Panasonic System Controller Wv Cu161c Operating Instructions

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Model No.WV-CU161C
System Controller
Operating Instructions
System Controller WV-CU             C5 4
1
SHIFT
ESC
ALARMALARM
OPERATE
RESETCAMERA
SETUPSETUP
SLOWPROGRAM
SET PRESET HOME
WIDE
WIPERA
UX 1
AUX 2DEF
PATROL
PLAY
CLOSE NEAR
FAR
L
R UP
DOWN
OPEN TELE
ZOOM
IRIS FOCUS
PATROL STOPPATROL LEARN
AUTO
B/W
AUTO FOCUS
IRIS RESET
PROGRAM
PRESET
CAMERA
FUNCTION SUSPEND
2
06 3
9...

2
The serial number of this product may be found on the bot-
tom of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of your
purchase to aid identification in the event of theft.
Model No.
Serial No.
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
The lightning flash with arrowhead sym-
bol, within an equilateral triangle, is
intended to alert the user to the pres-
ence of...

3
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8) Do not use near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized...

4
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS  ........................................................................................................................................ 3
FEATURES .................................................................................................................................................................................... 5
PREFACE...

5
PREFACE
The WV-CU161C System Controller is designed for one-to-one use with a Combination Camera or WV-RC100/WV-RC150
Receiver that is provided with camera control functions. You can operate the pan/tilt head, lens and patrol play function from
the controller in normal operations. The camera setup upload/download and other functions are also available on the setup
menus. The distance between the camera and controller may vary depending on the system. The controller can transmit cam-
era control...

6
PRECAUTIONS
• Refer all work related to the installation of this
product to qualified service personnel or system
installers.
• Do not block the ventilation opening or slots on the
cover.
Place the appliance at least 5 cm (2 inches) away from
the wall to prevent the appliance from heating up.
• Do not drop metallic parts through the slots as this
could permanently damage the appliance.
Turn the power off immediately and refer servicing to
qualified service personnel if any foreign parts fall
through...

7
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Front View
qOperate Indicator (OPERATE)
Lights up while the System Controller power is on.
wAlarm Indicator (ALARM)
Blinks when an alarm is activated.
The blink changes to a steady light when the alarm is
automatically reset.
Press the ALARM RESET button to turn the indicator off.
eAuto Panning/Black and White Selection/Patrol Stop
Button (AUTO/B/W/PATROL STOP)
AUTO:Pressing this button will activate the auto pan-
ning function of cameras that are provided...

8
tWiper/Auxiliary 1 Button (WIPER/AUX1)
Pressing this button will turn the housing wipers on or
off for cameras provided with this function. Pressing this
while the SHIFT indicator is lit will turn on or off the
AUX1 function controlling accessories that are connect-
ed to the camera or the specified receiver.
The indicator next to the respective button is lit while
the wiper or AUX1 operates.
yDefroster/Auxiliary 2 Button (DEF/AUX2)
Pressing this button will turn the housing defroster on or
off for...

9
Rear View
POWER
OFF
SIGNAL GND
ON CAMERA
IN RS485 ALARM DATA
TERMVIDEO
OUTRESET OUT
ALARM IN RECOVER IN ALARM OUT
ALARM INLINECOAX
RS485 4
2 ON
OFF
1 2 G 3 4R TA B A B G
rtyuio!0!1eqw
qAlarm Switch 
This switch is used to specify the functions for the 5-pin
terminal adjacent to the switch. When the switch is set
to the upper position, the terminals supply and accept
the alarm related signals with a Time Lapse VCR. When
the switch is in the lower position, the terminals accept
alarm inputs 1, 2, 3 and...

• Installation should be performed by qualified service personnel or system installers according to the following instruc-
tions.
• Disconnect the power cord from the service outlet before installation.
10
INSTALLATION
Mounting in the Rack
1. Remove the Connector Panel and Bottom Cover from
the controller by removing the four screws.
2. Mount the Connector Panel onto the bottom by using
the two screws that were removed above.
3. Mount the Bottom Cover onto the rear by using the two
screws that were...