Panasonic Th 65pf10rk Operating Instructions

0
NormalNormalise
Auto Setup
Pos. /Size
V-Pos
0
H-Pos
V-SizeDot ClockH-Size
Clock Phase
1:1 Pixel ModeOff
000
0
0
0
0
NormalNormalise
Pos. /Size
V-Pos H-Pos0
V-SizeH-Size
1:1 Pixel ModeOff
Auto Setup
21
Adjusting Pos. /Size
1Press to display the Pos. /Size menu.
Press to select Auto Setup / H-Pos / H-Size / V-Pos / 
V-Size / Dot Clock / Clock Phase / 1:1 Pixel Mode.
Press to adjust Pos. / Size.
Press to exit from adjust mode.
3 2
Notes:
•  Unadjustable items are grayed out.
  Adjustable items differ...

22
Adjusting Pos. /Size
While the Pos. /Size display is active, if either the N button on the remote control is pressed at any time or the ACTION 
( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
Helpful Hint (  
 / Normalise 
 Normalisation)
Auto SetupAutomatically adjust H-Pos / V-Pos / Clock Phase / Dot Clock and set H-Size / V-Size the 
standard value when RGB signal is input.
Notes:
• If the dot clock frequency is 162 MHz or higher, Dot Clock...

ABABAB
BABABA
PC1
VIDEO2PC1
VIDEO2
VIDEO2
VIDEO1PC1
VIDEO2
A
A A
CB
B
B
D
MULTI PIPMULTI PIPMULTI PIP
SWAPSWAPSWAP
SELECT
23
MULTI PIP
Press repeatedly.
Each time pressing this button main picture and sub picture will be displayed 
as follows below.
Press to swap main 
picture and sub picture.
Press to select the input mode.
Under main Picture and sub picture display, select the 
picture which you would like to change input modes.
Notes:
•  The sub picture sound is heard while a sub 
picture operation is...

One screen  Advanced PIP
Main screen Sub screen123
654
Options 
On Weekly Command Timer Onscreen display Off Initial INPUT Initial VOL level 
1/3 
 
Off  Off 
0  0 Maximum VOL level Off INPUT lock Off Button lock Off Remocon User level Off Advanced PIP 
24
Advanced PIP
1
2
3
5Press to display the Setup menu.
Press to select “OSD Language”.
Press and hold until the Options menu is displayed.
Press to select Advanced PIP.
Press to adjust the menu.
Off : Sets normal two screen display mode
        (see page...

1/2 Picture 
Normal Normalise Normal 
25 
0 
0 
0 
5  Brightness 
Sharpness  Picture Mode 
Colour  Contrast 
Hue
2/2Picture
Advanced settings White balance
Colour ManagementNormal
Off
On
Advanced settings
NormalNormalise0
0
2.2
Off
1/2
Black extension
AGC Gamma Input level
Advanced settings
0
0
0
0
0
0
2/2
W/B Low B W/B High R
W/B Low R
W/B Low G W/B High G
W/B High B
25
Press “ ” or “   ” button to switch between modes.
Normal
For viewing in standard (evening lighting) 
environments.
This menu selects...

26
Picture Adjustments
Notes:
•  “Colour” and “Hue” settings cannot be 
adjusted for “RGB/PC” and “Digital” 
input signal.
• You can change the level of each 
function (Contrast, Brightness, Colour, 
Hue, Sharpness) for each Picture 
Mode.
• The “Hue” setting can be adjusted 
for NTSC signal only during “AV
(S Video)” input signal.
•  In Contrast, there is not a noticeable 
change even when contrast is 
increased with a bright picture or 
reduced with a dark picture.
Advanced settings
On the remote...

Sound 
Normal Normalise Normal 
0 
0 
0 
Off 
Treble 0 
Mid  Sound Mode 
Balance Bass 
Surround 
Main  Audio Out (PIP) 
1/2
27
Sound Adjustment
1
Press to display the Sound menu.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
Note:
Bass, Mid, Treble and Surround settings are memorized separately for each Sound Mode.
2Select to adjust each item.
While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or the 
ACTION (...

2/2
Sound Out Left Channel
Right ChannelChannel 1
Channel 1
Off
Level MeterOff
SDI Sound Output
On Surround
28
SDI Sound Output
Notes:
•  This menu is available only when selecting a slot that HD-SDI Terminal Board with audio (TY-FB10HD) is installed.
•  This menu is unavailable when 2-picture display mode is active.
SURROUND
This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) is installed to the unit.
Item Details
Left ChannelChannel 1 to Channel 16
Selects left audio channel.
Right...

× 1× 2× 3× 4
1
Exit
2
EXIT
2
INPUT MENU ENTER/+/ VOL-/
29
Digital Zoom
1
3 2
4
This displays an enlargement of the designated part of the displayed image. 
Display the operation guide.
Press to access Digital Zoom.
The operation guide will be displayed.
Select the area of the image to be enlarged.
Press on the enlargement location to select.
Select the magnifi cation required for the enlarged display.
Each time this is pressed, the magnifi cation  factor  changes. 
This is shown in the image being...

1/2
PC
Off
Standby save
Off
Power management
Off
Auto power off
Off
OSD LanguageEnglish (
UK) Component/RGB-in select
RGB
Input labelSignal
Power save
Setup
2/2 Setup 
Screensaver 
MULTI DISPLAY Setup 
Set up TIMER
Portrait Setup
PRESENT TIME Setup
PRESENT  TIME Setup 
PRESENT  TIME    MON  99:99
Set 
PRESENT  TIME99:99
DAYMON
PRESENT  TIME Setup 
PRESENT  TIME    MON  99:99
Set 
PRESENT  TIME10:00
DAYTUE
30
PRESENT TIME Setup / Set up TIMER
The timer can switch the Plasma Display On or Off.
Before...