Panasonic Tv Dvd Combination Pv 20df64 Operating Instructions

							Getting Started TV Operation
Disc OperationInformation
TV / DVD Combination
Operating Instructions
Models No. 
•  Initial Setup and Connection Procedures are on page 18.
MULTI FORMAT PLAYBACK
*Ability to play back may depend on recording 
conditions.
As an ENERGY STA R® Partner, Matsushita Electric Corporation 
of America has determined that this product or product model 
meets the 
ENERGY STA R® guidelines for energy efficiency.
Please read these instructions carefully before attempting to connect, 
operate, or adjust this product. Please save this manual.
Spanish Quick Use Guide is included.
(Guía para rápida consulta en español está incluida.)
This operating instruction book is designed for use with models PV-20DF64 and PV-27DF64. 
Illustrations in this manual show the PV-27DF64. Fea tures may vary, so please read care ful ly.
PV-20DF64/PV-27DF64
LSQT0777 A 
						

							2
Before Using
For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
On your purchase of one of the most 
sophisticated and reliable products on the 
market today. Used properly, it will bring you 
and your family years of enjoyment. Please 
fill in the information below. The serial 
number is on the tag located on the back of 
your unit.
Please check and identify the supplied 
accessories.
Use numbers indicated in parentheses 
when asking for replacement parts.Date of Purchase _______________
Dealer Purchased From __________
Dealer Address _________________
Dealer Phone No. _______________
Model No.   ____________________
Serial No. _____________________
1 Remote Control (EUR7724010)
2 Batteries “A A”
Congratulations
  Accessories
The unit may tip or fall if not situated on a 
stable surface, if pushed, or during an 
earthquake. Use a strong rope or chain 
(not included) to fasten the unit firmly to 
a strong wall support.
WARNING
  Safety Precaution
Be sure to read the following cautions 
carefully.
Always grasp 
bottom and front 
of unit as shown 
for proper 
balance.
To avoid injury to 
hands, always 
hold unit by area 
shown with arrow 
when resting it 
on a flat surface.
■ PV-27DF64 only
To order accessories, call toll free 
1- 800 - 332- 5368. 
						

							3
Getting StartedGetting Started TV Operation
Disc OperationInformation
  Table of Contents
Getting
 Started
TV
 Operation
Disc
 Operation
Information
Before Using ..................................................................................2
Safety Precautions/Mesures de sécurité ...................................4
IMPORTANT SAFEGUARDS AND PRECAUTIONS ....................6
Information (Unit) ..........................................................................8
Information (Disc) .........................................................................9
Location of Controls ................................................................... 11
Connections ................................................................................ 14
Initial Setup -Ready to Play- ...................................................... 18
Tuning TV ..................................................................................... 19
TV Operation ...............................................................................22
MTS Broadcast / TV Stereo System ..........................................24
TV Timer Features .......................................................................25
Closed Caption System ..............................................................26
Video / Audio Menu .....................................................................28
Weak Signal Display Feature .....................................................30
V- Chip Control Features ............................................................ 31
Display Feature ........................................................................... 37
Basic Disc Operation ..................................................................38
Disc Operation -In PLAY mode- ................................................40
DVD-RAM Operation ...................................................................44
Disc Operation -Using Information Screen- ............................46
Special Disc Operation ..............................................................50
Settings for DVD Operation .......................................................54
Warning and Instruction Displays ............................................59
Before Requesting Service ........................................................60
Spanish Quick Use Guide
Guía rápida de uso en español - Conexión - .................................62Guía rápida de uso en español - Funcionamiento del televisor - ...63Guía rápida de uso en español - Funcionamiento del disco- ........65
Limited Warranty ........................................................................68
Customer Services Directory ....................................................69
Glossary ....................................................................................... 70
Specifications ............................................................................. 71
Index .............................................................................................72 
						

							4
  Safety Precautions/Mesures de sécurité
For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS 
EQUIPMENT TO RAIN OR MOIS TURE.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO 
WIDE SLOT IN WALL SOCKET. FULLY INSERT.
CAUTION
FCC NOTICE:
This equipment has been tested and found to comply with part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful interference when 
operated in a residential environment. If this equipment does cause interference to radio or 
television reception, which can be determined by turning the equipment off and on, use the 
equipment in another location and/or utilize an electrical outlet different from that used by 
the receiver. If necessary, consult the dealer or an experienced radio/TV technician for 
help. You may find the booklet, “Something About Interference” available from FCC local 
regional offices helpful.
This product utilizes both a Cathode Ray Tube (CRT) and other components that contain 
lead. Disposal of these materials may be regulated in your community due to environmental 
considerations. For disposal or recycling information please contact your local authorities, 
or the Electronics Industries Alliance: 
FCC WARNING :
ANY UNAUTHORIZED CHANGES OR MODIFICATIONS TO THIS 
EQUIPMENT WOULD VOID THE USER’S AUTHORITY TO OPERATE.
AVERTISSEMENT :
AFIN DE PRÉVENIR TOUT RISQUE D’INCENDIE OU DE CHOCS 
ÉLECTRIQUES, NE PAS EXPOSER CET APPAREIL À LA PLUIE OU À 
UNE HUMIDITÉ EXCESSIVE.
Attention :
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA 
PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE 
LA PRISE ET POUSSER JUSQU’AU FOND. 
						

							5
Getting Started
CAUTION:
LASER R ADIATION WHEN OPEN. DO 
NOT STARE INTO BEAM.
(Inside of product)
This television receiver provides display of television closed captioning.This symbol warns the user that uninsulated 
voltage within the unit may have sufficient 
magnitude to cause electric shock. 
Therefore, it is dangerous to make any kind 
of contact with any inside part of this unit.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
RISK OF ELECTRIC SHOCK
DO NOT OPENCAUTION
CAUTION:
UNIT IS A CLASS I LASER PRODUCT.
HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE 
HAZARDOUS R ADIATION EXPOSURE IF DIRECTED. BE SURE TO OPER ATE THE 
UNIT CORRECTLY AS INSTRUCTED.
WHEN THIS UNIT IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE YOUR EYES 
CLOSE TO THE OPENING OF THE DISC TR AY AND OTHER OPENINGS TO LOOK 
INTO THE INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES 
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS R ADIATION 
EXPOSURE. 
DO NOT OPEN COVERS AND DO NOT ATTEMPT TO REPAIR THE UNIT YOURSELF. 
REFER SERVICING TO QUALIFIED PERSONNEL.
This symbol alerts the user that important 
literature concerning the operation and 
main te nance of this unit has been included. 
Therefore, it should be read carefully in order 
to avoid any problems.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098, and 4,907,093, 
licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by method 
claims of certain U.S. Patents and other intellectual property rights owned by Macrovision 
Corporation and other rights owners. Use of this copyright protection technology must be 
authorized by Macrovision Corporation, and is intended for home and other limited viewing 
uses only unless otherwise authorized by Macrovision Cor po ra tion. Reverse engineering 
or dis as sem bly is prohibited.AT T E N T I O N :
R AYONNEMENT LASER EN CAS 
D’OUVERTURE.
NE PAS REGARDER DANS LE 
FA I SC E AU. 
						

							6
  IMPORTANT SAFEGUARDS AND PRE CAU TIONS
For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
4  DO NOT BLOCK VENTILATION 
HOLES
  Ventilation openings in the cabinet release heat 
generated during operation. If blocked, heat 
build-up may result in a fire hazard or heat 
damage to discs.
 For your protection:
a.  Never cover ventilation slots while unit is 
ON, or operate unit while placed on a bed, 
sofa, rug, or other soft surface.
b.  Avoid built-in installation, such as a book 
case or rack, unless properly ventilated.
5  AVOID EXTREMELY HOT LOCATIONS 
OR SUDDEN TEMPERATURE 
CHANGES
  Do not place unit over or near a heater or 
radiator, in direct sunlight, inside closed 
ve hi cles, in high temperature locations [over 
95 °F (35 °C)], or in over 75 % humidity. If unit 
is suddenly moved from a cold place to a warm 
one, moisture may con dense in unit and on the 
disc causing dam age. Never sub ject unit to 
vibration, im pact, or place it so that the sur face 
is tilted as in ter nal parts may be se ri ous ly 
dam aged.
6  TO AVOID PERSONAL INJURY
•  Never place unit on support or stand that is 
not firm, level, and adequately strong. The 
unit could fall causing serious injury to a child 
or adult and damage to the unit.
•  Move any appliance and cart 
combination with care. Quick 
stops, excessive force, and 
uneven sur faces may cause 
objects to overturn.
•  Carefully follow all operating 
instructions.
TO REDUCE THE RISK OF ELECTRIC SHOCK, FIRE, INJURY TO 
PERSONS OR DAMAGE TO THIS PRODUCT, READ AND RETAIN ALL 
SAFETY AND OPERATING INSTRUCTIONS. HEED ALL WARNINGS IN 
THE MANUAL AND ON THE PRODUCT.
INSTALLATION
1   POWER SOURCE CAUTION
  Operate only from power source indicated on 
unit or in this manual. If uncertain, have your 
Electric Utility Service Company or Video 
Products Dealer verify your home power 
source.
2   POWER CORD PLUG
  For safety, this unit has a polarized type plug 
(one wide blade), or a three-wire grounding 
type plug. Always hold the plug firmly and 
make sure your hands are dry when plugging 
in or unplugging the AC power cord. Regularly 
remove dust, dirt, etc. on the plug.
POLARIZED PLUG CAUTION:
  The plug fits into outlet only one way. If it 
cannot be fully inserted, try reversing it. If it still 
will not fit, have an electrician install the proper 
wall outlet. Do not tamper with the plug.
GROUNDING PLUG CAUTION:
  The plug requires a three-hole grounding 
outlet. If necessary, have an electrician install 
the proper outlet. Do not tamper with the plug.
3   POWER CORD
  To avoid unit malfunction, and to protect 
against electrical shock, fire or personal injury:
-  Keep power cord away from heating 
appliances and walking traffic. Do not rest 
heavy objects on, or roll such objects over the 
power cord.
-  Do not tamper with the cord in any way.
-  An extension cord should have the same type 
plug (polarized or grounding) and must be 
securely connected.
-  Overloaded wall outlets or extension cords 
are fire hazards.
-  Frayed cords, damaged plugs, and damaged 
or cracked wire insulation are hazardous and 
should be replaced by a qualified electrician.
WARNING 
						

							7
Getting Started1  SAFE ANTENNA AND CABLE 
CONNECTION
  An outside antenna or cable system must be 
properly grounded to provide some protection 
against built up static charges and voltage. 
Section 810 of the National Electrical Code, 
ANSI/ NFPA 70 (in Canada, part 1 of the 
Canadian Electrical Code) provides information 
regarding proper grounding of  the mast and 
supporting structure, grounding of the lead-in 
wire to an antenna discharge unit, size of 
grounding conductors, location of antenna 
discharge unit, con nec tion to grounding 
electrodes, and requirements for the grounding 
electrode.
2   KEEP ANTENNA CLEAR OF HIGH 
VOLTAGE POWER LINES OR 
CIRCUITS
  Locate an outside antenna system well away 
from power lines and electric light or power 
circuits so it will never touch these power 
sources should it 
ever fall. When 
installing antenna, 
absolutely never 
touch power lines, 
circuits or other 
power sources as 
this could be fatal.
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENTANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC- NATIONAL ELECTRICAL CODE
OUTDOOR ANTENNA INSTALLATIONUSING THE UNIT
SERVICE
Before unit is brought out of storage or 
moved to a new location, refer again to the 
INSTALLATION section of these safe guards.
1  KEEP UNIT WELL AWAY FROM 
WATER OR MOISTURE, 
  such as vases, sinks, tubs, etc.
2  IF EXPOSED TO RAIN, MOISTURE, 
OR STRONG IMPACT, 
  unplug unit and have it inspected by a qualified 
service technician before use.
3 ELECTRICAL STORMS
  During a lightning storm, or before leaving unit 
unused for extended periods of time, 
disconnect all equipment from the power 
source as well as the antenna and cable 
system.
4  WHEN UNIT IS PLUGGED IN
• DO NOT OPER ATE IF:
- liquid has spilled into unit.
- unit was dropped or other wise damaged.
- unit emits smoke, odours, or noises. 
Immediately unplug unit, and have it 
inspected by a service technician to avoid 
potential fire and shock hazards.
•  Never drop or push any object through 
openings in unit. Touching internal parts may 
cause electric shock or fire hazard. Do not 
put any foreign object on the tray.
•  Keep magnetic objects, such as speakers, 
away from unit to avoid electrical interference.
5 USING ACCESSORIES
  Use only accessories recommended by the 
manufacturer to avoid risk of fire, shock, or 
other hazards.
6 CLEANING UNIT
  Unplug unit. Use a clean, dry, chemically 
untreated cloth to gently remove dust or debris. 
DO NOT USE cleaning fluids, aerosols, or 
forced air that could over-spray, or seep into 
unit and cause electrical shock. Any substance, 
such as wax, adhesive tape, etc. may mar the 
cabinet surface. Exposure to greasy, humid, or 
dusty areas may adversely affect internal parts.
1  DO NOT SERVICE PRODUCT 
YOURSELF
  If, after carefully following detailed operating 
in struc tions, the unit does not operate properly, 
do not attempt to open or remove covers, or 
make any adjustments not described in the 
manual. Unplug unit and contact a qualified 
service tech ni cian.
2  REPLACEMENT OF PARTS
  Make sure the service technician uses only 
parts specified by the manufacturer, or have 
equal safety char ac ter is tics as original parts. 
The use of unauthorized substitutes may result 
in fire, electric shock, or other hazards.
3  SAFETY CHECK AFTER SERVICING
  After unit is serviced or repaired, request that a 
thorough safety check be done as described in 
the manufacturer’s service literature to ensure 
video unit is in safe operating condition. 
						

							8
Information (Unit)
For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
•  Insert so the poles (+ and - ) match those in the 
remote control.
•  Do not use rechargeable type batteries.
1 Open the 
cover.
3 Close the 
cover. 2 Insert 
batteries as 
marked.
Do not:
•  Mix old and new batteries.
•  Use different types at the same time.
•  Heat or expose to flame.
•  Take apart or short circuit.
•  Attempt to recharge alkaline or manganese 
batteries.
•  Use batteries if the covering has been peeled 
off.
Mishandling of batteries can cause 
electrolyte leakage which can damage items 
the fluid contacts and may cause a fire.
Remove if the remote control is not going to 
be used for a long period of time. Store in a 
cool, dark place.
  Loading the Batteries
Unit auto adjusts clock for DST (Daylight 
Saving Time.)
  DST (Daylight Saving Time)
•  If your area does not observe Daylight Saving 
Time, select DST : OFF (see “Manual Clock 
Setting” on page 20).
■  Spring (First Sunday in April)
DST: ON ➞ Sets clock ahead one hour.
■  Autumn (Last Sunday in October)
DST: ON ➞ Turns clock back one hour. 
						

							9
Getting Started
Information (Disc)
*A process that allows play on compatible 
equipment.
  Discs that can be played

						

							10For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
•  The region number of this player is “1”.
•  The player will play DVD-Video marked with 
labels bearing “1” or “ALL”.
1
For U.S.A. and Canada
Example:
ALL2
4 1
  Disc Handling
This unit is designed and man u fac tured to 
respond to the Region Management 
Information that is recorded on a DVD disc. If 
the Region number described on the DVD 
disc does not cor re spond to the Region 
number of this unit, this unit cannot play this 
disc.
  Region Management Information
Handling 
precautions
•  Sticking a label on the 
disc may impair DVD-R 
playback.
•  Do not attach sticker to 
disc. (Do not use discs 
with exposed adhesive 
from tape or left over 
peeled-off stickers.)
•  Only hold disc by edges 
as shown below. 
Fin ger prints, dirt and 
scratches can cause 
skipping and distortion.
•  Do not write on label 
side of disc.
•  Never use record 
cleaning sprays, 
benzine, thinner, static 
electricity prevention 
liquids, or any other 
solvent.
•  Do not try to close disc 
tray when disc is not 
properly placed.Disc tray
Disc
If disc is brought from a cold to a warm 
environment, moisture may form on the 
disc
Wipe away moisture with a soft, dry, lint-free 
cloth before using disc. (See above.)
Improper disc storage
Discs can be damaged if stored or left in 
these environment:
•  Exposed to direct sunlight.
•  Areas that are humid or dusty.
•  Near heat (i.e. heater, radiator, etc.).
With a soft, damp (water only) cloth, gently 
wipe from the center hole to the outer edge 
as shown below. (Wiping in a circular pattern 
will scratch the surface.)
  To clean disc surface
•  DVD-R AM, DVD-R : 
  Clean only with the DVD-R AM disc cleaner 
available. Never use cloths or cleaners for CDs, 
etc.