Panasonic Th 103vx200 Operating Instructions

41
Picture Pro les
You can lock saved pro les to restrict operations when the pro les are loaded. You can also set passwords.
Notes:
•  When the lock is set in “EXTENDED LIFE SETTINGS”, pro le cannot be locked.
•  If pro le is locked, the menu operations of “EXTENDED LIFE SETTINGS” are restricted. (see page 52)

Once a pro le is locked, the following operations are restricted when the pro le is loaded.
Setting Editing the Pro le
(MEMORY EDIT)Editing Picture Adjustment Values via the 
Menu...

42
Picture Pro les

Switches to “PICTURE MENU” mode display. 
1Follow steps 1–5 in the previous procedure, 
. 
2Select “isf Mode”.
Lock1
Change password MEMORY1
Off Off MEMORY2
MEMORY12
Off isf Mode2   adjust
1  select
3Specify “On” or “Off”. 
4Exit the menu.
      
Specifying “On” for isf Mode changes the “PICTURE MENU” mode display as follows. 
“PICTURE MENU” mode display
STANDARD PICTURE MENU
25
0
5 PICTURENORMAL IZE
BRIGHTNESS
6 COLOR
0 TINT
SHARPNESS
                          
isf Mode: Off isf...

43
SOUND Adjustment
1Display the menu screen.
2Select “SOUND”.
SET UP
POS. /SIZE
SOUND PICTURE
2  access
1  select
3Select the item and set.
2   adjust
1   select
BALANCE
0
1 NORMALIZE
VOLUME
4Exit the menu.    
     
While the “SOUND” menu is displayed, if the OK button is pressed during “NORMALIZE”, then all adjustment values 
are returned to the factory settings.
Helpful Hint (NORMALIZE    Normalization)
Item Details
BALANCEAdjusts left and right volumes.
VOLUMEAdjust the sound volume level.
Item...

44
1Display the menu screen.
2Select “SET UP”.
SET UP
POS. /SIZE
SOUND PICTURE
2  access
1  select
3Select the item and set.
EXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFFOFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH (
US)
SIGNAL
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUPINPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
3D SETTINGS
2  adjust
1   select
4Exit the menu.   
     
SET UP menu
COMPONENT / RGB IN SELECT
COMPONENT  RGB
Select to match the signals...

45
EXTERNAL SCALER MODE
OFF  ON
This menu can be used to specify whether the built-in scaler or an external scaler is used for scaler functions such as 
resizing and picture quality adjustment. 
The setting is valid with the following input signals. 
1125 (1080) / 24p·25p·30p·50p·60p
OFF: Use the built-in scaler.
ON: Use an external scaler.
Note:
If “ON” is set when other than corresponding signal is input, “Input signal must be 1125p(1080p)”message is displayed.
SET UP menu
Using Remote Control
Each...

46
SET UP menu
POWER SAVE
PC POWER MANAGEMENT
AUTO POWER OFF
OSD DESIGN
OSD POSITION
OSD LANGUAGE
OFF  ON
When this function is turned ON, luminous level of the Plasma Display is suppressed, so power consumption is 
reduced.
OFF 
 ON
Equipment power supply is turned OFF when there is no signal.
When this is set to ON, the power supply of the unit goes Off 10 minutes after the input signals stop. 
Select your preferred language. Choose the display position.
Note:
Each time you press 
 or , the on-screen...

47
SET UP menu
3D SETTINGS
If the 3D images are not displayed correctly or seem unusual, please adjust and setup the 3D settings.
EXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFFOFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH (
US)
SIGNAL
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUPINPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
3D SETTINGS
ON 3D EYEWEAR
OFF AUTO
3D INPUT FORMAT 3D SETTINGS
LEFT/RIGHT SWAP
SAFETY PRECAUTIONS
• 3D EYEWEAR
ON  OFF
ON: Use of 3D...

AUTO SYNC
1024 ×768
33.7    kHz
60.0    Hz
1125(1080)/60i XGA MODE
H-FREQ.
V-FREQ.
SIGNAL FORMAT SIGNAL[
 RGB ]
ON FRAME CREATION
AUTO
33.7    kHz
60.0    Hz
1125(1080)/60i XGA MODE
H-FREQ.
V-FREQ.
SIGNAL FORMAT SIGNAL[
 COMPONENT ]
ON 3D Y/C FILTER
AUTO COLOR SYSTEM SIGNAL[
 VIDEO ]
SIGNAL[
 Digital ]
ON 24p SMOOTH FILM
33.7    kHz
60.0    Hz
1125(1080)/60i H-FREQ.
V-FREQ.
108.0  MHz DOT CLOCK-FREQ.
SIGNAL FORMAT
60Hz 3D 24p FILM DISPLAY
AUTO HDMI RANGE
48
Note: 
“SIGNAL” setup menu displays a different...

49
SET UP menu
• SYNC
This function operates only during input from PC IN terminal.
Setting RGB sync signal
Con rm that the input is set to RGB input (this setting is valid only for RGB input signal).
AUTO: 
The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
ON G:  Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS:  Uses a synchronized signal of Composite Sync input, which is input from the HD...

50
SCREENSAVER
SET UP menu
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.
SCREENSAVER
NEGATIVE IMAGESTART
FUNCTIONEXTERNAL SCALER MODE
POWER SAVE
PC POWER MANAGEMENTAUTO POWER OFF OFFOFF OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH (
US)
SIGNAL
EXTENDED LIFE SETTINGSSCREENSAVER
NETWORK SETUPINPUT LABEL
COMPONENT/RGB-IN SELECT
RGB 3D SETTINGS
 
1FUNCTION selection
SCREENSAVER
NEGATIVE...