Panasonic Sv Av50 Operating Instructions Manual
Have a look at the manual Panasonic Sv Av50 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 26
26
Voice Recording
(Voice Recording Function)
You can record voice data on the Memory Card.
1Set the Record/Play mode Switch to [ ]
and set the operation mode to [VOICE].
2Press the Recording Start/Stop Button.
≥Recording starts.
3Speak into the built-in microphone 1 of
this SD Video Camera.
≥While recording voice, press the Recording Start/
Stop Button to stop recording.
≥The LCD Monitor will shut off approx. 5 seconds
after starting to record. This is not a malfunction
but a normal sequence in...](http://img.usermanuals.tech/thumb/58/66049/w64_sv-av50_en_om_d-25.png "Page 26
26
Voice Recording
(Voice Recording Function)
You can record voice data on the Memory Card.
1Set the Record/Play mode Switch to [ ]
and set the operation mode to [VOICE].
2Press the Recording Start/Stop Button.
≥Recording starts.
3Speak into the built-in microphone 1 of
this SD Video Camera.
≥While recording voice, press the Recording Start/
Stop Button to stop recording.
≥The LCD Monitor will shut off approx. 5 seconds
after starting to record. This is not a malfunction
but a normal sequence in...")
![Page 27
27
Listening to Voice
Recordings (Voice Playback)
Plays back the voice files recorded by the SD Video
Camera.
1Set the Record/Play mode Switch to [ ]
and set the operation mode to [VOICE].
≥Voice files recorded on the Memory Card are
displayed in the form of a list.
2Roll the Jog Ball UP or DOWN to select a
desired file.
3Press the Jog Ball.
≥A voice file is played back.
≥In approx. 5 seconds after playing back, the
LCD Monitor will turn off.
≥When stopping playback, the file list reverts and
the...](http://img.usermanuals.tech/thumb/58/66049/w64_sv-av50_en_om_d-26.png "Page 27
27
Listening to Voice
Recordings (Voice Playback)
Plays back the voice files recorded by the SD Video
Camera.
1Set the Record/Play mode Switch to [ ]
and set the operation mode to [VOICE].
≥Voice files recorded on the Memory Card are
displayed in the form of a list.
2Roll the Jog Ball UP or DOWN to select a
desired file.
3Press the Jog Ball.
≥A voice file is played back.
≥In approx. 5 seconds after playing back, the
LCD Monitor will turn off.
≥When stopping playback, the file list reverts and
the...")
![Page 28
28
Listening to Music
(Audio Playback)
This unit is capable of playing MPEG-2 AAC and MP3
data files. The supplied program, SD-Jukebox Ver.4
(supplied accessory), must be used to load these files
onto the SD Memory Card. Files that are simply copied
to the SD Memory Card may not playback properly or
at all. Please refer to page 42 for additional
information.
1Set the Record/Play mode Switch to [ ]
and set the operation mode to [AUDIO].
≥Music files recorded on the Memory Card are
displayed in...](http://img.usermanuals.tech/thumb/58/66049/w64_sv-av50_en_om_d-27.png "Page 28
28
Listening to Music
(Audio Playback)
This unit is capable of playing MPEG-2 AAC and MP3
data files. The supplied program, SD-Jukebox Ver.4
(supplied accessory), must be used to load these files
onto the SD Memory Card. Files that are simply copied
to the SD Memory Card may not playback properly or
at all. Please refer to page 42 for additional
information.
1Set the Record/Play mode Switch to [ ]
and set the operation mode to [AUDIO].
≥Music files recorded on the Memory Card are
displayed in...")
![Page 29
29
ªSelecting a Playlist
Playlists set using the SD-Jukebox Ver.4 can be
played back.
Select a desired playlist in [Playlist] of the menu.
1
ªSelecting a desired Sound Quality
Music quality can be selected with the supplied
Remote Controller. (Use earphones, or the audio
cannot be heard.)
Press the [EQ] button on the Remote Controller.
≥Every time the [EQ] Button is pressed, the Sound
quality changes as followed.
No display: Normal tone
[S-XBS]: Punchy super bass sound
[TRAIN]: Sound friendly to...](http://img.usermanuals.tech/thumb/58/66049/w64_sv-av50_en_om_d-28.png "Page 29
29
ªSelecting a Playlist
Playlists set using the SD-Jukebox Ver.4 can be
played back.
Select a desired playlist in [Playlist] of the menu.
1
ªSelecting a desired Sound Quality
Music quality can be selected with the supplied
Remote Controller. (Use earphones, or the audio
cannot be heard.)
Press the [EQ] button on the Remote Controller.
≥Every time the [EQ] Button is pressed, the Sound
quality changes as followed.
No display: Normal tone
[S-XBS]: Punchy super bass sound
[TRAIN]: Sound friendly to...")
![Page 30
30
Using the Remote Controller/
Earphones
1
Connect the Remote Controller to the
[ ] terminal of the SD Video Camera.
2Plug the Earphone terminal into the
connected Remote Controller if
necessary.
ªOperating the Remote Controller
1[sVOLr]: Adjusts the Volume. (Digital zoom
operation cannot be performed.)
2[1/_]/[¥]: Records/Stops recording images or
sounds in the [ ] mode.
Plays/Stops playing the file in the
[ ] mode.
3[9]: Selects the next file or fast-forwards
the files.
4[:]: Selects the...](http://img.usermanuals.tech/thumb/58/66049/w64_sv-av50_en_om_d-29.png "Page 30
30
Using the Remote Controller/
Earphones
1
Connect the Remote Controller to the
[ ] terminal of the SD Video Camera.
2Plug the Earphone terminal into the
connected Remote Controller if
necessary.
ªOperating the Remote Controller
1[sVOLr]: Adjusts the Volume. (Digital zoom
operation cannot be performed.)
2[1/_]/[¥]: Records/Stops recording images or
sounds in the [ ] mode.
Plays/Stops playing the file in the
[ ] mode.
3[9]: Selects the next file or fast-forwards
the files.
4[:]: Selects the...")
![Page 31
31
Advanced Functions
Digital Zoom Function
1
Set the Record/Play mode Switch to [ ]
and set the operation mode to [PICTURE]
or [MPEG4].
2Rotate the Zoom/Volume Lever toward [T]
or [W].
≥Picture is enlarged by 1 step by rotating the
Zoom/Volume Lever toward [T] up to 3 steps
(Maximum: 2.5k) and it is reduced by 1 step by
rotating the Zoom/Volume Lever toward [W].
(Minimum: 1k)
≥In the following cases, the Zoom magnification
returns to 1k.
-Turning the power off.
-Setting the Record/Play Switch to...](http://img.usermanuals.tech/thumb/58/66049/w64_sv-av50_en_om_d-30.png "Page 31
31
Advanced Functions
Digital Zoom Function
1
Set the Record/Play mode Switch to [ ]
and set the operation mode to [PICTURE]
or [MPEG4].
2Rotate the Zoom/Volume Lever toward [T]
or [W].
≥Picture is enlarged by 1 step by rotating the
Zoom/Volume Lever toward [T] up to 3 steps
(Maximum: 2.5k) and it is reduced by 1 step by
rotating the Zoom/Volume Lever toward [W].
(Minimum: 1k)
≥In the following cases, the Zoom magnification
returns to 1k.
-Turning the power off.
-Setting the Record/Play Switch to...")
![Page 32
32
Backlight Compensation
Function
This prevents a recording subject from being recorded
too dark in backlight. (Backlight is the light that shines
from behind a recording subject.)
1Set the Record/Play mode Switch to [ ]
and set the operation mode to [PICTURE]
or [MPEG4].
2Press the Jog Ball 1 second or more.
≥The editing menu screen appears.
3Roll the Jog Ball UP or DOWN until
[Back light] is displayed.
4Roll the Jog Ball LEFT or RIGHT to select
[On].
5Press the Jog Ball.
≥The [ª] Indication is...](http://img.usermanuals.tech/thumb/58/66049/w64_sv-av50_en_om_d-31.png "Page 32
32
Backlight Compensation
Function
This prevents a recording subject from being recorded
too dark in backlight. (Backlight is the light that shines
from behind a recording subject.)
1Set the Record/Play mode Switch to [ ]
and set the operation mode to [PICTURE]
or [MPEG4].
2Press the Jog Ball 1 second or more.
≥The editing menu screen appears.
3Roll the Jog Ball UP or DOWN until
[Back light] is displayed.
4Roll the Jog Ball LEFT or RIGHT to select
[On].
5Press the Jog Ball.
≥The [ª] Indication is...")
![Page 33
33
Adjusting White Balance
The SD Video Camera adjusts White Balance
automatically. However, depending on the scene or
light condition, the Automatic White Balance may not
be able to bring out natural colors. In such cases, the
white balance can be adjusted manually.
1Set the Record/Play mode Switch to [ ]
and set the operation mode to [PICTURE]
or [MPEG4].
2Press the Jog Ball 1 second or more.
≥The editing menu screen appears.
3Roll the Jog Ball UP or DOWN until
[White balance] is displayed....](http://img.usermanuals.tech/thumb/58/66049/w64_sv-av50_en_om_d-32.png "Page 33
33
Adjusting White Balance
The SD Video Camera adjusts White Balance
automatically. However, depending on the scene or
light condition, the Automatic White Balance may not
be able to bring out natural colors. In such cases, the
white balance can be adjusted manually.
1Set the Record/Play mode Switch to [ ]
and set the operation mode to [PICTURE]
or [MPEG4].
2Press the Jog Ball 1 second or more.
≥The editing menu screen appears.
3Roll the Jog Ball UP or DOWN until
[White balance] is displayed....")
![Page 34
34
Erasing the Files Recorded
on a Memor y Card
Using SD Video Camera, you can erase files recorded
on the Memory Card. After files are erased, they
cannot be restored.
1Play back the file to be erased or pause it.
(
l23, 25, 27)
2Press the [MENU] Button.
≥The editing menu screen appears.
3Roll the Jog Ball UP or DOWN until
[Erase card file] is displayed.
4Roll the Jog Ball LEFT or RIGHT to select
[Yes].
5Press the Jog Ball.
≥Erased files cannot be restored.
≥The selected file is erased from the...](http://img.usermanuals.tech/thumb/58/66049/w64_sv-av50_en_om_d-33.png "Page 34
34
Erasing the Files Recorded
on a Memor y Card
Using SD Video Camera, you can erase files recorded
on the Memory Card. After files are erased, they
cannot be restored.
1Play back the file to be erased or pause it.
(
l23, 25, 27)
2Press the [MENU] Button.
≥The editing menu screen appears.
3Roll the Jog Ball UP or DOWN until
[Erase card file] is displayed.
4Roll the Jog Ball LEFT or RIGHT to select
[Yes].
5Press the Jog Ball.
≥Erased files cannot be restored.
≥The selected file is erased from the...")
![Page 35
35
Protecting Files
(File Protection)
Precious files recorded on the Memory Card can be
locked to prevent accidental erasure.
1Play back the file to be locked or pause it.
(
l23, 25, 27)
2Press the [MENU] Button.
≥The editing menu screen appears.
3Roll the Jog Ball UP or DOWN until [Lock/
Unlock] is displayed.
4Roll the Jog Ball LEFT or RIGHT to select
[Lock].
5Press the Jog Ball.
≥The selected file is locked and the [ ]
Indication is attached to the selected files.
ªTo Release the File Protection...](http://img.usermanuals.tech/thumb/58/66049/w64_sv-av50_en_om_d-34.png "Page 35
35
Protecting Files
(File Protection)
Precious files recorded on the Memory Card can be
locked to prevent accidental erasure.
1Play back the file to be locked or pause it.
(
l23, 25, 27)
2Press the [MENU] Button.
≥The editing menu screen appears.
3Roll the Jog Ball UP or DOWN until [Lock/
Unlock] is displayed.
4Roll the Jog Ball LEFT or RIGHT to select
[Lock].
5Press the Jog Ball.
≥The selected file is locked and the [ ]
Indication is attached to the selected files.
ªTo Release the File Protection...")
![Page 36
36
Writing Printing Data on a
Memor y Card (DPOF Setting)
DPOF Setting Printing data (DPOF Setting), such as
the number of images to be printed, can be written to
the Memory Card.
1Play back a still picture to be DPOF-set.
(
l23)
2Press the [MENU] Button.
≥The editing menu screen appears.
3Roll the Jog Ball UP or DOWN until
[DPOF print] is displayed.
4Roll the Jog Ball LEFT or RIGHT to set the
number to be printed.
5Press the Jog Ball.
≥When DPOF setting is set to 1 or more, the [ ]
indication...](http://img.usermanuals.tech/thumb/58/66049/w64_sv-av50_en_om_d-35.png "Page 36
36
Writing Printing Data on a
Memor y Card (DPOF Setting)
DPOF Setting Printing data (DPOF Setting), such as
the number of images to be printed, can be written to
the Memory Card.
1Play back a still picture to be DPOF-set.
(
l23)
2Press the [MENU] Button.
≥The editing menu screen appears.
3Roll the Jog Ball UP or DOWN until
[DPOF print] is displayed.
4Roll the Jog Ball LEFT or RIGHT to set the
number to be printed.
5Press the Jog Ball.
≥When DPOF setting is set to 1 or more, the [ ]
indication...")
31 Advanced Functions Digital Zoom Function 1 Set the Record/Play mode Switch to [ ] and set the operation mode to [PICTURE] or [MPEG4]. 2Rotate the Zoom/Volume Lever toward [T] or [W]. ≥Picture is enlarged by 1 step by rotating the Zoom/Volume Lever toward [T] up to 3 steps (Maximum: 2.5k) and it is reduced by 1 step by rotating the Zoom/Volume Lever toward [W]. (Minimum: 1k) ≥In the following cases, the Zoom magnification returns to 1k. -Turning the power off. -Setting the Record/Play Switch to [ ]. Night View Function This function allows you to record brighter color images in a dark place. 1Set the Record/Play mode Switch to [ ] and set the operation mode [MPEG4]. 2Press the [NIGHT VIEW] Button. ≥The indication appears and the images become brighter. ≥Press the [NIGHT VIEW] Button again to resume Normal Recording mode. ≥Night View Function works by extending the signal storage (exposure) time of the CCD image sensor. It is normal for some picture degradation to occur – this is not a malfunction. This may include: -Motion playback may appear as if frames are dropped. -“Points” of light not normally visible in brightly lighted situations may be visible. ≥In the following cases, the Night View function is released. -Turning the power off. -Setting the Record/Play Switch to [ ]. -Setting the operation mode to [VOICE]. -Setting the [Input select] to [Line]. 2Ô × Ô × ;00. MODEMODE1 1MODEMODE ÎÉÇÈÔ ÖÉÅ×2 AV50PP_ENG.book 31 ページ ２００３年１１月２６日 水曜日 午後３時１７分
32 Backlight Compensation Function This prevents a recording subject from being recorded too dark in backlight. (Backlight is the light that shines from behind a recording subject.) 1Set the Record/Play mode Switch to [ ] and set the operation mode to [PICTURE] or [MPEG4]. 2Press the Jog Ball 1 second or more. ≥The editing menu screen appears. 3Roll the Jog Ball UP or DOWN until [Back light] is displayed. 4Roll the Jog Ball LEFT or RIGHT to select [On]. 5Press the Jog Ball. ≥The [ª] Indication is displayed. ≥Set the [Back light] to [Off] to resume Normal Recording mode. ≥If left unused for approx. 3 seconds, the editing menu screen will automatically disappear. ≥In the following cases, the Backlight Compensation function is released. -Turning the power off. -Setting the Record/Play Switch to [ ]. -Setting the [Input select] to [Line]. 2 1 3,4 5 MODEMODE 1HH1HH$CEMNKIJV$CEMNKIJV Ô × Ô × Ô × AV50PP_ENG.book 32 ページ ２００３年１１月２６日 水曜日 午後３時１７分
33 Adjusting White Balance The SD Video Camera adjusts White Balance automatically. However, depending on the scene or light condition, the Automatic White Balance may not be able to bring out natural colors. In such cases, the white balance can be adjusted manually. 1Set the Record/Play mode Switch to [ ] and set the operation mode to [PICTURE] or [MPEG4]. 2Press the Jog Ball 1 second or more. ≥The editing menu screen appears. 3Roll the Jog Ball UP or DOWN until [White balance] is displayed. 4Point the SD Video Camera at a full- screen white subject (e.g. white paper). 5Roll the Jog Ball LEFT or RIGHT to select [ 1Set mode]. 6Press the Jog Ball and the [1] indication is displayed. ≥Set the [White balance] to [Auto] to resume automatic adjustment. ≥If left unused for approx. 3 seconds, the editing menu screen will automatically disappear. ≥In the following cases, the White Balance Adjustment resumes automatic adjustment -Turning the power off. -Setting the Record/Play Switch to [ ]. -Setting the [Input select] to [Line]. 2 1 3 #WVQ#WVQ9JKVGDCNCPEG9JKVGDCNCPEG9$9$ 4 MODEMODE 5,6 Ô × Ô × Ô × AV50PP_ENG.book 33 ページ ２００３年１１月２６日 水曜日 午後３時１７分
34 Erasing the Files Recorded on a Memor y Card Using SD Video Camera, you can erase files recorded on the Memory Card. After files are erased, they cannot be restored. 1Play back the file to be erased or pause it. ( l23, 25, 27) 2Press the [MENU] Button. ≥The editing menu screen appears. 3Roll the Jog Ball UP or DOWN until [Erase card file] is displayed. 4Roll the Jog Ball LEFT or RIGHT to select [Yes]. 5Press the Jog Ball. ≥Erased files cannot be restored. ≥The selected file is erased from the Memory Card. ≥If [No] is selected, the file selection is canceled. ≥After erasing the file, the display reverts to the index picture screen. ªTo Erase All Files 1Set the Record/Play mode Switch to [ ] and set to the desired operation mode. 2Press the [MENU] Button. 3Select [Card editing] and press the Jog Ball. 4Select [Erase all files] and press the Jog Ball. ≥A verification message appears. 5Select [Yes] and press the Jog Ball. :+6:+6 %#4&&+6+0)%#4&&+6+0) &21(TGUGVVKPI&21(TGUGVVKPI TCUGCNNHKNGUTCUGCNNHKNGU .QEM7PNQEM.QEM7PNQEM s &21(EJGEMKPI&21(EJGEMKPI 2 0Q0QTCUGECTFHKNGTCUGECTFHKNG 1 3,4,5 MENUMENU 2 1 3,4,5MENUMENU MODEMODE Ô × Ô × AV50PP_ENG.book 34 ページ ２００３年１１月２６日 水曜日 午後３時１７分
35 Protecting Files (File Protection) Precious files recorded on the Memory Card can be locked to prevent accidental erasure. 1Play back the file to be locked or pause it. ( l23, 25, 27) 2Press the [MENU] Button. ≥The editing menu screen appears. 3Roll the Jog Ball UP or DOWN until [Lock/ Unlock] is displayed. 4Roll the Jog Ball LEFT or RIGHT to select [Lock]. 5Press the Jog Ball. ≥The selected file is locked and the [ ] Indication is attached to the selected files. ªTo Release the File Protection Select [Unlock] in Step 4 above. ≥The [ ] Indication disappears. ªTo Lock All Files 1Set the Record/Play mode Switch to [ ] and set to the desired operation mode. 2Press the [MENU] Button. 3Select [Card editing] and press the Jog Ball. 4Select [Lock/Unlock] and press the Jog Ball. ≥A verification message appears. 5Select [Lock] and press the Jog Ball. ≥To unlock all files, select [Unlock] and press the Jog Ball. 2 1 3,4,5MENUMENU 2 1 3,4,5 Ô × Ô × MENUMENU :+6:+6 %#4&&+6+0)%#4&&+6+0) &21(TGUGVVKPI&21(TGUGVVKPI TCUGCNNHKNGUTCUGCNNHKNGU .QEM7PNQEM.QEM7PNQEM s &21(EJGEMKPI&21(EJGEMKPI .QEM.QEM.QEM7PNQEM.QEM7PNQEM MODEMODE AV50PP_ENG.book 35 ページ ２００３年１１月２６日 水曜日 午後３時１７分
36 Writing Printing Data on a Memor y Card (DPOF Setting) DPOF Setting Printing data (DPOF Setting), such as the number of images to be printed, can be written to the Memory Card. 1Play back a still picture to be DPOF-set. ( l23) 2Press the [MENU] Button. ≥The editing menu screen appears. 3Roll the Jog Ball UP or DOWN until [DPOF print] is displayed. 4Roll the Jog Ball LEFT or RIGHT to set the number to be printed. 5Press the Jog Ball. ≥When DPOF setting is set to 1 or more, the [ ] indication appears. ªTo Release All the DPOF Settings 1Set the Record/Play mode Switch to [ ] and set the operation mode to [PICTURE]. 2Press the [MENU] Button. 3Select [Card editing] and press the Jog Ball. 4Select [DPOF resetting] and press the Jog Ball. 1 ≥A verification message appears. 5Select [Yes] and press the Jog Ball. ªTo Check the DPOF Settings in Slide Show Select [DPOF checking] in Step 4 in “To Release All the DPOF settings” above and press the Jog Ball. 2 ≥DPOF-set images are displayed one by one for approx. 3 seconds each. 2 1 3,4,5MENUMENU 2 1 Ô × Ô × MENUMENU %#4&&+6+0)%#4&&+6+0) &21(TGUGVVKPI&21(TGUGVVKPI TCUGCNNHKNGUTCUGCNNHKNGU .QEM7PNQEM.QEM7PNQEM s &21(EJGEMKPI&21(EJGEMKPI &21(RTKPV&21(RTKPV 3,4,5 %#4&&+6+0)%#4&&+6+0) &21(TGUGVVKPI&21(TGUGVVKPI TCUGCNNHKNGUTCUGCNNHKNGU .QEM7PNQEM.QEM7PNQEM s &21(EJGEMKPI&21(EJGEMKPI 2 1 MODEMODE AV50PP_ENG.book 36 ページ ２００３年１１月２６日 水曜日 午後３時１７分
37 Playing Back Still Pictures One by One (P. Slide Show) Plays back still pictures based on the Slide show data set by SD-MovieStage Ver.2.5 (supplied). 1Set the Record/Play mode Switch to [ ] and set the operation mode to [PICTURE]. 2Press the [MENU] Button. 3Select the [P. Slide show] and press the Jog Ball. ≥P. Slide show starts. ≥Pictures set with SD-MovieStage are sequentially displayed, each for approx. 3 seconds, and the P. Slide show stops. ≥Press the Jog Ball to stop P. Slide show. ≥Roll the Jog Ball DOWN to pause P. Slide show. (Roll the Jog Ball UP to resume playback.) ªCreating P. Slide Show Data with SD-MovieStage Ver.2.5 1Install the SD-MovieStage Ver.2.5 on your personal computer. (l46) 2Insert the Memory Card into the SD Video Camera and connect to the personal computer. 3Start the SD-MovieStage Ver.2.5. (Please refer to the PDF-based instructions of the SD-MovieStage Ver.2.5 for further information.) :+6:+6 2.#;/072.#;/07 &KURNC[UGVWR&KURNC[UGVWR %CTFGFKVKPI%CTFGFKVKPI 25NKFGUJQY25NKFGUJQY 5GVWR5GVWR ssssss 1 Ô × 2 3MENUMENU MODEMODE AV50PP_ENG.book 37 ページ ２００３年１１月２６日 水曜日 午後３時１７分
38 For matting the Memor y Card If a Memory Card becomes unreadable by the SD Video Camera, formatting it may make it reusable. Formatting erases all the data recorded on the Memory Card. 1Set the Record/Play mode Switch to []. 2Press the [MENU] Button. 3Select [Setup] and press the Jog Ball. 4Select [Format card] and press the Jog Ball. ≥A verification message appears. 5Select [Yes] and press the Jog Ball to be formatted. ≥Formatting is carried out. ≥If [No] is selected, the Memory Card format is canceled. ≥Normally, it is not necessary to format the Memory Card.:+6:+6 4%/074%/07ZVTCHKPGZVTCHKPG &KURNC[UGVWR&KURNC[UGVWR /2)OQFG/2)OQFG 5GVWR5GVWR s #WVQTGEQTFKPIUGVWR#WVQTGEQTFKPIUGVWR 1 2 3 4 Ô × Ô ×5 MENUMENU :+6:+6 567256721P1P %COGTC%COGTC (QTOCVECTF(QTOCVECTF $GGR$GGR +PRWVUGNGEV+PRWVUGNGEV %NQEMUGV%NQEMUGV #WVQRQYGTQP#WVQRQYGTQP1HH1HH Ô × AV50PP_ENG.book 38 ページ ２００３年１１月２６日 水曜日 午後３時１７分
39 Playing Back on an exter nal device By connecting the SD Video Camera in USB Cradle with an external device, the recorded scenes can be played back on an external device such as a TV or Audio device. 1Turn the SD Video Camera off and put in the USB Cradle. (l10) 2Connect the [AV IN/OUT] terminal of the USB Cradle to the AV Input Sockets of the external device 2 using supplied AV Cable 1. ≥Turn off the SD Video Camera before connecting the AV Cable. 3Turn on the SD Video Camera and set the Record/Play mode Switch to [ ] and then, set the operation mode to be desired. 4Press the [MENU] Button and then, select [Setup] and press the Jog Ball. 5Set [Output select] to [Line] and press the [MENU] Button. 6Select the file to be played back and press the Jog Ball. ≥In the connection described in this item, the speaker or the stereo earphones of this Device cannot be used. 3 56725672 1HH1HH .KPG.KPG é8 $GGR$GGR 1WVRWVUGNGEV1WVRWVUGNGEV s#WVQRQYGTQP#WVQRQYGTQP1HH1HH 4,5Ô × 6Ô × MENUMENU MODEMODE AV IN/OUT 2 1 2 AV50PP_ENG.book 39 ページ ２００３年１１月２６日 水曜日 午後３時１７分
40 Recording Pictures supplied from an external device 1 Turn the SD Video Camera off and put in the USB Cradle. (l10) 2Connect the [AV IN/OUT] terminal of the USB Cradle to the AV Output Sockets of the external device 2 using supplied AV Cable 1. 3Turn on the SD Video Camera and set the Record/Play mode Switch to [ ] and then, set the operation mode to [PICTURE] or [MPEG4]. 4Press the [MENU] Button and then, select [Setup] and press the Jog Ball. 5Set [Input select] to [Line] and press the [MENU] Button. ≥The [ ] indication appears. 6Select desired image quality. (l22, 24) 7Press the [MENU] Button. 8Set up the external device. ≥Confirm that the image or sound signal is input into the SD Video Camera. ≥In the [MPEG4] mode, when rotating the Zoom Lever to [W], you can mute the sound from the speaker. (The volume of the sound cannot be changed. You can output the sound again when rotating the Zoom Lever to [T].) 9Press the Recording Start/Stop Button. ≥Recording starts. ≥When the moving picture is being recorded, press the Recording Start/Stop Button again to stop recording. ≥While this camera can record audio from an external device, the audio connection should only be connected to the “line” output of the external device. This is normally an “RCA” type of connector. Do not attempt to connect audio directly from the speaker output of any device. Doing so will cause serious damage to this device. 3 7 56725672 1HH1HH .KPG.KPG é8 $GGR$GGR +PRWVUGNGEV+PRWVUGNGEV s#WVQRQYGTQP#WVQRQYGTQP1HH1HH MENUMENU 5,6Ô × 9 4 MENUMENU MODEMODE MENUMENU Ô × DC IN 4.8V AV IN/OUT 2 1 2 AV50PP_ENG.book 40 ページ ２００３年１１月２６日 水曜日 午後３時１７分