Panasonic Th 103pf12u Operating Instructions

21
MULTI PIP
Selecting the Target Screen for Operations
 
Each time this button is pressed, the target screen for operations changes.
PCINPUT1PCINPUT1
Main screen Sub screen
Main screen input mode Sub screen input mode
Operations on 
the main screenOperations on 
the sub screen
Notes:
•  When operations are performed for the sub screen, the sub screen audio is played.
•  If no operations are performed, the operation target returns to the main screen after about 5 seconds*. 
  You can also return to main...

2 
EXIT 
2 
1 
EXIT 
s1 
 s2 
 s3 
 s4 
INPUT MENU VOL
ENTER/
+/
-/
22
VOL button
MUTE button
SURROUND button
OFF TIMER button  POSITION / ACTION
button
VOL button [Unit]
Right side surface
Digital Zoom
This displays an enlargement of the designated part of the displayed image.
Select the area of the image to be enlarged.
Press on the enlargement location to select.
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
Notes:
•  When power goes OFF (including “Off Timer”...

23
On-Screen Menu Displays
Remote Control Unit
1Display the menu screen.
Press to select.
(Example: PICTURE menu)  
MENU Press several times.
Each time the MENU button is pressed, the 
menu screen will switch.
Normal Viewing PICTURE
SOUND POS. /SIZE
SET UP
2Select the item.
Select.
VOL
ENTER/
+/
-/
 Press.
 Select.25 
0 
0 
0 
5 
PICTURE 
NORMAL NORMALIZE STANDARD 
BRIGHTNESS 
SHARPNESS  PICTURE MENU 
COLOR  PICTURE 
TINT 
COLOR MANAGEMENTADVANCED SETTINGS
MEMORY SAVE
COLOR TEMPNORMAL
OFF
MEMORY LOAD...

1/2
SIGNAL
EXTENDED LIFE SETTINGS
SET UP
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
INPUT LABELSCREENSAVER
POWER SAVE
2/2 SET UP
MULTI DISPLAY SETUP
SET UP TIMER
PRESENT TIME SETUP
DISPLAY ORIENTATIONLANDSCAPE
MULTI PIP SETUPPORTRAIT SETUP
24
(see page 28, 29)
25
0
0
0
5
PICTURE 
NORMAL NORMALIZE STANDARD 
BRIGHTNESS 
SHARPNESS  PICTURE MENU 
COLOR  PICTURE 
TINT 
COLOR MANAGEMENTADVANCED SETTINGS
MEMORY SAVE
COLOR TEMPNORMAL
OFF...

0 
NORMAL NORMALIZE 
AUTO SETUP
POS. /SIZE 
V-POS 
0 
H-POS 
V-SIZE DOT CLOCK H-SIZE 
CLOCK PHASE 
1:1 PIXEL MODE OFF 
0 0 0 
0 
0 
0 
0 
NORMAL NORMALIZE 
POS. /SIZE 
V-POS  H-POS 0 
V-SIZE H-SIZE 1:1 PIXEL MODE OFF 
AUTO SETUP
25
Adjusting POS. /SIZE
1Press to display the POS. /SIZE menu.
Press to select the menu to adjust.
Press to adjust the menu.
Press to exit from adjust mode.
During “VIDEO (S VIDEO)”, “Digital”, 
“SDI” and “HDMI” input signal.
During “COMPONENT”, “RGB” 
and “PC” input signal....

26
H-POSAdjust the horizontal position.V-POSAdjust the vertical position.
H-SIZEAdjust the horizontal size.V-SIZEAdjust the vertical size.
DOT 
CLOCK(During “COMPONENT”, “RGB” and “PC” input signal)
Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, 
adjust so that any such noise is minimized.
CLOCK 
PHASE(During “COMPONENT”, “RGB” and “PC” input signal)
Eliminate the fl ickering and distortion.
OVER 
SCANTurn image over scan ON/OFF.
Confi gurable...

27
While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION 
(
  ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
Helpful Hint (  
 / NORMALIZE  
 Normalization)
Adjusting POS. /SIZE
1:1 PIXEL MODEAdjusts the display size when 1125i, 1125p or 1250i signal is input.
Notes:
•  Select ON when you would like to replay 1920 × 1080 input signal.
•  Applicable input signal;
  1125 (1080) /...

BLACK EXTENSION 
AGC  GAMMA  INPUT LEVEL 
ADVANCED SETTINGS 
NORMAL NORMALIZE 
W/B LOW B W/B HIGH R
W/B LOW R
W/B LOW G W/B HIGH G
W/B HIGH B0
0
2.2
0
0 0
0
0
0OFF
25 
0 
0 
0 
5 
PICTURE 
NORMAL NORMALIZE STANDARD 
BRIGHTNESS 
SHARPNESS  PICTURE MENU 
COLOR  PICTURE 
TINT 
COLOR MANAGEMENTADVANCED SETTINGS
COLOR TEMPNORMAL
OFF
28
PICTURE Adjustments
1
ADVANCED SETTINGS
Enables fi ne picture adjustment at a professional 
level (see next page).Press to enter Advanced 
Settings.
While the “PICTURE” menu is...

29
PICTURE Adjustments
ADVANCED SETTINGS
Notes:
•  “COLOR” and “TINT” settings cannot be 
adjusted for “RGB/PC” input signal.
•
  You can change the level of each function 
(PICTURE, BRIGHTNESS, COLOR, TINT, 
SHARPNESS) for each PICTURE MENU.
• The setting details for STANDARD, DYNAMIC 
and CINEMA respectively are memorized 
separately for each input terminal.
• The “TINT” setting can be adjusted for NTSC signal 
only during “VIDEO (S VIDEO)” input signal.
• In PICTURE, there is not a noticeable change...

18
0 
0 
0 
3
PICTURE 
NORMALNORMALIZECINEMA
BRIGHTNESS 
SHARPNESS  PICTURE MENU 
COLOR  PICTURE 
TINT 
COLOR MANAGEMENTADVANCED SETTINGS
MEMORY SAVE
COLOR TEMPNORMAL
OFF
MEMORY LOAD
MEMORY EDIT
25
0 
0 
0 
5
PICTURE 
NORMALNORMALIZECINEMA
BRIGHTNESS 
SHARPNESS  PICTURE MENU 
COLOR  PICTURE 
TINT 
COLOR MANAGEMENTADVANCED SETTINGS
COLOR TEMPNORMAL
OFF
25
0 
0 
0 
5
PICTURE 
NORMALNORMALIZECINEMA
BRIGHTNESS 
SHARPNESS  PICTURE MENU 
COLOR  PICTURE 
TINT 
COLOR MANAGEMENTADVANCED SETTINGS
COLOR TEMPNORMAL...