Panasonic Sv As10 Operating Instructions Manual

41
Setting the White BalanceUse this function to adjust the whiteness when a recorded scene looks bluish or reddish.1Access the menu in the recording 
mode
. (P17)
Select the desired item from  White 
balance .
 Select the item from the table on the 
right. • The setting of the white balance is 
reflected to other REC mode. And it 
is retained even if the power is 
turned off. When turning the power 
on again in different lighting 
conditions, set the white balance 
again.
 When taking a picture with...

42Setting the White Balance
 (Manual)
1Access the menu in the recording 
mode
. (P17)
Select  Manual  from White balance .
2Aim the unit at a sheet of white 
paper A
 or similar object so that it 
completely fills the frame to white on 
the LCD monitor and press the jog 
ball.
 White balance is set.  When taking a picture with the flash 
after setting the white balance 
manually, the white balance may not 
be properly adjusted. We recommend 
setting the white balance to  Auto 
when using the flash....

43
Setting the Application Menu1Access the menu in the recording 
mode
. (P17)
Select the desired item from 
Advanced setup .
 Select the item from the table on the 
right.
_ Exposure Compensation [ ]In some situations the illumination of the 
background and your subject may differ. 
Auto exposure systems may not always 
calculate the exposure correctly. This 
feature allows you to manually 
compensate the exposure.
 When compensating the exposure, the brightness of the LCD monitor may 
differ from...

44Setting the Application Menu 
(Continued)
_ ISO Sensitivity [ ]
ISO is the sensitivity to light. 
It is convenient to take pictures without 
the flash.
• When you take a picture in high ISO 
sensitivity, picture noise appears and 
the picture quality is deteriorated.
_ Auto Review [ ]When setting the  Auto review to ON, 
you can check the picture for about 2 
seconds after taking the picture. You can 
delete the picture by pressing the jog ball 
and selecting  Ye s on the confirmation 
screen.
 Auto...

45
Using the Playback Zoom1Select the picture in the playback 
mode. (P27)
2Roll the jog ball upwards to display 
the target zoom frame 
1.
3Set the zoom magnification.
4Move the target zoom frame to the 
position to magnify.
5Press the jog ball. The picture in the target zoom frame is enlarged on the whole of LCD monitor.
 After enlarging the picture, The magnification is restored by pressing 
the jog ball.
 You can playback the picture enlarging  up to 10 times.
 The more the picture is enlarged,...

46Marking the Picture as a “Favorite ”Pictures registered as a Favorite can be displayed as thumbnails (
P35
) or watched on the Slide show (
P47
).
1Access the menu in the playback 
mode. (P17)
Select the desirable setting from 
Mark.
2Select the picture and press the jog 
ball. (Only when selecting  ¡,  
Select/Unselect )¡ or   appears on the LCD monitor. 
If you select the picture again, the 
marking is cancelled.
 Press the  MENU button to exit from 
the menu.
_ Attaching the Background musicAfter...

47
Playing back Still Pictures on the Slide ShowSequentially playing back the pictures allows you to tell a story using a Slide Show feature.1Access the menu in the playback 
mode
. (P17)
Select  Slide show  from Play mode  
[].
Select the desired item from  Slide 
show .
 Select the item from the table on the 
right.  You cannot watch a slide show of the 
motion image.
 You can stop slide show when  pressing the jog ball during slide show.
 You can adjust the volume with the  volume button on the...

48Setting the Still Pictures to be Printed 
(DPOF print)
DPOF allows you to select which pictures you would like to print and how many of each you would like.
1Access the menu in the playback 
mode
. (P17)
Select the desired item from  DPOF 
print .
2Select the picture. (Only when 
selecting  Single print )
3Select the number of printing and 
press the jog ball. You can set the number up to 999.
 When setting to 0, DPOF setting is 
cancelled.
Item
Details of Setting
Single print 
[]: Set DPOF printing...

49
_About printing with dateWhen selecting  ON from  Print date  of 
Step 1, you can print the picture with the 
date and time.
 All pictures will print with the date. You  cannot choose which pictures are 
printed without the date when it is set 
to  ON .
 You cannot print the date on the file  without setting of the recording date.
 The date may be cut or not be  displayed depending on the printer.
 When selecting  OFF, the setting of all 
pictures is cancelled.
_ About DPOFDPOF  is the...

50Preventing Accidental Erasure of Files 
(Lock setting)
To prevent accidentally erasing precious photos, we strongly recommend using this feature.
1Access the menu in the playback 
mode
. (P17)
Select Lock/Unlock
 from 
Lock
.
2Select the file and press the jog ball. [ ] is displayed on the LCD monitor.  The setting is cancelled when 
selecting the picture again.
_ To cancel all locked filesWhen you select  Unlock all in step 1 and 
then select  Ye s on the confirmation 
screen, all the lock settings...