Panasonic Th 42pf11rk Operating Instructions

P R /C R /R P B /C B /B Y/G AUDIO R L 
COMPONENT/RGB IN
SLOT3
AUDIO 
OUT  Y  ,  P 
B ,    P R , 
OUT P
R
P B 
Y 
L 
R 
COMPONEN T VIDEO OUT 
PC    SLOT1SLOT2SLOT3
PR/CR/R PB/CB/BY/GAUDIORLCOMPONENT/RGB IN
HDMI 
AV OUTHDMI 
AV OUT
11
COMPONENT / RGB connection
Notes:
•  Change the “Component/RGB-in select” setting in the “Setup” menu to “Component” 
  (when Component signal connection) or “RGB” (when RGB signal connection). (see page 37)
•  Additional equipment, cables and adapter plugs shown are not...

INPUT MENU  ENTER/ +/  VOL -/ 
12
Power Indicator
Remote Control 
Sensor
Power On / Off
Connecting the AC cord plug to the Plasma Display.
Fix the AC cord plug securely to the Plasma Display 
with the clamper. (see page 8) 
Connecting the plug to the Wall Outlet
Notes:
•  Main plug types vary between countries. The power 
plug shown at right may, therefore, not be the type 
fi tted to your set.
• When disconnecting the AC cord, be absolutely 
sure to disconnect the AC cord plug at the socket 
outlet fi...

PC
16:9
Italiano 
 
Español 
 
ENGLISH (US) 
Русский English (UK) 
Deutsch 
Français 
 
OSD Language
PRESENT  TIME Setup 
PRESENT  TIME    MON  99:99
Set 
PRESENT  TIME99:99
DAYMON
PRESENT  TIME Setup 
PRESENT  TIME    MON  99:99
Set 
PRESENT  TIME10:00
DAYTUE
Landscape
Portrait
Display orientation
13
From the second time on, the below screen is displayed for a while (setting condition is an example).
Power On / Off
When fi rst switching on the unit
Following screen will be displayed when the unit is...

INPUT MENU  ENTER/ + /  VOL - / 
INPUT MENU  ENTER/ + /  VOL - / 
1/2 
Signal 
PC
Off
Standby saveOff
Power managementOff
Auto power offOff
OSD LanguageEnglish (
UK) Component/RGB-in select
RGB
Input label
Power save
Setup 
Screensaver
14
.......(Japanese) 
.......(Russian) 
Русский  .......(Chinese)  Italiano  Français  Deutsch  English(UK) 
Español 
ENGLISH(US) 
 Selectable languages Notes:
•  Selecting is also possible by pressing the INPUT button on the unit.
•  Input terminal will not be selected if...

INPUT MENU ENTER/+/ VOL-/
15
Basic Controls
Main Unit
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu 
screen will switch. (see page 21)
Normal Viewing Picture
Sound Pos. /Size Setup
INPUT button
(INPUT1, INPUT2, INPUT3 and PC selection)
(see page 14)Volume Adjustment
Volume Up “+” Down “–” 
When the menu screen is 
displayed:
“+” : press to move the cursor up 
“–” : 
press to move the cursor down
(see page 21)
Enter / Aspect button 
(see page 17, 21)
Remote control sensor
Main Power...

16
Standby (ON / OFF) button
The Plasma Display must fi rst be plugged into the wall outlet 
and turned on at the power switch (see page 12).
Press ON to turn the Plasma Display On, from Standby mode. 
Press OFF to turn the Plasma Display Off to Standby mode.
SET UP button (see page 21)
SOUND button (see page 26)
DIRECT INPUT buttons
Press the INPUT “1”, “2”, “3” or “PC” 
input mode selection button to select 
the INPUT mode. (see page 14)
This button is used to switch directly 
to INPUT mode.
Volume...

Zoom1 Zoom2
Just
Panasonic Auto
Zoom3
16:9 4:3
14:9
INPUT MENU ENTER/+/ VOL-/
17
ASPECT Controls
The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.
Note:
Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the aspect mode
select function to shrink or expand the picture, you may be violating the copyright under copyright law. It is prohibited to show or 
alter the...

18
MULTI PIP
You can display two pictures, such as a video image and computer image, in a two-screen display. (Use the remote 
control for this operation. It cannot be performed with the buttons on the main unit.)
MULTI PIP Setup
Set the functions and mode for two-screen display in “MULTI PIP Setup” in the Setup menu.
(see page 34)
Selecting the Display Mode
 Each time this button is pressed, the screen changes.
Note:
The screen changes in the same way when “Display Mode” in “MULTI PIP Setup” is changed....

19
MULTI PIP
Transparent Function and Insertion Function:
Two functions are available for blend PIP: the transparent function and the insertion function. Set these functions with 
“Transparency” or “Insert” in “MULTI PIP Setup”. (see page 34)
Transparent Function:
Data such as text are displayed transparently 
on the background image.Insertion Function:
The sub screen image is divided into transparent and non-transparent areas, and only 
the non-transparent areas are inserted and displayed on the...

×1×2×3×4
1
Exit
2 
Exit
2 
INPUT MENU ENTER/+/ VOL-/
20
Digital Zoom
1
3 2
4
This displays an enlargement of the designated part of the displayed image. 
Display the operation guide.
Press to access Digital Zoom.
The operation guide will be displayed.
Select the area of the image to be enlarged.
Press on the enlargement location to select.
Select the magnifi cation required for the enlarged display.
Each time this is pressed, the magnifi cation factor changes. 
This is shown in the image being displayed....