Panasonic Sv Av100 Operating Instructions Manual

							NN 25White Balance Sensor (l36)
26Battery Compartment (l12)
27Battery Compartment Cover (l12)
28DC Input Socket [DC IN 4.9V] (l13)
29AV Input/Output Terminal [AV IN/OUT] 
(l54, 55)
30Tr a y
31Power Lamp [Í] (l13)
32Release Button (l13)
33Device Connector (l13)
34Mode Selector Button [MODE] (l17)
35Recording/Playback Mode Selector Button 
[REC/PLAY] (l17)
36Menu Button [MENU] (l18)
37Multi-function Button
Operating/Select Function
[6/;/5/∫/1SET] (l18, 29, 30, 33)
38Recording Start/Stop Button (l27, 28, 32, 55)
39Zoom Button [T/W] (l35)
Volume Adjustment Button [rVO Ls] (l31)
25
26
27
30
3132
33
35
34
36
37
38
39
28 29
AV100PP.book  11 ページ  ２００３年８月２２日　金曜日　午後４時３０分 
						

							NO
mçïÉê=pìééäó
ªUsing AC Adaptor
NOpen the DC Input Socket Cover and 
connect the DC Input Lead to the [DC IN 
4.9V] socket on the SD Video Camera.
OConnect the AC Cord to the AC Adaptor 
and the AC Main socket.
ªCharging the Battery
Be sure to charge the supplied battery before use.
1While pressing the A part, slide it to 
remove the Battery Compartment Cover.
2Press the terminals of the battery onto 
the terminals of the Battery Compartment 
and set the battery.
≥Fit the battery with its label facing upward.
≥After the battery is set, close the cover.
3Connect the DC Input Lead to the [DC IN 
4.9V] socket on the SD Video Camera.
4Connect the AC Cord to the AC Adaptor 
and the AC Main socket.
≥Power Lamp 1 flashes, and Charging starts.
≥When recharging, turn the power of the SD Video 
Camera off.
5Wait until Power Lamp 1 goes off.
≥When recharging is completed, Power Lamp 1 
goes off.
≥If the Power Lamp flashes quickly (or slowly) when 
recharging, recharging is not normal. (l78)
≥For other notes, see pages 76, 78.
THE SOCKET OUTLET SHALL BE 
INSTALLED NEAR THE EQUIPMENT AND 
SHALL BE EASILY ACCESSIBLE
.
CAUTION
Danger of explosion if battery is incorrectly 
replaced.
Replace only with the same or equivalent type 
recommended by the manufacturer.
Dispose of used batteries according to the 
manufacturer’s instructions.
ON
1
1
2
43
AV100PP.book  12 ページ  ２００３年８月２２日　金曜日　午後４時３０分 
						

							NP
cáííáåÖ=íÜÉ=`~ãÉê~=çå=íÜÉ=^s=
`ê~ÇäÉ
Fitting the Camera on the AV Cradle eases charging. 
The AV Cradle allows the Camera to be connected to 
the external device, such as a TV in order for the 
pictures on this Device to be viewed on the TV.
≥The charging configuration is the same as the one for 
connecting the DC Input Lead to the SD Video 
Camera. (l12)
NOpen the [MULTI] Cover. A
OWhile pressing the Release Button, pull 
out the tray.
PPlace the SD Video Camera on the AV 
Cradle.
≥If the DC Input Socket cover B is open, it is not 
possible to fit the SD Video Camera on the AV 
Cradle.
≥The grooves 1 of the SD Video Camera fit in the 
leading protrusions 2.
QPush the tray until you hear it click.
RConnect the DC Input Lead to the 
[DC IN 4.9V] socket on the AV Cradle.
SConnect the AC Cord to the AC Adaptor 
and the AC Main socket.
≥Power Lamp C flashes, and Charging starts.
≥When recharging, turn the power of the SD Video 
Camera off.
≥When recharging is completed, Power Lamp 
C 
goes off.
≥Be sure to turn the SD Video Camera off before 
fitting it on the AV Cradle.
≥If the AV Cable or AC Adaptor is connected to the SD 
Video Camera, it is not possible to fit the SD Video 
Camera on the AV Cradle.
Remove the SD Video Camera from the AV Cradle
While pressing the Release Button 1, pull out the tray 
and remove the SD Video Camera 2.
≥For other notes, see page 79.
C
A
B
12
N
P
Q
RIS O
1
2
AV100PP.book  13 ページ  ２００３年８月２２日　金曜日　午後４時３０分 
						

							NQ
fåëÉêíáåÖ=~=jÉãçêó=`~êÇ
An SD Memory Card can be used for this SD Video 
Camera.
NOpen the LCD Monitor and slide the Card 
Slot Cover Open Lever to open the Card 
Slot Cover.
OHold the Memory Card placing the cut off 
corner 
1 at the front with the label 2 
facing up, and then insert it fully into the 
Memory Card Slot horizontally.
≥Turn off the SD Video Camera before inserting/
removing a Card.
PClose the Card Slot Cover securely.
ªRemoving the Memory Card
Open the Card Slot Cover and press the center of 
the Card 
A and then pull it straight out B.
≥After removing the Card, close the Card Slot 
Cover.
≥The SD Video Camera may be damaged if the 
Card is forced out when the Card is fully inserted.
≥Keep the SD Memory Card out of the reach of 
children to prevent swallowing.
≥For other notes, see page 79.
1
2
A
B
N
O
AV100PP.book  14 ページ  ２００３年８月２２日　金曜日　午後４時３０分 
						

							NR
rëáåÖ=íÜÉ=i`a=jçåáíçê
Record and play the video image while viewing the 
LCD Monitor.
NPut your finger on the groove 1 to open 
the LCD Monitor.
OAdjust the LCD Monitor angle according 
to the desired recording/playing angle.
≥The LCD Monitor can rotate up to the angles 
illustrated. 
1: Up to 90
° maximum
2: Up to 130
° maximum
3: Up to 140
° maximum
4: Up to 130
° maximum
≥Forcefully rotating the LCD Monitor beyond these 
ranges will damage the SD Video Camera.
≥If the position of the LCD Monitor is set to 2 or 4, 
when you select the Recording Mode only the 
indication which is limited (REC pause [¥;], REC 
[¥] or Warning [°]) appears on screen display. 
If you desired the indication returned to normal, set 
position of the LCD Monitor to 1 or 3.
≥The LCD image may appear slightly brighter than the 
actual recorded image. This is done intentionally to 
provide better visibility when the camera is used 
outdoors in bright sunlight.
≥For other notes, see page 79.
ªVertical Style and Horizontal Style
This SD Video Camera can be used in 2 styles.
1 Vertical Style: Use mainly when recording.
2 Horizontal Style: Use mainly when playing back.
1
2
3
4
1
NIO
1
2
AV100PP.book  15 ページ  ２００３年８月２２日　金曜日　午後４時３０分 
						

							NS
ªPortrait Picture Recording
By opening the LCD Monitor and turning it so that it 
faces forward (to the lens side), you can let the subject 
in front of the SD Video Camera monitor the shot while 
shooting is in progress.
≥If you set the LCD Monitor to this position, an image 
on the LCD Monitor will be reversed when displayed. 
However, recording images are recorded normally.
≥If a general Warning indication [°] appears, return 
the LCD Monitor to the Vertical style in order to verify 
contents. (l71)
ªUsing the Multi-function Button
In this SD Video Camera, the Multi-function Button is 
tilted to the right to 45 degrees in order to make it easy 
to do operation in both the Vertical and Horizontal 
Style.
Move the cursor and selection of the item on the 
display by the Multi-function Button of main unit:
A: 6 (LEFT)
B: ∫ (DOWN)
C: ; (UP)
D: 5 (RIGHT)
D C A
B
AV100PP.book  16 ページ  ２００３年８月２２日　金曜日　午後４時３０分 
						

							NT
qìêåáåÖ=íÜÉ=mçïÉê=låL
pÉäÉÅíáåÖ=léÉê~íáçå=jçÇÉë
Select a desired mode on the mode selection screen.
NSet the Power Switch to [ON].
≥The SD Video Camera is turned on.
OPress the [REC/PLAY] Button to select 
Recording Mode or Playback Mode.
1: Recording Mode
2: Playback Mode
PPress the [MODE] Button to select a 
Operation Mode.
≥Every time the [MODE] Button is pressed, the 
Operation Mode changes as follows.
1: Recording Mode
2: Playback Mode
≥For other notes, see page 79.
ªAbout the Operation Modes
Six operation modes are provided as follows.
Motion image [MPEG2]:
Motion image (MPEG2 format) recording mode 
(l27)
Motion image (MPEG2 format) playback mode 
(l29)
Motion image [MPEG4]:
Motion image (MPEG4 format) recording mode 
(l28)
Motion image (MPEG4 format) playback mode 
(l30)
Still picture [PICTURE]:
Still picture (JPEG format still picture) recording 
mode (l32)
Still picture (JPEG format still picture) playback mode 
(l33)
≥When you use the battery to supply the power with 
the SD Video Camera, it is automatically turned off if 
you leave it for more than approx. 5 minutes without 
any operation.
SET/
g
SET/
SET/
SET/
SET/
O
12
P
12
Í
N
SET/
g
AV100PP.book  17 ページ  ２００３年８月２２日　金曜日　午後４時３０分 
						

							NU
rëáåÖ=íÜÉ=jÉåì=pÅêÉÉå
Allows the functions usable in the selected mode to be 
set from the menu.
NSelect a desired mode. (l17)
OPress the [MENU] Button.
≥The Main Menu in the selected mode is 
displayed.
PPress the ;/∫ side of the Multi-function 
Button to select a desired Main Menu and 
press the [1SET] Button.
≥The Sub-Menu in the selected mode is 
displayed.
QPress the ;/∫ side of the Multi-function 
Button to select a desired Sub-Menu and 
then press the [1SET] Button.
RPress the ;/∫ side of the Multi-function 
Button to select a desired item and then 
press the [1SET] Button.
SPress the [MENU] Button.
≥Menu screen disappears, and the selected item 
is now being set.
Return to the menu one before
Press the 6 side of the Multi-function Button.
≥Press the [MENU] Button when playing back the 
motion image or still picture to edit the file being 
played back.
≥When you do not perform operation the menu screen 
automatically disappears if you leave it for more than 
approx. 1 minutes.
≥For other notes, see page 79.
g
g
SET/Menu
gg
SET/Menu
g
g
SET/Menu
g
g
P O
QIR
S
N
AV100PP.book  18 ページ  ２００３年８月２２日　金曜日　午後４時３０分 
						

							NV
iáëí=çÑ=jÉåìë
The menu images used differ slightly from the actual 
menus. These are offered for simplified illustration 
purposes.
ªRecording Mode
Camera Functions Setup
 1Auto Exposure Mode [Program AE] (l38)
 2Image Stabilizer [EIS] (l39)
 3Digital Zoom [Dig. Zoom] (l35)
 4Wind Noise Reduction [Wind Cut] (l39)
≥This function appears [MPEG2] mode and 
[MPEG4] mode.
Record Functions Setup
 5Picture Quality [Quality] (l27, 28, 32)
 6Input Source [Input Source] (l55)
Date Setup
 7Date and Time Indication Mode [Date Mode] 
(l23)
 8Date and Time Indication [Indication] (l23)
 9Date and Time Setting [Date Set] (l22)
Display Setup
10OSD Indication [OSD Output] (l25)
11LCD Brightness Adjustment [LCD Bright] 
(l24)
12LCD Color Adjustment [LCD Color] (l24)
Initial Setup
13Beep Sound [Beep]
≥This SD Video Camera will emit sound when the 
power switch is changed over, the REC Button is 
pressed, or other operations are engaged. If you 
do not need operating sound, you can switch it 
off.
14Recording LED [Record LED]
≥The Recording Lamp which is on the front of the 
SD Video Camera lights while recording, and 
also flashes during remote control receiving. 
When [Record LED] set to [Off], the Recording 
Lamp will not light. 
1413
g11
1210
g
g
1234
5
6
9
78
AV100PP.book  19 ページ  ２００３年８月２２日　金曜日　午後４時３０分 
						

							OM
ªPlayback Mode
[MPEG2/MPEG4] mode
Scene
 1Deleting a Scene [Delete] (l40)
 2Setting the Lock [File Lock] (l41)
 3Scene Detail [Detail] (l41)
PlayList*
 4Selecting and switching a Play List [Switch] 
(l43)
 5Playing back the Play List [Play] (l44)
 6Creating the Play List [Create] (l43)
 7Editing the Play List [Edit] (l44)
 8Edit a title of the Play List [Title] (l46)
 9Deleting a Play List [Delete] (l47)
Program*
10Switching a Program [Switch] (l48)
11Playing back the Program [Play] (l48)
12Edit a title of the Program [Title] (l49)
Go To
13Go to Top of List [Top] (l50)
14Go to End of List [End] (l50)
*[MPEG2] mode only.1
2
3
ETC.
4
5
6
7
8
9
ETC.
10
11
12
ETC.
g
ETC.
1314
AV100PP.book  20 ページ  ２００３年８月２２日　金曜日　午後４時３０分