Panasonic Th 65pf10rk Operating Instructions

Please read these instructions before operating your set 
and retain them for future reference.Model No.
Operating Instructions 
High Defi nition Plasma Display
English
The illustration shown is an image.
TH-50PF10EK
TH-65PF10EK
 

2
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of 
enjoyment from your new Plasma Display.
To obtain maximum benefit from your set, please read these Instructions before making 
any adjustments, and retain them for future reference.
Retain your purchase receipt also, and note down the model number and serial number of 
your set in the space provided on the rear cover of these instructions.
Visit our Panasonic Web Site...

3
Important Safety Notice
WARNING
1)  To prevent damage which may result in fi re or shock hazard, do not expose this appliance to dripping 
or splashing.
  Do not place containers with water (fl ower vase, cups, cosmetics, etc.) above the set. (including on 
shelves above, etc.)
 No naked fl ame sources, such as lighted candles, should be placed on / above the set. 
2)  To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualifi ed 
service personnel.
3)  Do...

4
Safety Precautions
WARNING 
 Setup
This Plasma Display is for use only with the following optional accessories. Use with any other type of optional 
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.)
Always be sure to ask a qualifi ed technician to carry out set-up.
Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children....

5
Safety Precautions
 When using the Plasma Display
The Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz.
Do not cover the ventilation holes.
•  Doing so may cause the Plasma Display to overheat, which can cause fi re or damage to the Plasma Display.
Do not stick any foreign objects into the Plasma Display.
•  Do not insert any metal or fl ammable objects into the ventilations holes or drop them onto the Plasma Display, as 
doing so can cause fi re or electric shock.
Do not remove the cover...

6
Safety Precautions
   CAUTION
 
 When using the Plasma Display 
Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display.
•  Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands 
or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.
Be sure to disconnect all cables before moving the Plasma Display.
• If the Plasma Display is moved while some of...

+
+
- -
7
Accessories
Power supply cord Fixing bands × 2Batteries for the Remote 
Control Transmitter
(2 × R6 (UM3) Size) Remote Control 
Transmitter
EUR7636090R Operating Instruction book
Accessories Supply
Check that you have the accessories and items shown
Remote Control Batteries
Requires two R6 batteries.
1. Pull and hold the hook, then open 
the battery cover.2. Insert batteries - note correct 
polarity ( + and -).3. Replace the cover.
Helpful Hint:
For frequent remote control users, replace old...

1 2 
1 
2 
1 
2 
SERIAL  PC    IN 
AUDIO 
SLOT1 SLOT3 
P R /C R /R P B /C B /B Y/G AUDIO R L COMPONENT/RGB IN 
SLOT2
AUDIODVI-D IN
8
Connections
Speaker 
terminal (R)Speaker 
terminal (L)
– Cable fi xing bands Secure any excess cables with bands as required. When connecting the speakers, be sure to use only the optional accessory speakers.
Refer to the speaker’s Installation Manual for details on speaker installation.
Speakers (Optional accessories)
Pass the attached cable 
fi  xing band through the clip...

12
SERIAL  PC    IN 
AUDIO 
SLOT1 SLOT3 
P R /C R /R P B /C B /B Y/G AUDIO R L COMPONENT/RGB IN 
SLOT2
AUDIODVI-D IN
1
2
1
2
9
Connections
Speaker terminal (R)Speaker 
terminal (L)
– Cable fi xing bands Secure any excess cables with bands as required. When connecting the speakers, be sure to use only the optional accessory speakers.
Refer to the speaker’s Installation Manual for details on speaker installation.
Speakers (Optional accessories)
Pass the attached cable 
fi  xing band through the clip 
as...

AUDIO
PC IN
TH-42PS9
10
1
6 7 8 3
9 4 5
10
15 14 13 12 11
2
Notes:
•  Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input 
Terminal.
•  Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning 
frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)
• The display resolution is a maximum of 1,440 × 1,080 dots when...