Panasonic Th 103vx200 Operating Instructions

31
PICTURE Adjustments
1Display the menu screen.
2Select “PICTURE”.
SOUND PICTURE
SET UP
POS. /SIZE
2  access
1  select
3Select the item and set.
2   adjust
1   select
STANDARD
ADVANCED SETTINGS PICTURE MENU
25
0
5
NORMAL PICTURENORMALIZE
BRIGHTNESS
6 COLOR
0 TINT
SHARPNESS
COLOR TEMP
4Exit the menu.
Note:
Menu that cannot be adjusted is grayout. Adjustable menu changes depending 
on signal, input and menu setting.
While the “PICTURE” menu is displayed, if the OK button is pressed during “NORMALIZE”,...

32
PICTURE Adjustments
 PICTURE MENU
You can switch to the optimal picture mode for the video source 
and viewing environment. 
  MONITOR STANDARD
CINEMA
DYNAMIC
STANDARD:
For viewing in standard (evening lighting) environments. 
This menu selects the normal levels of BRIGHTNESS 
and PICTURE.
DYNAMIC:
For viewing in brighter environments. This menu 
selects higher than normal levels of BRIGHTNESS and 
PICTURE.CINEMA:
Ideal for movies.
MONITOR:
For use when creating broadcast or movie content. With 
this...

33
Enables  ne picture adjustment at a professional level.
Notes:
The adjustment values are memorized separately for each input terminal. • 
The adjustment range values should be used as an adjustment reference. • 
Select the item and set.
ADVANCED SETTINGS
Carry out “W/B” adjustment as follows.
1. 
Adjust the white balance of the bright sections using the “W/B HIGH R” , “W/B HIGH G” and “W/B HIGH B” settings.
2. Adjust the white balance of the dark sections using the “W/B LOW R” , “W/B LOW G” and “W/B...

34
On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if the OK button is pressed during 
“NORMALIZE”, then all adjustment values are returned to the factory settings.
Helpful Hint (NORMALIZE    Normalization)
  3:2 
PULLDOWNWhen “ON”, the display attempts to reproduce a more natural 
interpretation of sources such as movie pictures, which are 
recorded at 24 frames per second.
If the picture is not stable, turn the setting to “OFF”.OFF
ON
Note:
When “ON”, this setting only...

35
Select the item and set.
Color space adjustment (COLOR GAMUT)
Changes the color space to BT.709 signal standard chromaticity point and  ne-tunes it.
0
2.2 INPUT LEVEL ADVANCED SETTINGS
NORMALIZE
GAMMA
0
0
OFF W/B HIGH R
W/B HIGH G
0 W/B HIGH B
0 W/B LOW R
0 W/B LOW G
0 W/B LOW B
3:2 PULLDOWN
OFF STUDIO GAIN0 BLACK EXTENSION
OFF NOISE REDUCTION
COLOR GAMUT
2  access
1  select
COLOR GAMUT COLOR GAMUT
NATIVE2   change
1   select
  COLOR GAMUT
DIGITAL CINEMA COLOR: Sets color gamut to reproduce the...

36
 RESET      Resets the adjustment value of color space.
Note:
This setting is re ected only for the selected input terminal and the “PICTUR MENU”.
1Select “RESET”.
R RATIO
G RATIO
B RATIORG B COLOR GAMUT
EDIT
RESET
COLOR GAMUTCUSTOM
65535 2900 0
2110 65535 0
0 1760 65535
2  access
1  select
2Select “OK”.
OKCANCEL COLOR GAMUT
RESET
1  select
2  set
 Chromaticity diagram      The RGB triangle representing current color space is shown.
COLOR GAMUT: CUSTOM
— NATIVE— CUSTOMy
x
White line: Color gamut...

37
On Onscreen display
Off All Aspect
Off Auto Setup
Off Studio mode
3D settings Function button assign 1
INT 3D Emitter
Signal Function button assign 2
On 3D Safety Precautions
Memory lock
Picture Pro les
Up to 16 combinations of picture adjustment values (in the PICTURE menu and ADVANCED SETTINGS) can be stored 
in the display memory as pro les and applied as needed, for a convenient way to enjoy your preferred picture settings. 
Note: 
If setting items (PITCURE menu and ADVANCED SETTINGS) are set...

38
Follow these steps to save picture adjustment values as pro les. 
Note:
When the settings are locked in “EXTENDED LIFE SETTINGS”, pro les cannot be saved.
Saving pro les
1
Specify the picture quality in the PICTURE menu 
and ADVANCED SETTINGS. (see page 31-36) 
2In the PICTURE menu, select “MEMORY SAVE”. 
MEMORY SAVE
MEMORY LOAD
MEMORY EDIT2  access
1  select
3Select a pro le name for saving the picture 
adjustment values. 
1. [
     ]
MEMORY1
MEMORY2 2. [
     ]
MEMORY3 3. [   1]
MEMORY4 4. [...

39
Picture Pro les
Load pro les and apply the picture adjustment values to the display as follows. 
Notes:
• Loaded pro les are stored in memory according to the selected input interface. (see page 19)
• When the settings are locked in “EXTENDED LIFE SETTINGS”, pro les cannot be loaded.

1In the PICTURE menu, select “MEMORY LOAD”.
MEMORY SAVE
MEMORY LOAD
MEMORY EDIT2  access
1  select
2Select the pro le to load. 
MEMORY12 12 .  [ 
  2] 1. [
     ]
MEMORY1
MEMORY2 2. [
   1]
2  set
1  select
Pro les...

40
Picture Pro les
Delete or rename pro les as follows. 

Note:
Locked pro les cannot be deleted. 
Note:
Locked pro les cannot be renamed. 
Editing pro les
1
In the PICTURE menu, select “MEMORY EDIT”. 
MEMORY SAVE
MEMORY LOAD
MEMORY EDIT2  access
1  select
2Select “MEMORY DELETE”. 
MEMORY NAME CHANGEMEMORY DELETE
2  set
1  select
3Select the pro le to delete. 
To delete all pro les, select “ALL DELETE”. 
1. [ 
    ]
MEMORY1
MEMORY2
ALL DELETE 2. [ 
    ]2  set
1  select
4Select “OK”. 
OKCANCEL...