Panasonic System Controller Wv Cu161 Operating Instructions

21
ERROR1
(2) Upload Setting
1. Display the PRESET DATA LOAD menu.
2. Select a camera number between CAM1 and CAM8 by
moving the joystick up or down.
3. Press the PRESET/SET/PROGRAM PRESET button.
4. The camera number and upload menu appear on the
monitor as shown below.
5. Select UP LOAD by moving the joystick up or down.
6. Press the PRESET/SET/PROGRAM PRESET button.
Uploading starts.
   CAM1:
    DOWN LOAD
    UP   LOAD
    DATA TITLE
    END 
LOADINGBlinking
7. While uploading, the word LOADING...

22
9. To return to the preset data menu, press the
HOME/ESC button after completing the data title set-
ting. 
To replace a specific character
1. Use the joystick to shift the cursor to the selected char-
acter area.
2. Move the cursor to the character to be replaced by
moving the joystick right or left.
3. Move to shift the cursor to the character area by moving
the joystick up or down, and move the cursor to the
desired character by moving the joystick up, down,
right or left.
4. Press...

23
(4) Parity Check Setting
This item lets you set the parity bit for RS-485 communica-
tion.
1. Display the COMMUNICATION menu.
2. Select PARITY CHECK by moving the joystick up or
down.
3. Select NONE, EVEN or ODD for parity check by moving
the joystick to the right or left.
The initial factory setting is NONE.
Note:This setting must be compatible with the peripherals
connected.
(5) Stop Bit Setting
This item lets you set the number of stop bits for RS-485
communication.
1. Display the COMMUNICATION...

24
CAMERA CONTROL FUNCTIONS
It is necessary to setup the camera before using the cam-
era control functions. For further information, refer to the
Operating Instructions for the respective combination cam-
era (See page 30). You can also set it up from Camera
Setup menu if you operate a system.
Pan/Tilt Control
The following function is available with a combination cam-
era or pan/tilt head.
Move the pan/tilt head in the desired direction using the
joystick.
The camera can be moved in eight directions....

25
Operation of Combination Camera
It is necessary to setup the combination camera before
operating it. For further setup information, refer to the
Operating Instructions for the combination camera (See
page 30). You can also set it up from the Camera Setup
menu if you operate a system.
Changing to Picture at Preset Position
The following function is available only with cameras pro-
vided with the preset function.
The preset function makes the combination camera move
to the programmed preset position....

26
Changing from Color to Black and White
Picture
The following function is available with cameras provided
with the color-black and white switching function specified
for this operation.
1. Press the AUTO/B/W/PATROL STOPbutton, after
pressing the SHIFT button, to change from color to
black and white picture. The black and white picture
appears on the monitor.
Camera Patrol Function
The following function is available with combination cam-
eras provided with the camera patrol function.
The camera...

27
3. To cancel the electronic shutter function, press numeric
buttons 1, 7and 2.
4. To increase electronic shutter speed, press numeric
buttons 1, 7and 3.
5. To decrease electronic shutter speed, press numeric
buttons 1, 7and 4.
•Automatic Gain Control
The following function is available only with cameras
provided with the AGC feature.
1. Press numeric buttons 1, 7and 5.2. Press the SLOW/CAMERA FUNCTIONbutton after
pressing the SHIFTbutton.
3. To cancel the electronic sensitivity function, press
numeric...

28
External Device Control
Auxiliary Control
The following function is available only in cases where
external devices are connected to the receiver or the cam-
era.
1. Press the WIPER/AUX1or DEF/AUX2button after
pressing the SHIFTbutton, to enable or the user switch
on the receiver. 
The AUX1or AUX2indicator lights up.
Camera Housing Control
Wiper Control
The following function is available only with the cameras
whose housing is provided with the wiper control function.
1. Press the WIPER/AUX1button...

29
ALARM CONTROL FUNCTIONS
When the WV-CU161 receives an alarm signal from a cam-
era site, an alarm is activated. The WV-CU161 can handle
the following alarms.
Camera Site Alarm
Coaxial Multiplex Communication:
Alarm is multiplexed with video signals from the cam-
era.
RS-485 Site Communication
Alarm is transmitted via RS-485.
Terminal Alarm
Alarm is input via the alarm input terminal on the rear
panel from external devices such as a sensor.
Alarm Operation
When the alarm signal is supplied in the...

30
CAMERA SETUP
You can use the WV-CU161 to setup the camera from the
Camera Setup menu.
For further information, refer to the Operating Instructions
for the individual combination cameras.
Camera Setup
1. Press the CAMERA SETUP/SETUP/PROGRAMbutton
for 2 seconds or more to access the Camera Setup
menu. The CAMERA SETUPindicator lights up.
CAMERA
SETUP
SETUP
PROGRAM
5. Press the CAMERA SETUP/SETUP/PROGRAMbutton
for 2 seconds or more to complete the Camera Setup. 2. Select an item and parameter by...