Panasonic Tv Dvd Combination Pv 20df64 Operating Instructions

11
Getting Started
  Location of Controls
 
Remote Control Buttons
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1718
19
20
21
22
23
24
25
26
27
28
31 29
30
1
  OPEN / CLOSEOpens or closes the disc tray.
2 
POWERTurns the unit on or off.
3 
DISPLAYDisplays the T V status and 
clock. In DVD mode, displays 
disc and unit information.
4  RAPID TUNEDisplays the last channel you 
were watching.
5  MUTEMutes the sound instantly.
6 
INPUTChanges input source.
7 
ACTIONDisplays Main Menu.
8 
SELECT ▲▼ ◄ ►Controls...

12For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo

13
Getting Started

14
Connections
For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo

15
Getting Started
Connects VCRs and other peripheral equipment

16For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
Enjoy the powerful movie theater and hall-like sound available with multiple channel audio 
found on DVDs by connecting an amplifier and speakers. There are two types of connection, 
digital and analog.
Connect an amplifier to enjoy high-quality 
stereo sound with sampling frequencies of 
96 kHz.

17
Getting Started
IMPORTANT NOTE:
Caution for optical digital audio output 
connector:
•  When connecting an amplifier (with an optical 
digital input connector) which does not contain 
the Dolby Digital or dts decoder, be sure to 
select “PCM” at “Dolby Digital” and “PCM” at “dts” 
in the Settings for DVD Operation “Selecting 
AUDIO OUTPUT” (see pages 56 -57). Other wise, 
any attempt to play DVDs may cause such a high 
level of noise that it may be harmful to your ears 
and damage your speakers.
•  Be...

18For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
Please make all cable or antenna 
connections before powering on.
Plug the unit power cord into an AC wall 
outlet.Settings are made 
automatically. When 
complete, this screen 
appears.
If setup is incomplete, 
the following screen 
appears. Check 
connection of 
Antenna/Cable to the 
RF in Terminal, then 
try manually to set the 
clock as follows.
a.  Press ACTION on the Remote...

19
TV Operation
5 Press ▲▼ to select “AUTO SET,” 
then press SET.
•  After Channel Auto Set is finished, Clock Auto 
Set will be performed. (If clock is set manually, 
Clock Auto Set will not be performed.)
2 Press ▲▼ ◄ ► to select “CH.”
3 Press SET. 1  Press ACTION to display MAIN 
MENU.

20For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
SET CLOCK
10/25/2004 MON 11:45AM
DST:ON
SELECT: SET:SET
END :ACTION
4 Press ▲▼ to select “MANUAL,” then 
press SET.
(“TIME ZONE ADJUST” appears only when 
auto clock is set.)
2 Press ▲▼ ◄ ► to select “CLOCK.”
3 Press SET.1  Press ACTION to display MAIN 
MENU.
5 Press ▲▼ and press SET to select 
and set the month, date, year, time, 
and DST (Daylight Saving Time). 
  To Make...