Panasonic Software DP-1510P/1810P/1810F/2000/2010E/2500/3000 Operating Instructions

Installing the LPR (Line Printer Remote) Monitor
11
Windows 98/Me
Printer Section
12The screen reverts to the Printer’s Properties.
Check that the Print to the following port: was
changed as entered, and click on the Apply button
first and then on the   button.
The printer properties dialog box is closed and you
have now configured the printer as a network printer.
OK 

Installing the LPR (Line Printer Remote) Monitor
12
Log in using an account with the administrators right.
Windows NT 4.0
1Click on the Start button, point to Settings, and click
Control Panel.
The Control Panel window appears.
Double-click on the Network applet.
The Network dialog box appears.
2Click on the Services tab.
Verify whether the LPR Service is already installed.
(Indicated by Microsoft TCP/IP Printing shown in the
Network Services list.)
If it is already installed, skip over to Step 7....

Installing the LPR (Line Printer Remote) Monitor
13
Windows NT 4.0
Printer Section
4The Windows NT Setup dialog box appears.
Insert the Windows NT 4.0 CD-ROM, and type
D:\i386 (where D: is your CD-ROM drive).
Click on the   button.
5After the files are copied into your Hard Drive, the
display returns to the Network dialog box. Confirm
that the Microsoft TCP/IP Printing service was added
to Network Services list.
Click on the   button.
Note:
Delete and Reinstall the Microsoft TCP/IP
Printing if an error...

Installing the LPR (Line Printer Remote) Monitor
14
Windows NT 4.0
8The following step is to Register the LPR Port for
network printing.
Before proceeding, ensure that the Printer is
installed, connected to the Network, is turned ON
and operating properly.
Select the Ports Tab and click on the
 button.
9The Printer Ports dialog box appears.
Select LPR Port and click the 
button.
10The Add LPR compatible printer dialog box
appears.
Enter the IP Address of the Printer in the upper field,
and lp for the...

Installing the LPR (Line Printer Remote) Monitor
15
Windows NT 4.0
Printer Section
11The Printer Ports dialog box appears.
Click on the   button.
12Select the printer port and click the 
button.
The printer properties dialog box is closed and you
have now configured the printer as a network printer.
Close
OK 

Installing the LPR (Line Printer Remote) Monitor
16
Log in using an account with the administrators right.
Windows 2000/XP
1Open the Printers folder.
Right-click on your desired printer (Ex.
Panasonic DP-3000 PCL) and select
Properties from the pop-up menu.
The printer properties dialog box appears.
2Select the Ports Tab and click on the
 button.
Add Port... 

Installing the LPR (Line Printer Remote) Monitor
17
Windows 2000/XP
Printer Section
3Select Standard TCP/IP Port and click the
 button.
4Click on the   button.
5Enter the IP Address and the Port Name and
click the   button.
Note:
The Port Name is automatically
entered by Windows 2000/XP. You
may change this as required.
New Port ...
Next
Next
Continued on the next page... 

Installing the LPR (Line Printer Remote) Monitor
18
Windows 2000/XP
6Select Custom and click the 
button.
71. Under the Protocol, select LPR.
2. Under the LPR Settings, enter the
Queue Name (Ex. LPR1) and check the
LPR Byte Counting Enabled.
3. Click on the   button.
8Click on the   button.
Settings...
OK
Next 

Installing the LPR (Line Printer Remote) Monitor
19
Windows 2000/XP
Printer Section
9Click on the   button.
10Click on the   button.
11Click on the   button.
Click on the   button.
The printer properties dialog box is closed and
you have now configured the printer as a
network printer.
Finish
Close
Apply
OK 

20
Configuring the Printer Driver Settings
To change the printer settings, open the dialog box for the printer properties by the following steps.
NOTE1. Upon printing, changing the properties of Paper/Layout, Handling, Quality and Device
Options is allowed by clicking Properties in the print dialog box of an application.
2.Sharing Tab in property dialog box is not displayed unless printer sharing has been specified.
Windows 98/Me
1
Click the Start button, point to Settings, and then click
Printers.
2...