Panasonic Th 103pf12u Operating Instructions

Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
English
The illustration shown is an image.
TQBC2518
Operating Instructions 
High Defi nition Plasma Display
TH-103PF12UModel No.
 

2
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualifi ed service personnel.
The lightning flash with 
arrow-head within a triangle 
is in tend ed to tell the user 
that parts inside the product 
are a risk of electric shock 
to per sons.The exclamation point within 
a triangle is intended to 
tell the user that important 
operating and servicing 
instructions are in the papers 
with the ap pli ance.
CAUTION 
RISK OF...

3
Important Safety Instructions
  1) Read these instructions.
  2) Keep these instructions.
  3) Heed all warnings.
  4) Follow all instructions.
  5) Do not use this apparatus near water.
  6) Clean only with dry cloth.
  7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 
amplifi ers) that produce heat.
  9) Do not defeat the safety purpose...

4
Table of Contents Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment 
from your new Plasma Display.
To obtain maximum benefit from your set, please read these Instructions before making any adjustments, 
and retain them for future reference.
Retain your purchase receipt as well, and record the model number and serial number of your set in the 
space provided on the rear cover of these instructions.
Visit our Panasonic Web Site...

5
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will...

6
Safety Precautions
This Plasma Display is for use only with the following optional accessories. Use with any other type of optional 
accessories may cause instability which could result in the possibility of injury. 
(All of the following accessories are manufactured by Panasonic Corporation.)
   
CAUTION
 
 When using the Plasma Display
Do not bring your hands, face or objects close to the 
ventilation holes of the Plasma Display.
• 
Top of the Plasma Display is usually very hot due to the 
high...

7
Safety Precautions
WARNING 
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning 
cloth or a soft, lint-free cloth.
•  If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which 
neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface 
is dry.
•  Do not scratch or hit the surface of the panel with fi ngernails or...

+ 
+ 
-  - 
8
Accessories
Requires two AA batteries.
2.  Insert batteries - note correct 
polarity ( + and -).
   Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precautions:
1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3....

1 2 
SERIAL  PC    IN 
AUDIO 
AUDIO OUT
R L 
SLOT1SLOT3 
P R /C R /R P B /C B /B Y/G AUDIO R L COMPONENT/RGB IN 
R L 
SLOT2 
AUDIO OUT 

9
Connections
 Note: 
 Two fi xing bands are supplied with this unit. In case of securing cables at four positions, please purchase it separately.
– Cable fi xing bandsSecure any excess cables with bands as required.
Pass the attached cable 
fi xing band through the 
clip as shown in the 
fi gure. To secure cables connected to Terminals, wrap the cable fi xing band around...

AUDIO 
PC IN 
10
PC Input Terminals connection
Notes:
•  With regard to the typical PC input signals that are described in the applicable input signals list (see page 62), adjustment 
values such as for the standard picture positions and sizes have already been stored in this unit. You can add up to eight 
PC input signal types that are not included in the list.
•  Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning 
frequency of 48 to...