Panasonic Sv As10 Operating Instructions Manual

							
31
Playing Back Music1Insert the card which includes music 
files.Connect the remote controller and the 
stereo earphones to this unit. (P9)• The MPEG2-AAC files, MP3 files or WMA files recorded with SD-Jukebox 
Ver.4 (supplied) can be played. 
(Depending on the quality of the files, 
they may not be played even if they are 
recorded under MPEG2-AAC, MP3 or 
WMA format.)
 This device supports MPEG2-AAC  files, MP3 and WMA file formats. The 
files must be recorded to this device 
using the SD Jukebox software that 
comes with SV-AS10. Files obtained or 
created by other means, copied to the 
SD card, will not play on this unit.
2Access the menu in the playback 
mode. (P17)
Select  Audio player  from Play 
mode  [].
3Select  List from the menu. When you do not select the List, the 
music is played back from the track 
displayed.
Text E.fm  31 ページ  ２００３年７月３０日　水曜日　午後１０時５３分 
						

							
32Playing Back Music 
(Continued)
4_With the remote controllerSelect the file and play it back
. _
With this unit
Roll the jog ball up and down to 
select the file and play it back. _
Adjusting the volume using 
Remote Controller
 Turn up the volume with  i, turn down 
the volume with  j.
 If the volume adjustment screen is not  operated for a while after adjustment, it 
will automatically disappear ._Saving power consumption
(Power save)Select  Power save  [] from the menu 
in  Audio player  mode and then select 
ON .
If you operate nothing after the setting, 
the LCD monitor is turned off in about 5 
seconds.
 If you turn the LCD monitor on again,  operate the button of this unit (except 
for the jog ball and the power button).
 If you want to cancel the power save  mode, select  OFF from  Power save .

1
:
Playback
 ∫
:
Stop
 :
, 9
：
(Press the button 
gently)
Index search
 :
, 9
：
(Keep pressing the 
button)
fast- rewind/forward
You can fast-forward or fast-rewind 
in 1 track.
 Playback 
(Stop): Press the jog ball.
 Index search: Roll the jog ball right  and left.
SV-AS10_PP.book  32 ページ  ２００３年７月３０日　水曜日　午後９時２４分 
						

							
33
_Switching the sound quality (EQ) 
using Remote ControllerThe indication changes as follows each 
time you press the Equalizer [EQ] button.
_ ControllerSelect  Controller  [ ] from the menu 
when in  Audio player  mode and then roll 
the jog ball to adjust the volume and 
switch the sound quality. You can also 
select Playback, Stop, Index search.
_ Playing back repeatedly
(Repeat play)Select  Repeat play  [ ] from the menu 
in  Audio player  mode and then select 
the desired setting.
NORMAL  l  S-XBS1  l  S-XBS2  l 
TRAIN  l  NORMAL
 NORMAL : The sound quality 
is normal.
 S-XBS1 : The audio sounds 
lower and heavier.
 S-XBS2 : The audio sounds 
even lower and 
heavier than when 
in S-XBS1.
 TRAIN : The audio sounds 
soft and will not be 
heard by those 
around you.
 Volume: Roll the jog ball right  and left to adjust the 
volume.
 Sound  quality (EQ):
Press the jog ball to 
switch the sound 
quality.
 Operation: P
ress the jog ball to 
operate 
playback 
(Stop), Index search
.
 OFF : Does not repeat 
playback.
 Single song 
repeat : Repeats the music 
being played only.
 All song 
repeat :  Repeats all music 
tracks.
(When selecting a 
playlist, all music in 
the playlist is 
played)
SV-AS10_PP.book  33 ページ  ２００３年７月３０日　水曜日　午後９時２４分 
						

							
34Playing Back Music 
(Continued)
_ Selecting playlist
You can select and play back the playlist 
set on SD-Jukebox Ver.4 (supplied).
Select  Playlist  [] from the menu in 
Audio player  mode and then select the 
desired playlist.
• When you select the item on the top of  the list, all music files recorded are 
played back.  For details about recording of music 
file and playlist, refer to the operating 
instructions of SD-Jukebox Ver.4 
(supplied).
 When adding picture files to a music  file on SD-Jukebox Ver.4, the first 
added picture is displayed as a 
thumbnail of the music file.
 This unit is not capable of recording  and deleting music.
 Using its formatting function, all the  data on the card can be deleted.
 A title and an artist name may not be  displayed in some cases.
 When pressing Screen Reversal  Button/HOLD Button for about 2 
seconds or more, HOLD appears on 
the display and then the button 
operations of this unit (except for the 
power button) are disabled. When you 
repeat the same procedure, the button 
operations are enabled.
When you turn the power on again, the 
button operations are enabled.  The remote controller can be 
connected even when using the 
carrying case (supplied).Text E.fm  34 ページ  ２００３年７月３０日　水曜日　午後１０時５３分 
						

							
35
Multi File Playback
 (Thumbnail display)
1Access the menu in the playback 
mode. (P17)
Select Thumbnail  from Play mode  
[].
Select the type of the file. Select the item from the table on the  right.
 6 thumbnails appear on the LCD  monitor.
2Select the file and press the jog ball. The selected file appears on the LCD  monitor.
 When displaying the music file as  thumbnail, select  Audio player from 
Play mode  and then select 
Thumbnail .
Item
Details of Setting
All files 
[] All kinds of files (except 
for music files) are 
displayed as 
thumbnails.
Still picture 
[] Still picture files are 
displayed as 
thumbnails.
Mark 
[] Files with   mark 
(P46) are displayed as 
thumbnails.
DPOF print 
[] Files with DPOF 
printing (P48) are 
displayed as 
thumbnails.
¡ Mark 
[] Files with 
¡ mark (P46) 
are displayed as 
thumbnails.
Video 
[] Movie files are 
displayed as 
thumbnails.
ò
SV-AS10_PP.book  35 ページ  ２００３年７月３０日　水曜日　午後９時２４分 
						

							
36Erasing Files1Access the menu in the playback 
mode. (P17)
Select the desired setting from 
Erase file. Select the item from the following 
items.
2Select the file. (Only when selecting 
Erase one )
Select  Ye s on the confirmation 
screen and then press the jog ball. Once deleted, pictures cannot be 
recovered. Check the picture before 
deleting.  You cannot delete protected files. 
Cancel the protection before deleting 
files. (P50)
 Be sure to delete audio files with this  unit only.
 When you delete files on this unit, the  DPOF information set on other 
equipment can be also deleted.
 Still pictures which cannot be played  on this unit (other than JPEG) can be 
deleted.
 Do not turn the power off or remove  the card when deleting.
 When you delete many files at the  same time, use a fully charged battery.
 Even if selecting  Erase all, locked files 
(P50) or out of DCF standards are not 
deleted.
 Still pictures can be deleted during  auto review in recording mode. (P44)
Item
Details of Setting
Erase one [ ] Erases only 1 file.
Erase all [ ] Erases all files 
(except for music 
files) in a card.
SV-AS10_PP.book  36 ページ  ２００３年７月３０日　水曜日　午後９時２４分 
						

							
37
Setting FlashConfirm that the lens is facing the front. Otherwise, the flash does not fire.1Access the menu in the recording 
mode
. (P17)
Select the desired item from  Flash.
 Select the item from the table on the 
right.
Item
Details of Setting
Auto [ ] The flash fires 
automatically according 
to the lighting 
conditions.
Reduced red 
eye [ ]
The flash fires 
automatically according 
to the recording 
situation.
It reduces the red eye 
phenomenon (When a 
subject’s eyes appear 
red in flash light).
Use it when you take 
pictures of people or 
animals in low lighting 
conditions.
Flash off 
[] Even in dark places, the 
flash does not fire.
Use it w
hen you take 
pictures in places where 
using flash is not 
allowed.
Flash on 
[] The flash fires every 
time a picture is 
captured.
Use it when
 your subject 
is back-lit or under 
fluorescent light.
SV-AS10_PP.book  37 ページ  ２００３年７月３０日　水曜日　午後９時２４分 
						

							
38Setting Flash 
(Continued)
 When setting REC mode to Video  or 
Burst , the flash setting is fixed to 
Flash off .
 When rotating the lens, an orange 
flash off mark [ ] appears.
When setting to  Auto or Reduced red 
eye  in the bright place, flash off mark 
appears.
When using the flash,
 Do not stare at the flash light from  close proximity.
 Do not use the flash if taking a picture  in the close proximity of the subject. 
The amount of light may overexpose 
the image causing color or image 
degradation.
 Do not cover the flash with your  fingers.  The available flash range is about 1.64 
feet (50 cm) - 3.28 feet (1 m). If the 
subject is too close to the camera 
when taking a picture, the exposure 
value may not be set properly and the 
picture may appear washed out.
 The flash indication blinks red during  charge. You cannot take a picture even 
when you press the shutter button.
 When taking a picture with the flash,  the white balance will be automatically 
adjusted, but the white balance may 
not be properly adjusted when the 
flash light is insufficient.
 When taking a picture with the flash  after setting the white balance 
manually (P42), the white balance may 
not be properly adjusted. We 
recommend setting the white balance 
to  Auto  when using the flash. (P41)SV-AS10_PP.book  38 ページ  ２００３年７月３０日　水曜日　午後９時２４分 
						

							
39
Changing the Quality and Size of PictureYou can change quality and size of a picture according to its use (e.g. printing, e-mail, etc.).1Access the menu in the recording 
mode
. (P17)
Select the desired item from  Quality 
mode .
2Take a picture.
Fine  gives priority to picture quality to 
record high quality pictures.
 Normal  gives priority to the number of 
recordable pictures and records 
standard quality pictures.
 The smaller the picture size you select,  the more pictures you can store on the 
card. In addition, a small data volume 
allows you to attach the picture to an 
e-mail or post it on a website. 
 If you select a larger picture size, the  printed picture will be clearer, 
especially with larger sized prints.
 When setting  REC mode to Video , 
you cannot change the quality and size 
of picture. (The picture size is fixed to 
320 a240 pixels.)
 Pictures may be shown in mosaic-like  pattern depending on the scene.
Quality
Size
Fine [ ]1600
a1200
1280a960
640
a480
Normal [ ]
1600
a1200
1280a960
640
a480
SV-AS10_PP.book  39 ページ  ２００３年７月３０日　水曜日　午後９時２４分 
						

							
40Taking Pictures with the Self Timer1Access the menu in the recording 
mode. (P17)
Select
 ON from  Self timer .
2Take a picture. The self timer lamp blinks.
 This unit start taking a picture in about 
10 seconds.  If you press the 
MENU button while the 
self timer is activated, the self timer is 
cancelled.
 When setting  REC mode to Video  or 
Burst , you cannot set the self timer.
 Use USB cradle when taking pictures  with the self timer.
SV-AS10_PP.book  40 ページ  ２００３年７月３０日　水曜日　午後９時２４分