 
display closed...

28For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
1  Do steps 1 - 5 at left.
2 Press ▲▼ to 
select “AUDIO 
MENU.”
3  Press SET to 
select desired 
mode.
4  Press ACTION three times to end 
setup.
•  The effects of this feature on the signal are not 
output to the Audio/ Video Output Connector.
•  When AUDIO MENU mode is “AUTO,” the 
AUDIO ADJUST setting will be “STANDARD.”
•  AUDIO MENU settings remain in memory.
•  VIDEO MENU...

29
TV Operation
Press ACTION to display MAIN MENU.
1 Press ▲▼ ◄ ► to 
select “TV.”
2  Press SET to 
display SET UP 
TV screen.
3 Press ▲▼ to 
select “SET UP 
VIDEO/AUDIO.”
4  Press SET to 
display.
5 Press ▲▼ to 
select “VIDEO 
ADJUST.”
6  Press SET to 
display.
7 Press ▲▼ to 
select an item.
8 Press ◄► to 
adjust.
To Reset VIDEO Controls.
Press ▲▼ and SET to select and set 
“STANDARD.” All controls return to their 
factory settings.
9  Press ACTION four times to end 
setup.
COLOR ControlAdjust color...

30For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
When “ON” is selected, the picture is 
displayed even when a broadcast signal is 
weak or non-existent.
ON:
Picture is displayed regardless of signal 
condition, and may not always be clearly 
visible.
OFF:
Screen turns solid blue when signal is 
absent or weak.
1  Press ACTION to display MAIN 
MENU.
2 Press ▲▼ ◄ ► to select “CH.”
3  Press SET to display SET UP 
CHANNEL screen.
6...