Panasonic Th 42pf11rk Operating Instructions

Sync
Auto
Sync
on G
Sync
VBS
H-Freq.
V-Freq.kHz
Hz63.98
60.02
Signal Format
1280×1024/60
Sync
Signal[ 
RGB ] 
Cinema realityXGA Mode
Auto
Off
1024 × 768
H-Freq.
Dot Clock Freq.kHz
MHz63.98
108.0 V-Freq.Hz
60.02
Signal Format
1280×1024/60
41
Select Signal from the “Setup” menu during RGB input signal.
Setting RGB sync signal:
Confi rm that the input is set to RGB input (this setting is valid only for RGB input 
signal).
Auto:  The H and V sync or synchronized signal are automatically selected. If 
both...

Options 
Weekly Command Timer 
1/3 
 
Initial INPUT  Onscreen display On 
O f  f 
Off Off
0 0Maximum VOL level Initial VOL levelOffINPUT lockOffButton lockOffRemocon User level
Options
EnableOff-timer functionNormalInitial Power Mode0ID selectOffRemote IDOffSerial IDOffDisplay sizeOffStudio W/BOffStudio Gain
2/3
3/3Options
Off
Off
Off Clock Display
Rotate
Off All Aspect
Slot1 Serial Slot Select Slot power
Off
Power On Screen Delay
42
Options Adjustments
1
2
3
5Press to display the Setup menu.
4
6
Item...

43
Options Adjustments
Item Adjustments
INPUT lockOff   PC   INPUT1   INPUT2   INPUT3
Locks the input switch operation.
Notes:
• Only the adjusted signal is displayed (see page 14).
• Signal can be displayed when the Terminal board is installed.
• Input switch can be used when this is set to “Off”.
• In two screen display mode, if anything other than “Off” is set, the value will be fi xed as the value input 
in the single screen display mode.
•  When a dual input terminal board is attached, A or B is...

44
Options Adjustments
Item Adjustments
Studio W/BOff:  Nullify all the settings adjusted.
On:  Sets the white balance for TV studio.
Note: Valid only when the “Warm” is set as “White balance” in Picture menu.
Studio GainSharpens the contrast for a better view when a part of the image is too light to see.
Off: Disables “Studio Gain”.
On:  Enables “Studio Gain”.
Note:  This setting is valid only when the input signals are as follows:
    Component Video, RGB (analog), SDI, HDMI
Slot PowerOff  Auto  On...

Options 
On Weekly Command TimerOnscreen display 
1/3 
 
Weekly Command Timer 
Program1MondayOnFunction
Program3Tuesday --- Wednesday Program3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
yProgram3Thursday --- Friday Program6Saturday Program4Sunday Program Edit 
Weekly Command Timer 
8:00 
10:30 0102
1/8
--:-- 03--:-- 04--:-- 
--:-- 0512:00 069:12 PON
IMS:SL1 
--- 
--- 
--- 
---  DAM:ZOOM 
AVL:10 0708
1Program
Weekly Command Timer 
20:00 
20:30 57 
58 
8/8 
 
22:00 59 --:-- 60 --:--...

1/2 
Signal 
PC
Off
Standby saveOff
Power managementOff
Auto power offOff
OSD LanguageEnglish (
UK) Component/RGB-in select
RGB
Input label
Power save
Setup 
Screensaver
SHIPPINGYES
Weekly Command Timer 
0210:30 Command No Time IMS:SL1 Command 
1Program
Weekly Command Timer 
Command 
02Command No 
IMS:SL1 10:30 Time 
1Program
46Options Adjustments
[from the unit]
1  Press the MENU button till the Setup menu is displayed.
2  Press the Volume Up“+” or Down“–” button to select “OSD Language”.
3  Press and...

47
Troubleshooting
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Symptoms
Checks
Picture Sound
InterferenceNoisy SoundElectrical Appliances
Cars / Motorcycles
Fluorescent light
Normal PictureNo SoundVolume
(Check whether the mute function has been activated on the remote control.)
No PictureNo SoundNot plugged into AC outlet
Not switched on
Picture and Brightness/Volume setting
(Check by pressing the power switch or stand-by button on the remote...

48
List of Aspect Modes
Aspect mode
Picture
 Enlarged screenDescriptionAll Aspect: 
OnFactory setting
All Aspect: Off
16:9 16:9
The display of the pictures fi lls the screen.
In the case of SD signals, pictures with a 4:3 aspect 
ratio are enlarged horizontally, and displayed. This 
mode is suited to displaying anamorphic pictures with 
a 16:9 aspect ratio.
14:9 14:9
Letterbox pictures with a 14:9 aspect ratio are enlarged 
vertically and horizontally so that their display fi lls the 
screen vertically and...

49
Applicable Input Signals
Signal nameHorizontal frequency 
(kHz)Vertical frequency 
(Hz)Component / RGB 
/ Mini D-sub 15P
(Dot clock (MHz))DVI-D
8
(Dot clock (MHz))
1  525 (480) / 60i 15.73 59.94 * (13.5)
2  525 (480) / 60p 31.4759.94 * (27.0)  

5* (27.0)
3 625 (575) / 50i  15.63 50.00 * (13.5)
4 625 (575) / 50p  31.25 50.00 *  (27.0)
5 625 (576) / 50p  31.25 50.00 *  (27.0)
6 750 (720) / 60p 45.0060.00 * (74.25) * (74.25)
7 750 (720) / 50p  37.50 50.00 * (74.25) * (74.25)
8  1,125 (1,080) / 60p...

50
Applicable Input Signals
Signal formatVertical 
frequency (Hz)Horizontal
frequency (kHz)Dot clock 
(MHz)Number of 
active pixelsTotal number 
of pixelsNumber of 
active linesTotal number 
of lines
1 VGA60 59.94 31.4725.18640 800 480 525
2 525/60p 59.94 31.4727.00720 858 480 525
3625/50p 50.00 31.25 27.00720 864576 625
4750/60p60.00 45.0074.25 1280 1650720750
5750/50p 50.00 37.5074.25 1280 1980720750
61125/60i60.00 33.7574.25 1920 2200 1080 1125
71125/50i 50.00 28.1374.25 1920 2640 1080 1125
8
1125/60p...