Panasonic Sv As10 Operating Instructions Manual

11
Remove the BatteryBe sure to turn the power off when you remove the battery.1Slide the door while releasing the 
lock. 1
Open the door.  2
2Release the Battery lock  A to 
remove the battery. When you do not use the camera for a 
long time, remove the battery.
 Never open the Card/Battery door  during the access. (P16) Otherwise, 
the data on the card may be damaged.
 The supplied battery is only for this  camera. Do not use it for other 
devices.
3Close the door.  1
Lock the door while sliding...

12Charging the Battery1Connect the plug of AC adaptor to 
the outlet and connect the DC plug 
to the USB cradle.
2Charge the battery.• Align the connections.
 Be sure to turn the power off when charging the battery.
 Do not insert this unit in a wrong  direction.
 The charge lamp blinks in about 3  seconds after connecting this unit with 
USB cradle.
3When the charge lamp turns off, the 
battery is charged fully. It takes about 120 minutes.Remove this unit from the cradle 
while pressing the...

13
Charging Information• It’s normal for the battery and the camera to be warm following normal 
use and charging. This is not a 
malfunction.
 Use the supplied cradle or AC adaptor  for this unit.
 Pull the plug out of the electrical outlet  after completing the charge.
 Do not disassemble or alter the cradle  or AC adaptor._ Battery indicatorThe remaining battery power is displayed 
on the LCD monitor in use.
The indication is changed as follows 
##
(blinking) 
according to the consumption of the...

14Insert the CardBe sure to turn the power off when you insert the card.1Slide the door while releasing the 
lock. 1
Open the door.  2
2Insert the card all the way in until it 
clicks. Check the direction of the card.
 Do not touch the connecting terminal 
on the rear of the card.
 If you do not insert the card all the way,  it may be broken.
3Close the door.  1
Lock the door while sliding it.  2 If you cannot close the Card/Battery 
door completely, remove the card 
once, then insert it again.
 We...

15
Remove the CardBe sure to turn the power off when you remove the card.1Slide the door while releasing the 
lock. 1
Open the door.  2
2Press the card until it clicks to 
release and pull out the card.
3Close the door.  1
Lock the door while sliding it.  2
SV-AS10_PP.book  15 ページ  ２００３年７月３０日　水曜日　午後９時２４分 

16About Cards_Access to the cardWhen you access the card, 
(recognition/recording/reading/deleting) 
the Power/Card Access lamp blinks 
quickly.
When the Power/Card Access lamp is 
blinking, do not turn the power off or do 
not remove the battery and the card.
Otherwise, the card or its contents may 
be damaged, or the camera may not 
work properly.
The data of the card may be damaged or 
lost because of the electrical noise, static 
or breakdown of the camera or the card. 
Save your precious data to...

17
Basic Menu Operation1Press the Power Button for 1 second 
to turn the power on. 1
Select the recording mode [ ] or 
playback mode [ ].  2
2Press the MENU button to access 
the menu.
3Select the menu item using the Jog 
Ball.
4Select the desired feature using the 
Jog Ball.
5Press the Jog Ball to set.
To stop the operation, 
Press the 
MENU  button.
 If the Jog Ball is left without any  operation for about 30 seconds, the 
unit exits the menu automatically.
 When you press the  MENU button for...

18About the Setup MenuItems 
Details of the setting
Vo l u m e  [ ] 
Beep ON: The operational sound turns on.
 Beep OFF: The operational sound turns off.
 Main volume: Adjust the volume of the speaker.
Format card [ ]  Warning: If the SD Memory Card is formatted, all data, including locked data, will be lost. Please 
review the contents of the SD Memory Card before formatting.
Icon display [ ] 
ON: Display the icon on the LCD monitor.
A: Recording mode  B: Playback mode
 OFF: Does not display the...

19
Setting the Date/Time1Access the menu. 
(P17)
Select  Clock set  from Clock set  
[ ] on the  Setup menu.
2Set the year, month, day and time. When pressing the jog ball, year, 
month, day and time is set.
When rolling it up and down, the 
number is set.
 Press the  MENU button to exit from 
the menu.
_ Initial UseThe clock is not set when shipping. When 
you turn the power on, the clock setting 
screen appears. Adjust the time here.
 If you do not set the clock here, the 
clock is automatically...

20Taking a Picture 
(Still Picture)
1Turn the power on. 1 The power/card access lamp is lit in 
red.Switch to the recording mode [ ]. 
2
2Access the menu. (P17)
Select  Still picture  from REC mode  
[].
3Press the shutter button to take a 
picture.
SV-AS10_PP.book  20 ページ  ２００３年７月３０日　水曜日　午後９時２４分