Panasonic Software DP-1510P/1810P/1810F/2000/2010E/2500/3000 Operating Instructions

Configuring the Printer Driver Settings
21
Windows 98/Me
Printer Section
General Tab
1.Comment
Enter comments to the properties, if any.
If another user sets up this printer on his or her computer when sharing the printer, the comment specified
here will also appear on that computer. However, the comment displayed for an already set-up user will
remain unchanged even if the comment is modified later.
2.Separator page
This feature is not available on your machine.
3.  button
Prints a test page. This...

Configuring the Printer Driver Settings
22
Windows 98/Me
Details Tab
1.Print to the following port
Displays either the port to which the printer is connected or the path to the network printer.
To change the printing destination, either select the printing destination port from the list or enter the
network path here.
2.Print using the following driver
Displays the type of the printer driver. Specify the printer being used or a printer model which can be
emulated with the printer being used.
3. /...

Configuring the Printer Driver Settings
23
Windows 98/Me
Printer Section
8. button
Specify the method of sending (spool) documents from the program to the printer.
Spool Data Type
Select spool data type (EMF format or RAW format). Specifying RAW format results in longer time
before placing an application operational after printing on the application.
Note: Spooling by EMF format (metafile compression) may cause the following problems on some
application software.
1) Printing result is different from the...

Configuring the Printer Driver Settings
24
Windows 98/Me
Sharing Tab
1.Not Shared/Shared As
Select whether to display or use this printer with other computers.
2.Share Name
Specify the name of the shared printer. The displayed name can be used as it is or a new name may be
entered. The name specified at this time will be displayed when other users view information about the
printer on the network.
3.Comment
You can enter comment regarding a shared printer (such as the type of printer and the location...

Configuring the Printer Driver Settings
25
Windows 98/Me
Printer Section
Device Options Tab
1.Security Print Password (For DP-1810F/2000/2500/3000)
Set the password for Security Print, to enable the feature.
2.Duplex Unit (For DP-2000/2500)
Check this checkbox if the Automatic Duplex Unit (DA-MD200) is installed.
3.Inner Tray (For DP-2000/2500/3000)
Check this checkbox if the Exit Tray (Inner) and the Dual-Path Exit Guide Unit (DA-XN200/FK200) are
installed.
Specifying inner bins, Inner 1 and Inner 2, is...

Configuring the Printer Driver Settings
26
Windows 98/Me
Paper/Layout Tab 
1.Paper Size
Select a document size.
2.Paper Source
Specify where the paper you want to use is located in the machine. If you choose Auto Selection, the
printer driver will automatically select an appropriate tray according to the Paper Size.
3.Orientation
Select the print orientation (Portrait/Landscape).
4.Copies (1-999)
Specify the number of copies to be printed. If the number of copies to be printed can be specified within
the...

Configuring the Printer Driver Settings
27
Windows 98/Me
Printer Section
6.Magnify
Select a fixed enlargement/reduction ratio according to the paper size. Specifying the magnification ratio
changes the Zoom to display the actual enlargement/reduction percentage.
7.N in 1
Specify the layout pattern for printing multiple documents on a single sheet of paper.
Selecting 2 in 1 or 4 in 1 changes the Zoom to display the actual enlargement/reduction percentage.
Note: 2 in 1 or 4 in 1 allows the user to select...

Configuring the Printer Driver Settings
28
Windows 98/Me
Handling Tab
1.Sorter
Select whether to Stack or Sort when printing multiple copies.
Note 1) When the Staple is set to On, the Rotate-Sort and Shift-Sort is not activated even if it is
selected.
2) Shift-Sort is not available on DP-1510P/1810P/1810F/2010E.
2.Printing on both sides (Duplex) (For DP-2000/2010E/2500/3000)
Select duplex printing for printing on both sides.
Note 1) Duplex Printing is allowed only when the Dual-Path Exit Guide Unit,...

Configuring the Printer Driver Settings
29
Windows 98/Me
Printer Section
6.Staple (For DP-2000/2500/3000)
Specifying staple printing is allowed if the output bin is set to outer.
Note 1) Staple printing is allowed only with Electronic Sorting Board (DA-ES200 : For DP-2000 only) and
1-Bin Finisher (DA-FS200) mounted.
2) Select Sort in the sort menu.
3) Paper is stapled at the top left or at the top right. (See table below.)
Document orientation Paper orientation  Stapling position
Letter
A4
Letter...

Configuring the Printer Driver Settings
30
Windows 98/Me
7.Image Overlay
Select if you want to use the Overlay feature for printing.
Checking the Save As Overlay check box will save the page to be printed as an overlay image to the
selected Image Name.
To Save an Overlay Image
1. Create or open an existing file from your application.
2. When you are ready to save the page as an Overlay Image, from the Menu bar, select File | Print.
3. The Print dialog box appears. Select the Panafax facsimile unit...