Panasonic Software DP-1510P/1810P/1810F/2000/2010E/2500/3000 Operating Instructions

Configuring the Printer Driver Settings
51
Windows 2000/XP (Administrator)
Printer Section
Sharing Tab
1.Not Shared/Shared As
Specify if this printer is displayed or used on a computer of other users.
For sharing a printer, specify the share name of a printer to be shared. A name specified here appears
when other users view the printer information on a network.
2. button
Install additional printer drivers on the system.
When users running different versions of Windows share a printer, installing...

Configuring the Printer Driver Settings
52
Windows 2000/XP (Administrator)
Ports Tab
1.Print to the following port(s)
Displays a list of ports that allows printing, their status (description), and printers connected to the ports.
2. /   button
Adds/deletes a new port or a new network path.
3. button
Configure the port that is selected. On a parallel port, wait time (in seconds) for retransmission is
specified.
4.Enable bidirectional support
On a printer, this setting enables reception of configuration...

Configuring the Printer Driver Settings
53
Windows 2000/XP (Administrator)
Printer Section
Advanced Tab
1.Always available/Available from
Specify the operation schedule for a printer. Selecting Available from allows specifying an operation
time.
2.Priority
Specify the priority in printing. Priority is adjustable from 1 to 99. Document of higher priority are printed
before those of lower priority.
3.Driver
Displays the printer driver type. Specify the printer being used or a printer model that can be...

Configuring the Printer Driver Settings
54
Windows 2000/XP (Administrator)
9.Enable advanced printing features
Enables advanced printing features. Optional features of the printer (page ordering, booklet printing,
numbering on sheets) are enabled. These features can be disabled if a problem occurs due to
incompatibility. Disabling the features may disable the printing options also.
10. button
Specifies standard (default) values for the properties (print settings) specifiable for each user. If a local...

Configuring the Printer Driver Settings
55
Windows 2000/XP (Administrator)
Printer Section
Security Tab
Displays a list of users and groups that are assigned access to this printer. A list of standard access
permitted/prohibited for each group or user is displayed. Check the checkbox for permitting or prohibiting
access. Gray checkbox indicates inheritance of access permission.
1. /   button
Add or delete a user or group in the list.
2. button
Specify access to a printer, audit, and owner.
NOTE1. Windows...

Configuring the Printer Driver Settings
56
Windows 2000/XP (Administrator)
Device Options Tab
1.Security Print Password (For DP-1810F/2000/2500/3000)
Set the password for Security Print, to enable the feature.
2.Duplex Unit (For DP-2000/2500)
Check this checkbox if the Automatic Duplex Unit (DA-MD200) is installed.
3.Inner Tray (For DP-2000/2500/3000)
Check this checkbox if the Exit Tray (Inner) and the Dual-Path Exit Guide Unit (DA-XN200/FK200) are
installed.
Specifying inner bins, Inner 1 and Inner 2,...

Configuring the Printer Driver Settings
57
Windows 2000/XP (Administrator)
Printer Section
Font Substitution Tab
Displays and edit the Font Substitution Table.
In the original setting, the Font Substitution Table is set to substitute TrueType fonts with the most similar
printer fonts. However, if you wish to modify the substitution, select a font from the list of TrueType fonts
displayed at the top and then select a corresponding Printer font from the Substituted printer fonts list box. 

Configuring the Printer Driver Settings
58
Changes the printer settings. Display the printer settings dialog box by the steps below:
NOTE1. In Windows 2000/XP, setting the properties depends on the log-in accounts. This section
describes properties to be specified by a user, upon executing a print operation on an
application. See Configuring the Printer Driver Settings (Administrator) for details of
administrator (system manager) properties. (See page 49)
Windows 2000/XP (User)
1
Select Print in the File...

Configuring the Printer Driver Settings
59
Windows 2000/XP (User)
Printer Section
Paper/Layout Tab
1.Paper Size
Select a document size.
2.Paper Source
Specify where the paper you want to use is located in the machine. If you choose Auto Selection, the
printer driver will automatically select an appropriate tray according to the Paper Size.
3.Orientation
Select the print orientation (Portrait/Landscape).
4.Copies (1-999)
Specify the number of copies to be printed. If the number of copies to be printed can...

Configuring the Printer Driver Settings
60
Windows 2000/XP (User)
6.Magnify
Select a fixed enlargement/reduction ratio according to the paper size. Specifying the magnification ratio
changes the Zoom to display the actual enlargement/reduction percentage.
7.N in 1
Specify the layout pattern for printing multiple documents on a single sheet of paper.
Selecting 2 in 1 or 4 in 1 changes the Zoom to display the actual enlargement/reduction percentage.
Note: 2 in 1 or 4 in 1 allows the user to select the...