Panasonic Th 103vx200 Operating Instructions

11
Connections
AC cord connection and  xing, cable  xing
TH-85VX200U
1 2 
 Note: 
 
Two  xing bands are supplied with this unit. In case of securing cables at three positions, please purchase it separately.
– How to Unfasten the AC cord
– Cable  xing bands
Secure any excess cables with bands as required. AC cord of this model is  xed and connected to the main unit. No AC cord needs to be connected.
Pass the attached cable 
 xing band through the 
clip as shown in the 
 gure. To secure cables...

12
Connections
1 2 
TH-103VX200U
To secure cables connected to Terminals, wrap the cable  xing band around them then 
pass the pointed end through the locking block, as shown in the  gure.
While ensuring there is suf cient slack in cables to minimize stress (especially 
in the power cord),  rmly bind all cables with the supplied  xing band.  Note: 
 
Two  xing bands are supplied with this unit. In case of securing cables at four positions, please purchase it separately.
– Cable  xing bandsSecure...

13
Video equipment connection
AUDIO OUT connection
Connections
COMPONENT/RGB IN
Component/RGB Video 
Input Terminal 
(see 
page 14)
AV IN (HDMI 1-4)
HDMI Input Terminal 
(see page 14)PC IN
PC Input Terminal
Connect to video 
terminal of PC or 
equipment with Y, 
P
B(CB) and PR(CR) 
output. 
(see page 15)
SERIAL
Control the Plasma Display 
by connecting to PC.
(see page 16)3D SHUTTER OUT
Connect the 3D IR 
TRANSMITTER 
(optional accessory).AUDIO OUT
Connect to sound 
equipment.
(see below)
LAN
Connect to...

14
Connections
HDMI connection
[Pin assignments and signal names]
1931
4218
Note: 
Additional equipment and HDMI cable shown are not supplied with this set.
Pin No.Signal NamePin No.Signal Name
1T.M.D.S Data2+11T.M.D.S Clock 
Shield
2T.M.D.S Data2 
Shield12T.M.D.S Clock-
3T.M.D.S Data2-13CEC
4T.M.D.S Data1+14Reserved 
(N.C. on device)
5T.M.D.S Data1 
Shield
6T.M.D.S Data1-15SCL
7T.M.D.S Data0+16SDA
8T.M.D.S Data0 
Shield17DDC/CEC 
Ground
9T.M.D.S Data0-18+5V Power
10T.M.D.S Clock+19Hot Plug Detect
HDMI...

Conversion adapter 
(if necessary)
Mini D-sub 15p
RGB
PC cableStereo mini plug (M3) Audio
Connect a cable which matches
the audio output terminal on the computer.
(Male)(Female)
COMPUTER
15
PC Input Terminals connection
Notes:
•  With regard to the typical PC input signals that are described in the applicable input signals list (see page 65), adjustment 
values such as for the standard picture positions and sizes have already been stored in this unit. You can add up to eight 
PC input signal types that...

COMPUTER
RS-232C Straight cable
D-sub 9p(Male)
(Female)
6789
1 3 4 52
16
The SERIAL terminal is used when the Plasma Display is controlled by a computer.
Note:
To use serial control for this unit, make sure to set the “CONTROL I/F SELECT” in the “NETWORK SETUP” menu to 
“RS-232C”. (see page 55)
Connections
SERIAL Terminals connection
Notes:
•  Use the RS-232C straight cable to connect the computer 
to the Plasma Display.
•  The computer shown is for example purposes only.
•  Additional equipment and...

Connecting the AC cord plug to the Plasma Display.
For TH-103VX200U
Fix the AC cord plug securely to the Plasma Display 
with the clamper. (see page 12) 
Remote Control
SensorPower IndicatorRight side surface
Main Power 
On / Off Switch
Connecting the plug to the Wall Outlet.
Note: 
For TH-103VX200U
When disconnecting the AC cord, be absolutely sure to 
disconnect the AC cord plug at the socket outlet  rst.
Press the Power switch on the Plasma Display to turn the 
set on: Power-On.
Power Indicator:...

18
OSD LANGUAGE
Power ON / OFF
English (UK)
Deutsch
Français
Italiano
ENGLISH (US)

OSD LANGUAGE
Español
Notes:
Once the language is set, this screen won’t be displayed  • 
when switching on the unit next time.
After the setting, language selection can be done from  • 
the SET UP menu. (see page 46)
When 3D images will be viewed by unspeci ed number of 
people or used for commercial applications, someone in 
authority should convey the following precautions.
These precautions should be followed...

19
Selecting the input signal
Press to select the input signal to be played back from the equipment 
which has been connected to the Plasma Display.
HDMI input terminals in HDMI 1 to HDMI 4.
Component or RGB input terminal in COMPONENT/RGB IN.*
PC input terminal in PC IN.
* “COMPONENT” may be displayed as “RGB” depending on the 
setting of “COMPONENT/RGB-IN SELECT”. (see page 44)
Input terminal in Terminal Board
When a dual input Terminal Board is installed, “SLOT INPUT A” and “SLOT INPUT B” are...

INPUT  MENU 
ENTER/ 
20
Up / Down button
When the menu screen is displayed:
“	” : press to move the cursor up 
“
” : press to move the cursor down
(see page 27)
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu 
screen will switch. (see page 27)
Normal Viewing PICTURE SETUP
SOUND POS. /SIZE
Main Power On / Off Switch Enter / Aspect button 
(see page 22, 27)
INPUT button
(INPUT signal selection)
(see page 19) Right side 
surface
Power Indicator
The Power Indicator will light.
• Power-OFF...