Panasonic Th 42pf11rk Operating Instructions

ME67 The illustration shown is an image.
Model No.
Operating Instructions 
High Defi nition Plasma Display
TH-42PF11RK
TH-50PF11RK
TH-58PF11RK
TH-65PF11RK
Please read these instructions before operating your set
and retain them for future reference.
English
 

2
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of 
enjoyment from your new Plasma Display.
To obtain maximum benefit from your set, please read these Instructions before making 
any adjustments, and retain them for future reference.
Retain your purchase receipt also, and note down the model number and serial number of 
your set in the space provided on the rear cover of these instructions.
Visit our Panasonic Web Site...

3
Important Safety Notice
WARNING
1)  To prevent damage which may result in fi re or shock hazard, do not expose this appliance to dripping 
or splashing.
  Do not place containers with water (fl ower vase, cups, cosmetics, etc.) above the set. (including on 
shelves above, etc.)
 No naked fl ame sources, such as lighted candles, should be placed on / above the set. 
2)  To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualifi ed 
service personnel.
3)  Do...

4
Safety Precautions
WARNING 
 Setup
This Plasma Display is for use only with the following optional accessories. Use with any other type of optional 
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Panasonic Corporation.)
Always be sure to ask a qualifi ed technician to carry out set-up.
Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard 
unneeded...

5
Safety Precautions
Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table 
cloths and curtains.
For suffi cient ventilation;
If using the pedestal (optional accessory), leave a space of 10 cm or more at the top, left and right, and 7 cm 
or more at the rear, and also keep the space between the bottom of the display and the fl oor surface.
If using some other setting-up method, follow the manual of it. (If there is no specifi  c indication of...

6
Safety Precautions
CAUTION
 When using the Plasma Display 
Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display.
•  Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands 
or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.
Be sure to disconnect all cables before moving the Plasma Display.
• If the Plasma Display is moved while some of the...

+
+
- -
7
Accessories Supply
Accessories
Power supply cord Fixing band × 1Batteries for the Remote 
Control Transmitter
(2 × R6 (UM3) Size) Remote Control 
Transmitter
EUR7636090R Operating Instruction book
Check that you have the accessories and items shown
Remote Control Batteries
Requires two R6 batteries.
1. Pull and hold the hook, then open 
the battery cover.2. Insert batteries - note correct 
polarity ( + and -).3. Replace the cover.
Helpful Hint:
For frequent remote control users, replace old...

SERIAL PC    IN
AUDIO
SLOT1 SLOT3
PR/CR/R PB/CB/BY/GAUDIORLCOMPONENT/RGB IN
SLOT2
12
1
2
1
2
1
2
8
Note:
Make sure that the AC 
cord is locked on both the 
left and right sides.Push
until
the hook 
clicks.
2.Pull
off. Close
Open
1Plug the AC cord into the 
display unit.
    Plug the AC cord until it clicks.
2Fix the AC cord with the clamper 
which is attached to the unit.
For the TH-42PF11RK, TH-58PF11RK:Clampers are not installed to this 
unit. Ensure there is suffi cient slack 
in the AC cord and fi rmly...

AUDIO
PC IN
TH-42PS9
9
Connections
1
6 7 8 3
9 4 5
10
15 14 13 1211
2
Notes:
•  Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input 
Terminal.
•  With regard to the typical PC input signals that are described in the applicable input signals list (see page 49), adjustment
values such as for the standard picture positions and sizes have already been stored in this unit. You can add up to eight 
PC input signal types that are not included...

SERIAL
6789 13452
10
SERIAL Terminals connection
Notes:
•  Use the RS-232C straight cable to connect the computer to the Plasma Display.
•  The computer shown is for example purposes only.
•  Additional equipment and cables shown are not supplied with this set.
The SERIAL terminal conforms to the RS-232C interface 
specifi cation, so that the Plasma Display can be controlled 
by a computer which is connected to this terminal.
The computer will require software which allows the 
sending and receiving of...