Panasonic Th 50pf20 Operating Instructions

21
MULTI PIP
Swapping Screens
 
Each time this button is pressed, the main screen and sub screen are swapped.
Two screens
(P AND  P)
Main screen Sub screen
Two screens
(P OUT P)Two screens
(P IN P)
During Blend PIP (Composite Screen Function) :
A composite picture is displayed with the sub screen positioned over the main screen. For example, text data such as a 
computer image can be displayed as a caption over a movie or still image.
One screen FULL P IN P
Transparent Function and Insertion Function
Two...

22
MULTI PIP
Selecting the Target Screen for Operations
 
Each time this button is pressed, the target screen for operations changes.
PCVIDEOPCVIDEO
Main screen Sub screen
Main screen input mode Sub screen input mode
Operations on 
the main screenOperations on 
the sub screen
Notes:
•  When operations are performed for the sub screen, the sub screen audio is played.
•  If no operations are performed, the operation target returns to the main screen after about 5 seconds. 
  You can also return to main...

INPUT MENU  ENTER/ +/  VOL -/ 
2 
EXIT 
2 
1 
EXIT 
s1 
 s2 
 s3 
 s4 
23
VOL button
Digital Zoom
This displays an enlargement of the designated part of the displayed image.
Select the area of the image to be enlarged.
Press on the enlargement location to select.
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
Notes:
•  When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
•  The Digital Zoom function cannot be selected while in the following...

24
On-Screen Menu Displays
Remote Control Unit
1Display the menu screen.
Press to select.
(Example: PICTURE menu)
MENU
 Press several times.
Each time the MENU button is pressed, the 
menu screen will switch.
Normal Viewing PICTURE
SOUND POS. /SIZE
SET UP
2Select the item.
Select. Select.
 Press.25 
0 
0 
0 
5 
PICTURE 
NORMAL NORMALIZE STANDARD 
BRIGHTNESS 
SHARPNESS  PICTURE MENU 
COLOR  PICTURE 
TINT 
COLOR MANAGEMENTADVANCED SETTINGS
MEMORY SAVE
COLOR TEMPNORMAL
OFF
MEMORY LOAD
MEMORY EDIT
( Example:...

Page 26-28
Page 42
Page 35-54
Overview
Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.
Page 29-33
Page 34 Page 29-30
1/2
SIGNAL
EXTENDED LIFE SETTINGS
INPUT LABEL
SET UP
OFF
STANDBY SAVE
OFF
PC POWER MANAGEMENTOFFDVI-D POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB SCREENSAVER
POWER SAVE
2/2 SET UP
MULTI DISPLAY SETUP
SET UP TIMER
NETWORK SETUP
PRESENT TIME SETUP
DISPLAY ORIENTATIONLANDSCAPE...

00
NORMAL NORMALIZE 
AUTO SETUP
POS. /SIZE 
V-POS 
0 
H-POS 
V-SIZE DOT CLOCKH-SIZE 
CLAMP POSITION CLOCK PHASE
1:1 PIXEL MODEOFF
0 0 0 
0 
26
Adjusting POS. /SIZE
1Press to display the POS. /SIZE menu.
Press to select the menu to adjust.
Press to adjust the menu.
Press to exit from adjust mode.
Notes:
•  Adjustment details are memorized separately for different input signal formats. (Adjustments for component signals are 
memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i ·...

27
H-POSAdjust the horizontal position.V-POSAdjust the vertical position.
H-SIZEAdjust the horizontal size.V-SIZEAdjust the vertical size.
DOT 
CLOCK(During Component, RGB and PC input signal)
Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, 
adjust so that any such noise is minimized.
CLOCK 
PHASE(During Component, RGB and PC input signal)
Eliminate the 	 ickering and distortion.
OVER 
SCANTurn image over scan ON/OFF.
Con gurable signals are...

28
While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION 
(
  ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
Helpful Hint (  
 / NORMALIZE  
 Normalization)
Adjusting POS. /SIZE
1:1 PIXEL MODEAdjusts the display size when 1125i, 1125p or 1250i signal is input.
Notes:
•  Select ON when you would like to replay 1920 × 1080 input signal.
•  Applicable input signal;
  1125 (1080) /...

BLACK EXTENSION 
AGC  GAMMA  INPUT LEVEL 
ADVANCED SETTINGS 
NORMAL NORMALIZE 
W/B LOW B W/B HIGH R
W/B LOW R
W/B LOW G W/B HIGH G
W/B HIGH B0
0
2.2
0
0 0
0
0
0OFF
25 
0 
0 
0 
5 
PICTURE 
NORMAL NORMALIZE STANDARD 
BRIGHTNESS 
SHARPNESS  PICTURE MENU 
COLOR  PICTURE 
TINT 
COLOR MANAGEMENTADVANCED SETTINGS
COLOR TEMPNORMAL
OFF
29
PICTURE Adjustments
1
ADVANCED SETTINGS
Enables  ne picture adjustment at a professional 
level (see next page).Press to enter Advanced 
Settings.
While the “PICTURE” menu is...

30
PICTURE Adjustments
ADVANCED SETTINGS
Notes:
•  “COLOR” and “TINT” settings cannot be 
adjusted for “RGB/PC” input signal.
• 
You can change the level of each function 
(PICTURE, BRIGHTNESS, COLOR, TINT, 
SHARPNESS) for each PICTURE MENU.
• The setting details for STANDARD, DYNAMIC,
CINEMA and MONITOR respectively are 
memorized separately for each input terminal.
• The “TINT” setting can be adjusted for NTSC 
signal only during Video (S Video) input signal.
• In PICTURE, there is not a noticeable...