Panasonic Sv As10 Operating Instructions Manual

							
41
Setting the White BalanceUse this function to adjust the whiteness when a recorded scene looks bluish or reddish.1Access the menu in the recording 
mode
. (P17)
Select the desired item from  White 
balance .
 Select the item from the table on the 
right. • The setting of the white balance is 
reflected to other REC mode. And it 
is retained even if the power is 
turned off. When turning the power 
on again in different lighting 
conditions, set the white balance 
again.
 When taking a picture with the flash,  the white balance will be automatically 
adjusted, but the white balance may 
not be properly adjusted when the 
flash light is insufficient.
 The white balance may not be  adjusted correctly in dark places.
 Adjustment of white balance in Manual  (P42) is effective under the following 
conditions.
When recording under reddish 
lighting (halogen light bulb, 
incandescent light bulb, etc.).When recording under multiple light 
sources.When recording a picture of 
mono-tone color.
Item
Details of Setting
Auto [ ] It is designed to 
automatically adjust the 
camera to produce 
natural tones. In most 
situations it works fine. 
In some situations 
where several different 
types of lighting are 
present, enhanced 
performance can be 
achieved by setting the 
white balance manually.
Incandescent 
[] For recording under 
incandescent lighting
Daylight 
[] For recording outdoors 
on a bright day
Cloudy [ ] For recording under a 
cloudy and shady sky
Manual [ ] For manual setting 
(Read the following 
page where the manual 
setting is explained in 
detail)
SV-AS10_PP.book  41 ページ  ２００３年７月３０日　水曜日　午後９時２４分 
						

							
42Setting the White Balance
 (Manual)
1Access the menu in the recording 
mode
. (P17)
Select  Manual  from White balance .
2Aim the unit at a sheet of white 
paper A
 or similar object so that it 
completely fills the frame to white on 
the LCD monitor and press the jog 
ball.
 White balance is set.  When taking a picture with the flash 
after setting the white balance 
manually, the white balance may not 
be properly adjusted. We recommend 
setting the white balance to  Auto 
when using the flash.
SV-AS10_PP.book  42 ページ  ２００３年７月３０日　水曜日　午後９時２４分 
						

							
43
Setting the Application Menu1Access the menu in the recording 
mode
. (P17)
Select the desired item from 
Advanced setup .
 Select the item from the table on the 
right.
_ Exposure Compensation [ ]In some situations the illumination of the 
background and your subject may differ. 
Auto exposure systems may not always 
calculate the exposure correctly. This 
feature allows you to manually 
compensate the exposure.
 When compensating the exposure, the brightness of the LCD monitor may 
differ from that of the recorded 
pictures. Check the brightness by 
playing back the picture.Item
Details of Setting
EV auto 
[] The compensation is 
automatically adjusted 
according to the 
brightness of the 
subject and the 
background.
EV manual 
[] You can compensate 
from 
j2 EV to  i2 EV 
with 1/3 EV step by 
rotating the jog ball. 
Compensating to  i 
side brightens the 
picture and to  j side 
darkens it.
òô
SV-AS10_PP.book  43 ページ  ２００３年７月３０日　水曜日　午後９時２４分 
						

							
44Setting the Application Menu 
(Continued)
_ ISO Sensitivity [ ]
ISO is the sensitivity to light. 
It is convenient to take pictures without 
the flash.
• When you take a picture in high ISO 
sensitivity, picture noise appears and 
the picture quality is deteriorated.
_ Auto Review [ ]When setting the  Auto review to ON, 
you can check the picture for about 2 
seconds after taking the picture. You can 
delete the picture by pressing the jog ball 
and selecting  Ye s on the confirmation 
screen.
 Auto review is not activated for the  following materials.VideoBurstStill Picture with Audio
_ Night mode1Access the menu in the recording 
mode
. (P17)
Select  ON from  Night mode .
 While using Night mode, the length of 
the exposure is increased to allow 
more of the natural nighttime lighting to 
be seen. Since the exposure duration 
is increased, it is highly recommended 
that you steady this unit against some 
stationary object to minimize any 
motion blur that can occur.
 When the  REC mode is set to Video, 
you cannot select the  Night mode.
 When taking pictures outdoors at  night, be careful of camera shake.
 You can take a picture of people with  the night view background using the 
flash.
Item
Details of Setting
Auto [ ] The ISO setting is 
automatically increased 
according to the 
brightness. If the picture 
is still dim, use the 
flash.
ISO 100/
ISO 200/
ISO 400 Increasing the ISO 
value will make the 
camera more sensitive 
in low light.
Text E.fm  44 ページ  ２００３年８月２日　土曜日　午後３時３１分 
						

							
45
Using the Playback Zoom1Select the picture in the playback 
mode. (P27)
2Roll the jog ball upwards to display 
the target zoom frame 
1.
3Set the zoom magnification.
4Move the target zoom frame to the 
position to magnify.
5Press the jog ball. The picture in the target zoom frame is enlarged on the whole of LCD monitor.
 After enlarging the picture, The magnification is restored by pressing 
the jog ball.
 You can playback the picture enlarging  up to 10 times.
 The more the picture is enlarged, the  more the picture quality is deteriorated.
 You can cancel the playback zoom by  pressing the  MENU button.
 Playback zoom may not be done on a  picture recorded with other equipment.
SV-AS10_PP.book  45 ページ  ２００３年７月３０日　水曜日　午後９時２４分 
						

							
46Marking the Picture as a “Favorite ”Pictures registered as a Favorite can be displayed as thumbnails (
P35
) or watched on the Slide show (
P47
).
1Access the menu in the playback 
mode. (P17)
Select the desirable setting from 
Mark.
2Select the picture and press the jog 
ball. (Only when selecting  ¡,  
Select/Unselect )¡ or   appears on the LCD monitor. 
If you select the picture again, the 
marking is cancelled.
 Press the  MENU button to exit from 
the menu.
_ Attaching the Background musicAfter selecting   Select/Unselect in 
step 1, select  Ye s in Background music 
select screen.
If you are inserting the card with music 
files, the list of the Background music 
appears. Select 1 Background music and 
press the jog ball._ Cancelling all marksSelect the mark [ ] [ ] to be 
deleted in step 1. All pictures registered 
in ¡ or   are cancelled.
Item
Details of Setting
¡ Select/ 
Unselect [ ] You can register 
the picture as 
favorite. 999 files 
can be registered.
Select/ 
Unselect 
[] You can attach the 
Background music 
to the picture. 36 
files can be 
registered.
ò
SV-AS10_PP.book  46 ページ  ２００３年７月３０日　水曜日　午後９時２４分 
						

							
47
Playing back Still Pictures on the Slide ShowSequentially playing back the pictures allows you to tell a story using a Slide Show feature.1Access the menu in the playback 
mode
. (P17)
Select  Slide show  from Play mode  
[].
Select the desired item from  Slide 
show .
 Select the item from the table on the 
right.  You cannot watch a slide show of the 
motion image.
 You can stop slide show when  pressing the jog ball during slide show.
 You can adjust the volume with the  volume button on the remote controller 
during the   Mark slide show with 
Background music. (The volume 
control screen does not appear. You 
cannot adjust the volume by keeping 
the button pressed.)
 Still pictures recorded with other  equipment may not be displayed on 
the Slide show or they may take time 
to be displayed.
 It may take time to display the   Mark  slide show with Background music. But 
this is not a malfunction.
Item
Details of Setting
Slide show 
[] All the pictures are 
played back for about 5 
seconds per 1 picture in 
the order of the file 
number.
Slide 
show 
[] The pictures set on 
 
Mark  are played back 
for about 5 seconds per 
1 picture.
Background music can 
be attached. (P46)
SD slide 
show 
[] The pictures set by SD 
Viewer (supplied 
software on the 
CD-ROM) are played 
back for about 5 
seconds per 1 picture.
¡ Slide show 
[] The pictures set on 
¡ 
Mark  are played back 
for about 5 seconds per 
1 picture.
ò
SV-AS10_PP.book  47 ページ  ２００３年７月３０日　水曜日　午後９時２４分 
						

							
48Setting the Still Pictures to be Printed 
(DPOF print)
DPOF allows you to select which pictures you would like to print and how many of each you would like.
1Access the menu in the playback 
mode
. (P17)
Select the desired item from  DPOF 
print .
2Select the picture. (Only when 
selecting  Single print )
3Select the number of printing and 
press the jog ball. You can set the number up to 999.
 When setting to 0, DPOF setting is 
cancelled.
Item
Details of Setting
Single print 
[]: Set DPOF printing for 
each files.
All prints 
[]: Set DPOF printing for 
all files in the card.
Print date 
[] Refer to P49.
SV-AS10_PP.book  48 ページ  ２００３年７月３０日　水曜日　午後９時２４分 
						

							
49
_About printing with dateWhen selecting  ON from  Print date  of 
Step 1, you can print the picture with the 
date and time.
 All pictures will print with the date. You  cannot choose which pictures are 
printed without the date when it is set 
to  ON .
 You cannot print the date on the file  without setting of the recording date.
 The date may be cut or not be  displayed depending on the printer.
 When selecting  OFF, the setting of all 
pictures is cancelled.
_ About DPOFDPOF  is the abbreviation for  Digital 
Print Order Format . This feature allows 
you to designate which pictures will be 
printed. Some photo printers as well as 
many commercial photo-processing 
companies support DPOF.
If the DPOF setting is determined, you do 
not need to indicate which or how many 
pictures are to be printed.  If the file is not based on the 
DCF 
standard, the DPOF setting cannot be 
designated.
DCF  is the abbreviation for  Design 
rule for Camera File system , 
stipulated by  JEITA (Japan 
Electronics and Information 
Technology Industries Association) . 
 When using the DPOF feature, this  unit will overwrite any previous DPOF 
settings made by other products.
 When the message of  CARD FULL is 
displayed, delete the unnecessary files 
and designate DPOF again.
 When designating or cancelling many  files, use a fully charged battery or AC 
adaptor and USB cradle.
 DPOF setting may not be added on a  picture recorded with other equipment.
SV-AS10_PP.book  49 ページ  ２００３年７月３０日　水曜日　午後９時２４分 
						

							
50Preventing Accidental Erasure of Files 
(Lock setting)
To prevent accidentally erasing precious photos, we strongly recommend using this feature.
1Access the menu in the playback 
mode
. (P17)
Select Lock/Unlock
 from 
Lock
.
2Select the file and press the jog ball. [ ] is displayed on the LCD monitor.  The setting is cancelled when 
selecting the picture again.
_ To cancel all locked filesWhen you select  Unlock all in step 1 and 
then select  Ye s on the confirmation 
screen, all the lock settings are 
cancelled.
 Formatting the card will delete all the  data on the card, even if you protect 
the files in this procedure. (P18)
 You cannot delete the locked files. If  you want to delete the file, cancel the 
lock setting first.
 The lock setting may not be effective in  other products.
 Sliding the SD Memory Card  Write-Protect switch to  LOCK prevents 
the picture from deletion even if the 
protection is not set. (P16)
 Audio dubbing, resizing and altering  the color cannot be done with locked 
pictures. (P51, 52, 53)
SV-AS10_PP.book  50 ページ  ２００３年７月３０日　水曜日　午後９時２４分