Panasonic Th 65pf10rk Operating Instructions

SERIAL
6789 13452
STX C1 C2 C3 P1 P2 P3 P4: P5 ETX
11
SERIAL Terminals connection
Notes:
•  Use the RS-232C cable to connect the computer to the Plasma Display.
•  The computer shown is for example purposes only.
•  Additional equipment and cables shown are not supplied with this set.
The SERIAL terminal conforms to the RS-232C interface specifi cation, so that the Plasma Display can be controlled 
by a computer which is connected to this terminal.
The computer will require software which allows the...

SLOT2
AUDIODVI-D IN
SLOT3 
P R /C R /R P B /C B /B Y/G AUDIO R L COMPONENT/RGB IN 
AUDIO 
OUT  Y ,  P 
B ,    P R , 
OUT P
R
P B 
Y 
L 
R 
COMPONEN T VIDEO OUT 
12
Connections
DVI-D connection
Mini-plug (M3) DVI-D
video cable 
(Within 5 m) PC with DVI-D 
video out
Pin No.    Signal Name  Pin No.   Signal Name 
1T.M.D.S. data 2-13T.M.D.S. data 3+
2T.M.D.S. data 2+14+5 V DC
3T.M.D.S. data 2/4 shielded15Ground 
4T.M.D.S. data 4-16Hot plug sense 
5T.M.D.S. data 4+17T.M.D.S. data 0-
6DDC clock18T.M.D.S. data...

INPUT MENU  ENTER/ +/  VOL -/ 
PC
16:9Italiano 
 
Español 
 
ENGLISH (US) 
English (UK) 
Deutsch 
Français 
 
OSD Language 
Set Select
13
Power On / Off
Connecting the AC cord plug to the Plasma Display.
Fix the AC cord plug securely to the Plasma Display 
with the clamper. (see page 8, 9) 
Connecting the plug to the Wall Outlet
Notes:
•  Main plug types vary between countries. The power plug shown 
at right may, therefore, not be the type fi tted to your set.
•  When disconnecting the AC cord, be...

14
Power On / Off
Press the  button on the remote control to turn the Plasma Display off.
Power Indicator: Red (standby)
Press the 
 button on the remote control to turn the Plasma Display on.
Power Indicator: Green
Turn the power to the Plasma Display off by pressing the 
   switch on the 
unit, when the Plasma Display is on or in standby mode.
Note: 
During operation of the power management function, the power indicator turns 
orange in the power off state.
 

1/2 
Signal 
PC 
Off 
Standby save Off 
Power management Off 
Auto power off Off 
OSD Language English (
UK)  Component/RGB-in select 
RGB 
Input label 
Power save 
Setup 
INPUT MENU  ENTER/ + /  VOL - / 
INPUT MENU  ENTER/ + /  VOL - / 
15
Initial selections
.......(Japanese)  .......(Chinese)  Italiano  Français  Deutsch  English(UK) 
Español 
ENGLISH(US) 
Selecting the On-Screen Menu Language
Press to display the Setup menu.
Press to select the OSD Language.
Press to select your preferred language....

INPUT MENU ENTER/+/ VOL-/
16
Basic Controls
Main Unit
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu 
screen will switch. (see page 18)
INPUT button
(INPUT1, INPUT2, INPUT3 and PC selection)
(see page 15)Volume Adjustment
Volume Up “+” Down “–” 
When the menu screen is 
displayed:
“+” : press to move the cursor up 
“–” : 
press to move the cursor down 
(see page 18)
Enter / Aspect button 
(see page 18, 20)
Normal Viewing PICTURE SET UP
SOUND POS. /SIZE
Remote control sensor
Main...

Off  timer 90
2
3 1
PC4:3
17 Basic Controls
Standby (ON / OFF) button
The Plasma Display must fi rst be plugged into 
the wall outlet and turned on at the power switch 
(see page 13, 14).
Press ON to turn the Plasma Display On, from 
Standby mode. Press OFF to turn the Plasma 
Display Off to Standby mode.
SET UP button (see page 18, 19)
SOUND button (see page 27)
DIRECT INPUT buttons
Press the INPUT “1”, “2”, “3” or “PC” 
input mode selection button to select 
the INPUT mode. (see page 15)
This button is...

1/2 Picture 
Normal Normalise Normal 
25 
0 
0 
0 
5  Brightness 
Sharpness  Picture Mode 
Colour  Contrast 
Hue
2/2Picture
Advanced settings White balance
Colour ManagementNormal
Off
On
0
NormalNormalise
Auto Setup
Pos. /Size
V-Pos
0
H-Pos
V-SizeDot ClockH-Size
Clock Phase
1:1 Pixel ModeOff
000
00
0
0
NormalNormalise
Pos. /Size
V-Pos H-Pos0
V-SizeH-Size1:1 Pixel ModeOff
Auto Setup
Advanced settings
NormalNormalise0
0
2.2
Off
1/2
Black extension
AGC Gamma Input level
Advanced settings
0
0
0
0
0
0
2/2
W/B...

Sync
P-NR
Signal
H-Freq.
V-Freq.kHz
Hz33.8
60.0
[ 
RGB ]
Cinema reality
Block NR
Mosquito NR
Auto
Off
Off
Off
OffCinema reality
P-NR
Signal [ 
Component ]
Block NR
Mosquito NR
Off
Off
Off
Off3D Y/C Filter (NTSC)
Colour system
Signal
Cinema reality
Panasonic Auto  (4:3)
[ 
AV ]
P-NRBlock NR
Mosquito NR
On
Auto
Off
4:3
Off
Off
Off
Set up TIMER
POWER OFF Function
POWER OFF Time POWER ON Time POWER ON FunctionOff
0:00
Off
0:00 PRESENT  TIME    99:99
Set up TIMER
POWER OFF Function
POWER OFF Time POWER ON...

4 : 3 16 : 9
4 : 3 Zoom 16 : 9
Panasonic Auto Just
INPUT MENU ENTER/+/ VOL-/
20
ASPECT Controls
The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema 
format picture.
[During MULTI PIP Operations]
• Picture and Picture, Picture in Picture  :
• Others        :    Aspect switching is not possible.
Notes:
•  For PC signal input, the mode switches between “4 : 3”, “Zoom” and “16 : 9” only.
•  For a 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p ·...