Panasonic Software DP-2310/3010/3510/3520/4510/4520/6010/6020 Document Management System And Printer Operating Instructions

Configuring the Printer Driver Settings
51
Printer Section
To change the printer settings, open the dialog box for the printer properties by performing the following
steps.
NOTE1. In Windows NT 4.0, setting the properties depends on the logon account. This section
describes properties to be specified by the administrator (system manager).
See Configuring the Printer Driver Settings (User) for details on user properties.  (See page
61)
Windows NT 4.0 (Administrator)
1
Logon to the computer/network using...

Configuring the Printer Driver Settings
52
Windows NT 4.0 (Administrator)
General Tab
1.Comment
Enter comments to the properties, if any.
If another user sets up this printer on his or her computer when sharing the printer, the comment specified
here will also appear on that computer. However, the comment displayed for an existing user will remain
unchanged even if the comment is modified later.
2.Location
Specifies the printer location.
3.Driver
Displays the printer driver type. Specify the printer...

Configuring the Printer Driver Settings
53
Windows NT 4.0 (Administrator)
Printer Section
Ports Tab
1.Print to the following port(s)
Displays a list of available ports for printing (Port), their status (Description) and printers that are
connected to these ports (Printer).
2. /   button
Adds/deletes a new port or a new network path.
3. button
Configures the selected port. In case of a parallel port, Transmission Retry should be specified. (See
Note 1 and 2)
4.Enable bidirectional support
This setting...

Configuring the Printer Driver Settings
54
Windows NT 4.0 (Administrator)
Scheduling Tab
1.Available
Schedules when the printer is available for operation. Specify operating hours when From-To is selected.
2.Priority
Sets printing priority. The slider allows the priority to be adjusted from 1 through 99.
3.Spool print documents... / Print directly to the printer
Specify how documents should be sent from an application to the printer.
4.Hold mismatched documents
The spooler compares document settings...

Configuring the Printer Driver Settings
55
Windows NT 4.0 (Administrator)
Printer Section
Sharing Tab
1.Not Shared/Shared
Select whether to display or share this printer with other computers.
2.Share Name
Specify the name of the shared printer. The displayed name can be used as it is or a new name may be
entered. The name specified here will be displayed when other users view information about the printer
on the network.
3.Alternate Drivers (See Note 1)
Allows other operating systems printer drivers to...

Configuring the Printer Driver Settings
56
Windows NT 4.0 (Administrator)
Security Tab 
1. button
Set printer access privileges.
2. button
Displays the users who have used this printer and how they used it.
3. button
Set the ownership of the printer.
NOTE1. In order to utilize these features, first you need to select Autid... from User Managers Policies
and enable File and Object Access in the Audit Policy dialog box.
Permissions
Auditing
Ownership 

Configuring the Printer Driver Settings
57
Windows NT 4.0 (Administrator)
Printer Section
Device Options Tab (For DP-2310/3010)
1.Outer Option
  Select the installed outer option.
2.Inner Tray
Select Installed if the Inner Tray is installed.
3.Duplex Unit
Select Installed if the Duplex Unit is installed.
4.HDD
Select Installed if the HDD Unit is installed.
5.Halftone Setup
 button
Select the halftoning method to be used (halftones specific to the printer).
Select it according to the details of the data...

Configuring the Printer Driver Settings
58
Windows NT 4.0 (Administrator)
•Halftone Pattern
Select the pixel size to be used for halftones.
The greater the value, the coarser the image would become. However, a larger value is suited for
printing large areas.
The Enhanced pattern allows printing at a higher resolution using the same number of pixels. However,
the pattern might generate unnatural lines, patterns, moire effects, and so on depending on the image to
be printed.
•Device Gamma
Adjust the gamma...

Configuring the Printer Driver Settings
59
Windows NT 4.0 (Administrator)
Printer Section
Device Options Tab (For DP-3510/3520/4510/4520/6010/6020)
1.Finisher
Select the type of the finisher if one is installed.
2.Punch Unit
Select Installed if the Punch Unit is installed.
3.Large Capacity Paper Tray (LCT)
Select Installed if the Large Capacity Paper Tray is installed.
4.HDD
Select Installed if the HDD Unit is installed.
5.Halftone Setup
 button
Select the halftoning method to be used (halftones specific...

Configuring the Printer Driver Settings
60
Windows NT 4.0 (Administrator)
•Halftone Pattern
Select the pixel size to be used for halftones.
The greater the value, the coarser the image would become. However, a larger value is suited for
printing large areas.
The Enhanced pattern allows printing at a higher resolution using the same number of pixels. However,
the pattern might generate unnatural lines, patterns, moire effects, and so on depending on the image to
be printed.
•Device Gamma
Adjust the gamma...